forked from M-Labs/artiq-zynq
cxp_phys: low speed serial & GTX setup
downconn: add QPLL & GTX setup downconn: add DRP to change linerate up to 12.5Gbps downconn testing: add txuserclk config upconn: add low speed serital setup upconn & downconn: add linerate changer
This commit is contained in:
parent
df572de4db
commit
23e3b97572
|
|
@ -0,0 +1,491 @@
|
|||
use embedded_hal::prelude::_embedded_hal_blocking_delay_DelayUs;
|
||||
use libboard_zynq::{println, timer::GlobalTimer};
|
||||
use log::info;
|
||||
|
||||
use crate::pl::{csr, csr::CXP};
|
||||
|
||||
const CHANNEL_LEN: usize = csr::CXP_LEN;
|
||||
|
||||
#[derive(Clone, Copy, Debug)]
|
||||
#[allow(non_camel_case_types)]
|
||||
pub enum CXP_SPEED {
|
||||
CXP_1,
|
||||
CXP_2,
|
||||
CXP_3,
|
||||
CXP_5,
|
||||
CXP_6,
|
||||
CXP_10,
|
||||
CXP_12,
|
||||
}
|
||||
|
||||
pub fn setup(timer: &mut GlobalTimer) {
|
||||
down_conn::setup(timer);
|
||||
up_conn::setup();
|
||||
change_linerate(CXP_SPEED::CXP_1);
|
||||
}
|
||||
|
||||
pub fn change_linerate(speed: CXP_SPEED) {
|
||||
info!("Changing all channels datarate to {:?}", speed);
|
||||
down_conn::change_linerate(speed);
|
||||
up_conn::change_linerate(speed);
|
||||
}
|
||||
|
||||
mod up_conn {
|
||||
use super::*;
|
||||
|
||||
pub fn setup() {
|
||||
unsafe {
|
||||
csr::cxp_phys::upconn_tx_enable_write(1);
|
||||
}
|
||||
}
|
||||
|
||||
pub fn change_linerate(speed: CXP_SPEED) {
|
||||
unsafe {
|
||||
match speed {
|
||||
CXP_SPEED::CXP_1 | CXP_SPEED::CXP_2 | CXP_SPEED::CXP_3 | CXP_SPEED::CXP_5 | CXP_SPEED::CXP_6 => {
|
||||
csr::cxp_phys::upconn_bitrate2x_enable_write(0);
|
||||
}
|
||||
CXP_SPEED::CXP_10 | CXP_SPEED::CXP_12 => {
|
||||
csr::cxp_phys::upconn_bitrate2x_enable_write(1);
|
||||
}
|
||||
};
|
||||
csr::cxp_phys::upconn_clk_reset_write(1);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
mod down_conn {
|
||||
use super::*;
|
||||
|
||||
pub fn setup(timer: &mut GlobalTimer) {
|
||||
unsafe {
|
||||
info!("turning on pmc loopback mode...");
|
||||
for channel in 0..CHANNEL_LEN {
|
||||
(CXP[channel].downconn_loopback_mode_write)(0b010); // Near-End PMA Loopback
|
||||
}
|
||||
|
||||
// QPLL setup
|
||||
csr::cxp_phys::downconn_qpll_reset_write(1);
|
||||
info!("waiting for QPLL/CPLL to lock...");
|
||||
while csr::cxp_phys::downconn_qpll_locked_read() != 1 {}
|
||||
info!("QPLL locked");
|
||||
|
||||
for channel in 0..CHANNEL_LEN {
|
||||
// tx/rx setup
|
||||
(CXP[channel].downconn_tx_start_init_write)(1);
|
||||
(CXP[channel].downconn_rx_start_init_write)(1);
|
||||
}
|
||||
|
||||
// DEBUG: printout
|
||||
info!("waiting for tx & rx setup...");
