downconn GW: move rx reset out of comma checker

rx reset: only active for singe/master rx
comma checker: rename to aligner & active on all rx config

src/gateware/cxp_downconn.py

@@ -58,7 +58,7 @@ class Receiver(Module):
 
         data_valid = Signal()
         self.sync.cxp_gtx_rx += [
-            data_valid.eq(gtx.comma_checker.rxfsm.ongoing("READY")),
+            data_valid.eq(gtx.comma_aligner.rxfsm.ongoing("READY")),
 
             self.source.stb.eq(0),
             If(data_valid & self.source.ack & ~((gtx.decoders[0].d == 0xBC) & (gtx.decoders[0].k == 1)),
@@ -218,9 +218,33 @@ class QPLL(Module, AutoCSR):
             ),
         ]
 
+
+class RX_Resetter(Module):
+    def __init__(self, reset_period=10_000_000):
+        self.rx_ready = Signal()
+        self.rx_reset = Signal()
+
+        # # #
+
+        # periodically reset rx until rx is connected and receiving valid data
+        # as after connecting RXP/RXN, the whole RX need to be reset 
+        
+        reset_counter = Signal(reset=reset_period-1, max=reset_period)
+        self.sync += [
+            self.rx_reset.eq(0),
+            If(~self.rx_ready,
+                If(reset_counter == 0,
+                    reset_counter.eq(reset_counter.reset),
+                    self.rx_reset.eq(1),
+                ).Else(
+                    reset_counter.eq(reset_counter - 1),
+                )
+            )
+        ]
+
 # Warning: Xilinx transceivers are LSB first, and comma needs to be flipped
 # compared to the usual 8b10b binary representation.
-class Comma_Checker(Module):
+class Comma_Aligner(Module):
     def __init__(self, comma, reset_period=10_000_000):
         self.data = Signal(20)
         self.comma_aligned = Signal()
@@ -229,28 +253,9 @@ class Comma_Checker(Module):
 
         self.aligner_en = Signal()
         self.ready_sys = Signal()
-        self.restart_sys = Signal()
 
         # # #
 
-
-        # periodically reset rx until rx is connected and receiving valid data
-        # as after connecting RXP/RXN, the whole RX need to be reset 
-        
-        reset_counter = Signal(reset=reset_period-1, max=reset_period)
-        self.sync += [
-            self.restart_sys.eq(0),
-            If(~self.ready_sys,
-                If(reset_counter == 0,
-                    reset_counter.eq(reset_counter.reset),
-                    self.restart_sys.eq(1),
-                ).Else(
-                    reset_counter.eq(reset_counter - 1),
-                )
-            )
-        ]
-
-
         # Data and comma checker
         # From UG476 (v1.12.1) p.228
         # The built-in RXBYTEISALIGNED can be falsely asserted at linerate higher than 5Gbps
@@ -694,14 +699,29 @@ class GTX(Module):
             Instance("BUFG", i_I=txpll_clkout, o_O=self.cd_cxp_gtx_tx.clk),
             AsyncResetSynchronizer(self.cd_cxp_gtx_tx, ~self.txpll_locked & ~tx_init.done)
         ]
+        self.comb += tx_init.restart.eq(self.tx_restart)
 
         # RX clocking
         # the CDR matches the required frequency for RXUSRCLK, no need for PLL 
+
+        # Slave Rx will use cxp_gtx_rx instead
+        if rx_mode == "single" or rx_mode == "master":
             self.clock_domains.cd_cxp_gtx_rx = ClockDomain()
             self.specials += [
                 Instance("BUFG", i_I=self.rxoutclk, o_O=self.cd_cxp_gtx_rx.clk),
                 AsyncResetSynchronizer(self.cd_cxp_gtx_rx, ~rx_init.done)
             ]
+            self.submodules.rx_resetter = rx_resetter = RX_Resetter()
+            self.comb += [
+                rx_resetter.rx_ready.eq(self.rx_ready),
+                rx_init.restart.eq(self.rx_restart | rx_resetter.rx_reset),
+            ]
+        else:
+            self.comb += rx_init.restart.eq(self.rx_restart),
+
+
+
+        # 8b10b Encoder/Decoder
 
         self.comb += [
             txdata.eq(Cat(self.encoder.output[0], self.encoder.output[1], self.encoder.output[2], self.encoder.output[3])),
@@ -711,16 +731,12 @@ class GTX(Module):
             self.decoders[3].input.eq(rxdata[30:]),
         ]
 
-
-        self.submodules.comma_checker = comma_checker = Comma_Checker(0b0101111100)
+        self.submodules.comma_aligner = comma_aligner = Comma_Aligner(0b0101111100)
         self.comb += [
-            comma_checker.data.eq(rxdata),
-            comma_checker.comma_aligned.eq(comma_aligned),
-            comma_checker.comma_realigned.eq(comma_realigned),
-            comma_checker.comma_det.eq(comma_det),
-            comma_aligner_en.eq(comma_checker.aligner_en),
-            self.rx_ready.eq(comma_checker.ready_sys),
-
-            rx_init.restart.eq(self.rx_restart | comma_checker.restart_sys),
-            tx_init.restart.eq(self.tx_restart),
+            comma_aligner.data.eq(rxdata),
+            comma_aligner.comma_aligned.eq(comma_aligned),
+            comma_aligner.comma_realigned.eq(comma_realigned),
+            comma_aligner.comma_det.eq(comma_det),
+            comma_aligner_en.eq(comma_aligner.aligner_en),
+            self.rx_ready.eq(comma_aligner.ready_sys),
         ]