cxp GW: remove unused debug port

src/gateware/cxp.py

@@ -28,9 +28,9 @@ class CXP_PHYS(Module, AutoCSR):
         
 
 class CXP_Core(Module, AutoCSR):
-    def __init__(self, phy, debug_sma, pmod_pads):
-        self.submodules.tx = TX_Pipeline(phy.tx, debug_sma, pmod_pads)
-        self.submodules.rx = RX_Pipeline(phy.rx, debug_sma, pmod_pads)
+    def __init__(self, phy):
+        self.submodules.tx = TX_Pipeline(phy.tx)
+        self.submodules.rx = RX_Pipeline(phy.rx)
 
     def get_tx_port(self):
         return self.tx.writer.mem.get_port(write_capable=True)
@@ -59,7 +59,7 @@ class CXP_Core(Module, AutoCSR):
 
 class CXP_Master(CXP_Core):
     def __init__(self, phy, debug_sma, pmod_pads):
-        CXP_Core.__init__(self, phy, debug_sma, pmod_pads)
+        CXP_Core.__init__(self, phy)
         nbit_trigdelay = 8
         nbit_linktrig = 1
 
@@ -81,12 +81,12 @@ class CXP_Master(CXP_Core):
         # self.specials += Instance("OBUF", i_I=self.rtlink.o.stb, o_O=debug_sma.n_rx),
 
 class CXP_Extension(CXP_Core):
-    def __init__(self, phy, debug_sma, pmod_pads):
-        CXP_Core.__init__(self, phy, debug_sma, pmod_pads)
+    def __init__(self, phy):
+        CXP_Core.__init__(self, phy)
 
 
 class RX_Pipeline(Module, AutoCSR):
-    def __init__(self, phy, debug_sma, pmod_pads):
+    def __init__(self, phy):
         self.ready = CSRStatus()
 
         # # #
@@ -221,13 +221,6 @@ class RX_Pipeline(Module, AutoCSR):
             )
         ]
         
-        # DEBUG: 
-        # # add buffer to improve timing & reduce tight setup/hold time
-        # self.submodules.buffer_cdc_fifo = buffer_cdc_fifo = cdr(Buffer(word_layout_dchar))
-        # cdc_fifo = stream.AsyncFIFO(word_layout_dchar, 512)
-        # self.submodules += ClockDomainsRenamer({"write": "cxp_gtx_rx", "read": "sys"})(cdc_fifo)
-        # self.submodules.debug_out = debug_out = RX_Debug_Buffer(word_layout_dchar)
-         
         # Drop the K29.7 and mark the EOP for arbiter and crc cheker
         self.submodules.eop_marker = eop_marker = cdr(EOP_Marker())
 
@@ -247,7 +240,7 @@ class RX_Pipeline(Module, AutoCSR):
 
         
 class TX_Pipeline(Module, AutoCSR):
-    def __init__(self, phy, debug_sma, pmod_pads):
+    def __init__(self, phy):
         # Transmission Pipeline
         #
         #              32                                                  32           8
@@ -269,25 +262,10 @@ class TX_Pipeline(Module, AutoCSR):
         # 0: Trigger packet
         self.submodules.trig = trig = Trigger_Inserter()
         
-        # # DEBUG: INPUT
-        self.trig_stb = CSR()
-        self.trig_delay = CSRStorage(8) 
-        self.linktrigger = CSRStorage()
 
-        # self.sync += [
-        #     trig.stb.eq(self.trig_stb.re),
-        #     trig.delay.eq(self.trig_delay.storage),
-        #     trig.linktrig_mode.eq(self.linktrigger.storage),
-        # ]
-
-        
         # 1: IO acknowledgment for trigger packet
         self.submodules.trig_ack = trig_ack = Trigger_ACK_Inserter()
 
-        # DEBUG: INPUT
-        self.ack = CSR()
-        self.sync += trig_ack.stb.eq(self.ack.re),
-
 
         # 2: All other packets (data & test packet)
         # Control is not timing dependent, all the data packets are handled in firmware