|
||||
timer.delay_us(50_000);
|
||||
for channel in 0..CHANNEL_LEN {
|
||||
info!(
|
||||
"tx_phaligndone = {} | rx_phaligndone = {}",
|
||||
(CXP[channel].downconn_txinit_phaligndone_read)(),
|
||||
(CXP[channel].downconn_rxinit_phaligndone_read)(),
|
||||
);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
pub fn change_linerate(speed: CXP_SPEED) {
|
||||
// DEBUG: DRP pll for TXUSRCLK = freq(linerate)/20
|
||||
let settings = txusrclk::get_txusrclk_config(speed);
|
||||
txusrclk::setup(settings);
|
||||
|
||||
change_qpll_fb_divider(speed);
|
||||
change_gtx_divider(speed);
|
||||
change_cdr_cfg(speed);
|
||||
|
||||
unsafe {
|
||||
csr::cxp_phys::downconn_qpll_reset_write(1);
|
||||
info!("waiting for QPLL/CPLL to lock...");
|
||||
while csr::cxp_phys::downconn_qpll_locked_read() != 1 {}
|
||||
info!("QPLL locked");
|
||||
|
||||
for channel in 0..CHANNEL_LEN {
|
||||
(CXP[channel].downconn_tx_restart_write)(1);
|
||||
(CXP[channel].downconn_rx_restart_write)(1);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
fn change_qpll_fb_divider(speed: CXP_SPEED) {
|
||||
let qpll_div_reg = match speed {
|
||||
CXP_SPEED::CXP_1 | CXP_SPEED::CXP_2 | CXP_SPEED::CXP_5 | CXP_SPEED::CXP_10 => 0x0120, // FB_Divider = 80
|
||||
CXP_SPEED::CXP_3 | CXP_SPEED::CXP_6 | CXP_SPEED::CXP_12 => 0x0170, // FB_Divider = 100
|
||||
};
|
||||
|
||||
println!("0x36 = {:#06x}", qpll_read(0x36));
|
||||
qpll_write(0x36, qpll_div_reg);
|
||||
println!("0x36 = {:#06x}", qpll_read(0x36));
|
||||
}
|
||||
|
||||
fn change_gtx_divider(speed: CXP_SPEED) {
|
||||
let div_reg = match speed {
|
||||
CXP_SPEED::CXP_1 => 0x33, // RXOUT_DIV = 8
|
||||
CXP_SPEED::CXP_2 | CXP_SPEED::CXP_3 => 0x22, // RXOUT_DIV = 4
|
||||
CXP_SPEED::CXP_5 | CXP_SPEED::CXP_6 => 0x11, // RXOUT_DIV = 2
|
||||
CXP_SPEED::CXP_10 | CXP_SPEED::CXP_12 => 0x00, // RXOUT_DIV = 1
|
||||
};
|
||||
|
||||
for channel in 0..CHANNEL_LEN {
|
||||
println!("channel {}, 0x88 = {:#06x}", channel, gtx_read(channel, 0x88));
|
||||
gtx_write(channel, 0x88, div_reg);
|
||||
println!("channel {}, 0x88 = {:#06x}", channel, gtx_read(channel, 0x88));
|
||||
}
|
||||
}
|
||||
|
||||
fn change_cdr_cfg(speed: CXP_SPEED) {
|
||||
struct CdrConfig {
|
||||
pub cfg_reg0: u16, // addr = 0xA8
|
||||
pub cfg_reg1: u16, // addr = 0xA9
|
||||
pub cfg_reg2: u16, // addr = 0xAA
|
||||
pub cfg_reg3: u16, // addr = 0xAB
|
||||
pub cfg_reg4: u16, // addr = 0xAC
|
||||
}
|
||||
|
||||
let cdr_cfg = match speed {
|
||||
// when RXOUT_DIV = 8
|
||||
CXP_SPEED::CXP_1 => CdrConfig {
|
||||
cfg_reg0: 0x0020,
|
||||
cfg_reg1: 0x1008,
|
||||
cfg_reg2: 0x23FF,
|
||||
