si549 gateware

kasli_soc: add --with-wrpll arg to switch from si5324 to si549
kasli_soc: default to use si5435
kasli_soc: add main and helper si549 for satellite
si549: add i2c and adpll programmer

src/gateware/kasli_soc.py

@@ -26,6 +26,7 @@ import analyzer
 import acpki
 import drtio_aux_controller
 import zynq_clocking
+import si549
 from config import write_csr_file, write_mem_file, write_rustc_cfg_file
 
 eem_iostandard_dict = {
@@ -105,7 +106,7 @@ class GTPBootstrapClock(Module):
 
 
 class GenericStandalone(SoCCore):
-    def __init__(self, description, acpki=False):
+    def __init__(self, description, acpki=False, with_wrpll=False):
         self.acpki = acpki
         clk_freq = description["rtio_frequency"]
 
@@ -205,7 +206,7 @@ class GenericStandalone(SoCCore):
 
 
 class GenericMaster(SoCCore):
-    def __init__(self, description, acpki=False):
+    def __init__(self, description, acpki=False, with_wrpll=False):
         clk_freq = description["rtio_frequency"]
 
         has_drtio_over_eem = any(peripheral["type"] == "shuttler" for peripheral in description["peripherals"])
@@ -398,7 +399,7 @@ class GenericMaster(SoCCore):
 
 
 class GenericSatellite(SoCCore):
-    def __init__(self, description, acpki=False):
+    def __init__(self, description, acpki=False, with_wrpll=False):
         clk_freq = description["rtio_frequency"]
 
         self.acpki = acpki
@@ -551,14 +552,19 @@ class GenericSatellite(SoCCore):
         self.config["RTIO_FREQUENCY"] = str(clk_freq/1e6)
         self.config["CLOCK_FREQUENCY"] = int(clk_freq)
 
-        self.submodules.siphaser = SiPhaser7Series(
+        if with_wrpll:
-            si5324_clkin=platform.request("cdr_clk"),
+            self.submodules.main_dcxo = si549.Si549(platform.request("ddmtd_main_dcxo_i2c"))
-            rx_synchronizer=self.rx_synchronizer,
+            self.submodules.helper_dcxo = si549.Si549(platform.request("ddmtd_helper_dcxo_i2c"))
-            ultrascale=False,
+            self.config["HAS_SI549"] = None
-            rtio_clk_freq=self.gt_drtio.rtio_clk_freq)
+        else:
-        self.csr_devices.append("siphaser")
+            self.submodules.siphaser = SiPhaser7Series(
-        self.config["HAS_SI5324"] = None
+                si5324_clkin=platform.request("cdr_clk"),
-        self.config["SI5324_SOFT_RESET"] = None
+                rx_synchronizer=self.rx_synchronizer,
+                ultrascale=False,
+                rtio_clk_freq=self.gt_drtio.rtio_clk_freq)
+            self.csr_devices.append("siphaser")
+            self.config["HAS_SI5324"] = None
+            self.config["SI5324_SOFT_RESET"] = None
 
         gtx0 = self.gt_drtio.gtxs[0]
         platform.add_false_path_constraints(
@@ -588,6 +594,8 @@ def main():
         help="build gateware into the specified directory")
     parser.add_argument("--acpki", default=False, action="store_true",
         help="enable ACPKI")
+    parser.add_argument("--with-wrpll", default=False, action="store_true",
+        help="enable WRPLL")
     parser.add_argument("description", metavar="DESCRIPTION",
                         help="JSON system description file")
     args = parser.parse_args()
@@ -605,7 +613,7 @@ def main():
     else:
         raise ValueError("Invalid DRTIO role")
 