cfg_reg3: 0x0000,
|
||||
cfg_reg4: 0x0003,
|
||||
},
|
||||
// when RXOUT_DIV = 4
|
||||
CXP_SPEED::CXP_2 | CXP_SPEED::CXP_5 => CdrConfig {
|
||||
cfg_reg0: 0x0020,
|
||||
cfg_reg1: 0x1010,
|
||||
cfg_reg2: 0x23FF,
|
||||
cfg_reg3: 0x0000,
|
||||
cfg_reg4: 0x0003,
|
||||
},
|
||||
// when RXOUT_DIV= 2
|
||||
CXP_SPEED::CXP_3 | CXP_SPEED::CXP_6 => CdrConfig {
|
||||
cfg_reg0: 0x0020,
|
||||
cfg_reg1: 0x1020,
|
||||
cfg_reg2: 0x23FF,
|
||||
cfg_reg3: 0x0000,
|
||||
cfg_reg4: 0x0003,
|
||||
},
|
||||
// when RXOUT_DIV= 1
|
||||
CXP_SPEED::CXP_10 | CXP_SPEED::CXP_12 => CdrConfig {
|
||||
cfg_reg0: 0x0020,
|
||||
cfg_reg1: 0x1040,
|
||||
cfg_reg2: 0x23FF,
|
||||
cfg_reg3: 0x0000,
|
||||
cfg_reg4: 0x000B,
|
||||
},
|
||||
};
|
||||
|
||||
for channel in 0..CHANNEL_LEN {
|
||||
gtx_write(channel, 0x0A8, cdr_cfg.cfg_reg0);
|
||||
gtx_write(channel, 0x0A9, cdr_cfg.cfg_reg1);
|
||||
gtx_write(channel, 0x0AA, cdr_cfg.cfg_reg2);
|
||||
gtx_write(channel, 0x0AB, cdr_cfg.cfg_reg3);
|
||||
gtx_write(channel, 0x0AC, cdr_cfg.cfg_reg4);
|
||||
}
|
||||
}
|
||||
|
||||
#[allow(dead_code)]
|
||||
fn gtx_read(channel: usize, address: u16) -> u16 {
|
||||
unsafe {
|
||||
(CXP[channel].downconn_gtx_daddr_write)(address);
|
||||
(CXP[channel].downconn_gtx_dread_write)(1);
|
||||
while (CXP[channel].downconn_gtx_dready_read)() != 1 {}
|
||||
(CXP[channel].downconn_gtx_dout_read)()
|
||||
}
|
||||
}
|
||||
|
||||
fn gtx_write(channel: usize, address: u16, value: u16) {
|
||||
unsafe {
|
||||
(CXP[channel].downconn_gtx_daddr_write)(address);
|
||||
(CXP[channel].downconn_gtx_din_write)(value);
|
||||
(CXP[channel].downconn_gtx_din_stb_write)(1);
|
||||
while (CXP[channel].downconn_gtx_dready_read)() != 1 {}
|
||||
}
|
||||
}
|
||||
|
||||
#[allow(dead_code)]
|
||||
fn qpll_read(address: u8) -> u16 {
|
||||
unsafe {
|
||||
csr::cxp_phys::downconn_qpll_daddr_write(address);
|
||||
csr::cxp_phys::downconn_qpll_dread_write(1);
|
||||
while csr::cxp_phys::downconn_qpll_dready_read() != 1 {}
|
||||
csr::cxp_phys::downconn_qpll_dout_read()
|
||||
}
|
||||
}
|
||||
|
||||
fn qpll_write(address: u8, value: u16) {
|
||||
unsafe {
|
||||
csr::cxp_phys::downconn_qpll_daddr_write(address);
|
||||
csr::cxp_phys::downconn_qpll_din_write(value);
|
||||
csr::cxp_phys::downconn_qpll_din_stb_write(1);
|
||||
while csr::cxp_phys::downconn_qpll_dready_read() != 1 {}
|
||||
}
|
||||
}
|
||||
|
||||
// DEBUG: remove this
|
||||
pub mod txusrclk {
|
||||
use super::*;
|
||||
|
||||
#[derive(Copy, Clone)]
|
||||
pub struct PLLSetting {
|
||||
pub clkout0_reg1: u16, //0x08
|
||||
pub clkout0_reg2: u16, //0x09
|
||||
pub clkfbout_reg1: u16, //0x14
|
||||
pub clkfbout_reg2: u16, //0x15
|
||||
pub div_reg: u16, //0x16
|
||||
pub lock_reg1: u16, //0x18
|
||||
pub lock_reg2: u16, //0x19
|
||||
pub lock_reg3: u16, //0x1A
|
||||
pub power_reg: u16, //0x28
|
||||
pub filt_reg1: u16, //0x4E
|
||||
pub filt_reg2: u16, //0x4F
|
||||
}
|
||||
|
||||
fn one_clock_cycle(channel: usize) {
|
||||
unsafe {
|
||||
(CXP[channel].downconn_pll_dclk_write)(1);
|
||||
(CXP[channel].downconn_pll_dclk_write)(0);
|
||||
}
|
||||
}
|
||||
|
||||
fn set_addr(channel: usize, address: u8) {
|
||||
unsafe {
|
||||
(CXP[channel].downconn_pll_daddr_write)(address);
|
||||
}
|
||||
}
|
||||
|
||||
fn set_data(channel: usize, value: u16) {
|
||||
unsafe {
|
||||
(CXP[channel].downconn_pll_din_write)(value);
|
||||
}
|
||||
}
|
||||
|
||||
fn set_enable(channel: usize, en: bool) {
|
||||
unsafe {
|
||||
let val = if en { 1 } else { 0 };
|
||||
(CXP[channel].downconn_pll_den_write)(val);
|
||||
}
|
||||
}
|
||||
|
||||
fn set_write_enable(channel: usize, en: bool) {
|
||||
unsafe {
|
||||
let val = if en { 1 } else { 0 };
|
||||
(CXP[channel].downconn_pll_dwen_write)(val);
|
||||
}
|
||||
}
|
||||
|
||||
fn get_data(channel: usize) -> u16 {
|
||||
unsafe { (CXP[channel].downconn_pll_dout_read)() }
|
||||
}
|
||||
|
||||
fn drp_ready(channel: usize) -> bool {
|
||||
unsafe { (CXP[channel].downconn_pll_dready_read)() == 1 }
|
||||
}
|
||||
|
||||
#[allow(dead_code)]
|
||||
fn read(channel: usize, address: u8) -> u16 {
|
||||
set_addr(channel, address);
|
||||
set_enable(channel, true);
|
||||
// Set DADDR on the mmcm and assert DEN for one clock cycle
|
||||
one_clock_cycle(channel);
|
||||
|
||||
set_enable(channel, false);
|
||||
while !drp_ready(channel) {
|
||||
// keep the clock signal until data is ready
|
||||
one_clock_cycle(channel);
|
||||
}
|
||||
get_data(channel)
|
||||
}
|
||||
|
||||
fn write(channel: usize, address: u8, value: u16) {
|
||||
set_addr(channel, address);
|
||||
set_data(channel, value);
|
||||
set_write_enable(channel, true);
|
||||
set_enable(channel, true);
|
||||
// Set DADDR, DI on the mmcm and assert DWE, DEN for one clock cycle
|
||||
one_clock_cycle(channel);
|
||||
|
||||
set_write_enable(channel, false);
|
||||
set_enable(channel, false);
|
||||
while !drp_ready(channel) {
|
||||
// keep the clock signal until write is finished
|
||||
one_clock_cycle(channel);
|
||||
}
|
||||
}
|
||||
|
||||
fn reset(channel: usize, rst: bool) {
|
||||
unsafe {
|
||||
let val = if rst { 1 } else { 0 };
|
||||
(CXP[channel].downconn_txpll_reset_write)(val)
|
||||
}
|
||||
}
|
||||
|
||||
pub fn setup(settings: PLLSetting) {