-    soc = cls(description, acpki=args.acpki)
+    soc = cls(description, acpki=args.acpki, with_wrpll=args.with_wrpll)
     soc.finalize()
 
     if args.r is not None:

src/gateware/si549.py

@@ -0,0 +1,278 @@
+from migen import *
+from migen.genlib.fsm import *
+
+from misoc.interconnect.csr import *
+
+
+class I2CClockGen(Module):
+    def __init__(self, width):
+        self.load = Signal(width)
+        self.clk2x = Signal()
+
+        cnt = Signal.like(self.load)
+        self.comb += [
+            self.clk2x.eq(cnt == 0),
+        ]
+        self.sync += [
+            If(self.clk2x,
+                cnt.eq(self.load),
+            ).Else(
+                cnt.eq(cnt - 1),
+            )
+        ]
+
+
+class I2CMasterMachine(Module):
+    def __init__(self, clock_width):
+        self.scl = Signal(reset=1)
+        self.sda_o = Signal(reset=1)
+        self.sda_i = Signal()
+
+        self.submodules.cg = CEInserter()(I2CClockGen(clock_width))
+        self.start = Signal()
+        self.stop = Signal()
+        self.write = Signal()
+        self.ack = Signal()
+        self.data = Signal(8)
+        self.ready = Signal()
+
+        # # #
+
+        bits = Signal(4)
+        data = Signal(8)
+
+        fsm = CEInserter()(FSM("IDLE"))
+        self.submodules += fsm
+
+        fsm.act("IDLE",
+            self.ready.eq(1),
+            If(self.start,
+                NextState("START0"),
+            ).Elif(self.stop,
+                NextState("STOP0"),
+            ).Elif(self.write,
+                NextValue(bits, 8),
+                NextValue(data, self.data),
+                NextState("WRITE0")
+            )
+        )
+
+        fsm.act("START0",
+            NextValue(self.scl, 1),
+            NextState("START1")
+        )
+        fsm.act("START1",
+            NextValue(self.sda_o, 0),
+            NextState("IDLE")
+        )
+
+        fsm.act("STOP0",
+            NextValue(self.scl, 0),
+            NextState("STOP1")
+        )
+        fsm.act("STOP1",
+            NextValue(self.sda_o, 0),
+            NextState("STOP2")
+        )
+        fsm.act("STOP2",
+            NextValue(self.scl, 1), 
+            NextState("STOP3")
+        )
+        fsm.act("STOP3",
+            NextValue(self.sda_o, 1),
+            NextState("IDLE")
+        )
+
+        fsm.act("WRITE0",
+            NextValue(self.scl, 0),
+            NextState("WRITE1")
+        )
+        fsm.act("WRITE1",
+            If(bits == 0,
+                NextValue(self.sda_o, 1),
+                NextState("READACK0"),
+            ).Else(
+                NextValue(self.sda_o, data[7]),
+                NextState("WRITE2"),
+            )
+        )
+        fsm.act("WRITE2",
+            NextValue(self.scl, 1),
+            NextValue(data[1:], data[:-1]),
+            NextValue(bits, bits - 1),
+            NextState("WRITE0"),
+        )
+        fsm.act("READACK0",
+            NextValue(self.scl, 1),
+            NextState("READACK1"),
+        )
+        fsm.act("READACK1",
+            NextValue(self.ack, ~self.sda_i),
+            NextState("IDLE")
+        )
+
+        run = Signal()
+        idle = Signal()
+        self.comb += [
+            run.eq((self.start | self.stop | self.write) & self.ready),
+            idle.eq(~run & fsm.ongoing("IDLE")),
+            self.cg.ce.eq(~idle),
+            fsm.ce.eq(run | self.cg.clk2x),
+        ]
+
+
+class ADPLLProgrammer(Module):
+    def __init__(self):
+        self.i2c_divider = Signal(16)
+        self.i2c_address = Signal(7)
+
+        self.adpll = Signal(24)
+        self.stb = Signal()
+        self.busy = Signal()
+        self.nack = Signal()
+
+        self.scl = Signal()
+        self.sda_i = Signal()
+        self.sda_o = Signal()
+
+        # # #
+
+        master = I2CMasterMachine(16)
+        self.submodules += master
+
+        self.comb += [
+            master.cg.load.eq(self.i2c_divider),
+            self.scl.eq(master.scl),
+            master.sda_i.eq(self.sda_i),
+            self.sda_o.eq(master.sda_o)
+        ]
+
+        fsm = FSM()
+        self.submodules += fsm
+
+        adpll = Signal.like(self.adpll)
+
+        fsm.act("IDLE",
+            If(self.stb,
+                NextValue(adpll, self.adpll),
+                NextState("START")
+            )
+        )
+        fsm.act("START",
+            master.start.eq(1),
+            If(master.ready, NextState("DEVADDRESS"))
+        )
+        fsm.act("DEVADDRESS",
+            master.data.eq(self.i2c_address << 1),
+            master.write.eq(1),
+            If(master.ready, NextState("REGADRESS"))
+        )
+        fsm.act("REGADRESS",
+            master.data.eq(231),
+            master.write.eq(1),
+            If(master.ready,
+                If(master.ack,
+                    NextState("DATA0")
+                ).Else(
+                    self.nack.eq(1),
+                    NextState("STOP")
+                )
+            )
+        )
+        fsm.act("DATA0",
+            master.data.eq(adpll[0:8]),
+            master.write.eq(1),
+            If(master.ready,
+                If(master.ack,
+                    NextState("DATA1")
+                ).Else(
+                    self.nack.eq(1),
+                    NextState("STOP")
+                )
+            )
+        )
+        fsm.act("DATA1",
+            master.data.eq(adpll[8:16]),
+            master.write.eq(1),
+            If(master.ready,
+                If(master.ack,
+                    NextState("DATA2")
+                ).Else(
+                    self.nack.eq(1),
+                    NextState("STOP")
+                )
+            )
+        )
+        fsm.act("DATA2",
+            master.data.eq(adpll[16:24]),
+            master.write.eq(1),
+            If(master.ready,
+                If(~master.ack, self.nack.eq(1)),
+                NextState("STOP")
+            )
+        )
+        fsm.act("STOP",
+            master.stop.eq(1),
+            If(master.ready,
+                If(~master.ack, self.nack.eq(1)),
+                NextState("IDLE")
+            )
+        )
+
+        self.comb += self.busy.eq(~fsm.ongoing("IDLE"))
+
+
+class Si549(Module, AutoCSR):
+    def __init__(self, pads):
+        self.i2c_divider = CSRStorage(16, reset=75)
+        self.i2c_address = CSRStorage(7)
+
+        self.adpll = CSRStorage(24)
+        self.adpll_stb = CSRStorage()
+        self.adpll_busy = CSRStatus()
+        self.nack = CSRStatus()
+
+        self.bitbang_enable = CSRStorage()
+
+        self.sda_oe = CSRStorage()
+        self.sda_out = CSRStorage()
+        self.sda_in = CSRStatus()
+        self.scl_oe = CSRStorage()
+        self.scl_out = CSRStorage()
+
+        # # #
+
+        self.submodules.programmer = ADPLLProgrammer()
+
+        self.comb += [
+            self.programmer.i2c_divider.eq(self.i2c_divider.storage),
+            self.programmer.i2c_address.eq(self.i2c_address.storage),
+            self.programmer.adpll.eq(self.adpll.storage),
+            self.programmer.stb.eq(self.adpll_stb.storage),
+            self.adpll_busy.status.eq(self.programmer.busy),
+            self.nack.status.eq(self.programmer.nack)
+        ]
+
+        # I2C with bitbang/gateware mode select
+        sda_t = TSTriple(1)
+        scl_t = TSTriple(1)
+        self.specials += [
+            sda_t.get_tristate(pads.sda),
+            scl_t.get_tristate(pads.scl)
+        ]
+
+        self.comb += [
+            If(self.bitbang_enable.storage,
+                sda_t.oe.eq(self.sda_oe.storage),
+                sda_t.o.eq(self.sda_out.storage),
+                self.sda_in.status.eq(sda_t.i),
+                scl_t.oe.eq(self.scl_oe.storage),
+                scl_t.o.eq(self.scl_out.storage)
+            ).Else(
+                sda_t.oe.eq(~self.programmer.sda_o),
+                sda_t.o.eq(0),
+                self.programmer.sda_i.eq(sda_t.i),
+                scl_t.oe.eq(~self.programmer.scl),
+                scl_t.o.eq(0),
+            )
+        ]