|
||||
for channel in 0..CHANNEL_LEN {
|
||||
if false {
|
||||
info!("0x08 = {:#06x}", read(channel, 0x08));
|
||||
info!("0x09 = {:#06x}", read(channel, 0x09));
|
||||
info!("0x14 = {:#06x}", read(channel, 0x14));
|
||||
info!("0x15 = {:#06x}", read(channel, 0x15));
|
||||
info!("0x16 = {:#06x}", read(channel, 0x16));
|
||||
info!("0x18 = {:#06x}", read(channel, 0x18));
|
||||
info!("0x19 = {:#06x}", read(channel, 0x19));
|
||||
info!("0x1A = {:#06x}", read(channel, 0x1A));
|
||||
info!("0x28 = {:#06x}", read(channel, 0x28));
|
||||
info!("0x4E = {:#06x}", read(channel, 0x4E));
|
||||
info!("0x4F = {:#06x}", read(channel, 0x4F));
|
||||
} else {
|
||||
// Based on "DRP State Machine" from XAPP888
|
||||
// hold reset HIGH during pll config
|
||||
reset(channel, true);
|
||||
write(channel, 0x08, settings.clkout0_reg1);
|
||||
write(channel, 0x09, settings.clkout0_reg2);
|
||||
write(channel, 0x14, settings.clkfbout_reg1);
|
||||
write(channel, 0x15, settings.clkfbout_reg2);
|
||||
write(channel, 0x16, settings.div_reg);
|
||||
write(channel, 0x18, settings.lock_reg1);
|
||||
write(channel, 0x19, settings.lock_reg2);
|
||||
write(channel, 0x1A, settings.lock_reg3);
|
||||
write(channel, 0x28, settings.power_reg);
|
||||
write(channel, 0x4E, settings.filt_reg1);
|
||||
write(channel, 0x4F, settings.filt_reg2);
|
||||
reset(channel, false);
|
||||
|
||||
info!("waiting for PLL of txusrclk to lock...");
|
||||
while unsafe { (CXP[channel].downconn_txpll_locked_read)() == 0 } {}
|
||||
info!("txusrclk locked :D");
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
pub fn get_txusrclk_config(speed: CXP_SPEED) -> PLLSetting {
|
||||
match speed {
|
||||
CXP_SPEED::CXP_1 => {
|
||||
// CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 32
|
||||
// TXUSRCLK=62.5MHz
|
||||
PLLSetting {
|
||||
clkout0_reg1: 0x1410, //0x08
|
||||
clkout0_reg2: 0x0000, //0x09
|
||||
clkfbout_reg1: 0x1104, //0x14
|
||||
clkfbout_reg2: 0x0000, //0x15
|
||||
div_reg: 0x1041, //0x16
|
||||
lock_reg1: 0x03e8, //0x18
|
||||
lock_reg2: 0x5801, //0x19
|
||||
lock_reg3: 0xdbe9, //0x1A
|
||||
power_reg: 0x0000, //0x28
|
||||
filt_reg1: 0x9808, //0x4E
|
||||
filt_reg2: 0x9100, //0x4F
|
||||
}
|
||||
}
|
||||
CXP_SPEED::CXP_2 => {
|
||||
// CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 16
|
||||
// TXUSRCLK=62.5MHz
|
||||
PLLSetting {
|
||||
clkout0_reg1: 0x1208, //0x08
|
||||
clkout0_reg2: 0x0000, //0x09
|
||||
clkfbout_reg1: 0x1104, //0x14
|
||||
clkfbout_reg2: 0x0000, //0x15
|
||||
div_reg: 0x1041, //0x16
|
||||
lock_reg1: 0x03e8, //0x18
|
||||
lock_reg2: 0x5801, //0x19
|
||||
lock_reg3: 0xdbe9, //0x1A
|
||||
power_reg: 0x0000, //0x28
|
||||
filt_reg1: 0x9808, //0x4E
|
||||
filt_reg2: 0x9100, //0x4F
|
||||
}
|
||||
}
|
||||
CXP_SPEED::CXP_3 => {
|
||||
// CLKFBOUT_MULT = 10, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 16
|
||||
// TXUSRCLK=78.125MHz
|
||||
PLLSetting {
|
||||
clkout0_reg1: 0x1208, //0x08
|
||||
clkout0_reg2: 0x0000, //0x09
|
||||
clkfbout_reg1: 0x1145, //0x14
|
||||
clkfbout_reg2: 0x0000, //0x15
|
||||
div_reg: 0x1041, //0x16
|
||||
lock_reg1: 0x03e8, //0x18
|
||||
lock_reg2: 0x7001, //0x19
|
||||
lock_reg3: 0xf3e9, //0x1A
|
||||
power_reg: 0x0000, //0x28
|
||||
filt_reg1: 0x9908, //0x4E
|
||||
filt_reg2: 0x1900, //0x4F
|
||||
}
|
||||
}
|
||||
CXP_SPEED::CXP_5 => {
|
||||
// CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 8
|
||||
// TXUSRCLK=125MHz
|
||||
PLLSetting {
|
||||
clkout0_reg1: 0x1104, //0x08
|
||||
clkout0_reg2: 0x0000, //0x09
|
||||
clkfbout_reg1: 0x1104, //0x14
|
||||
clkfbout_reg2: 0x0000, //0x15
|
||||
div_reg: 0x1041, //0x16
|
||||
lock_reg1: 0x03e8, //0x18
|
||||
lock_reg2: 0x5801, //0x19
|
||||
lock_reg3: 0xdbe9, //0x1A
|
||||
power_reg: 0x0000, //0x28
|
||||
filt_reg1: 0x9808, //0x4E
|
||||
filt_reg2: 0x9100, //0x4F
|
||||
}
|
||||
}
|
||||
CXP_SPEED::CXP_6 => {
|
||||
// CLKFBOUT_MULT = 10, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 8
|
||||
// TXUSRCLK=156.25MHz
|
||||
PLLSetting {
|
||||
clkout0_reg1: 0x1104, //0x08
|
||||
clkout0_reg2: 0x0000, //0x09
|
||||
clkfbout_reg1: 0x1145, //0x14
|
||||
clkfbout_reg2: 0x0000, //0x15
|
||||
div_reg: 0x1041, //0x16
|
||||
lock_reg1: 0x03e8, //0x18
|
||||
lock_reg2: 0x7001, //0x19
|
||||
lock_reg3: 0xf3e9, //0x1A
|
||||
power_reg: 0x0000, //0x28
|
||||
filt_reg1: 0x9908, //0x4E
|
||||
filt_reg2: 0x1900, //0x4F
|
||||
}
|
||||
}
|
||||
CXP_SPEED::CXP_10 => {
|
||||
// CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 4
|
||||
// TXUSRCLK=250MHz
|
||||
PLLSetting {
|
||||
clkout0_reg1: 0x1082, //0x08
|
||||
clkout0_reg2: 0x0000, //0x09
|
||||
clkfbout_reg1: 0x1104, //0x14
|
||||
clkfbout_reg2: 0x0000, //0x15
|
||||
div_reg: 0x1041, //0x16
|
||||
lock_reg1: 0x03e8, //0x18
|
||||
lock_reg2: 0x5801, //0x19
|
||||
lock_reg3: 0xdbe9, //0x1A
|
||||
power_reg: 0x0000, //0x28
|
||||
filt_reg1: 0x9808, //0x4E
|
||||
filt_reg2: 0x9100, //0x4F
|
||||
}
|
||||
}
|
||||
CXP_SPEED::CXP_12 => {
|
||||
// CLKFBOUT_MULT = 10, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 4
|
||||
// TXUSRCLK=312.5MHz
|
||||
PLLSetting {
|
||||
clkout0_reg1: 0x1082, //0x08
|
||||
clkout0_reg2: 0x0000, //0x09
|
||||
clkfbout_reg1: 0x1145, //0x14
|
||||
clkfbout_reg2: 0x0000, //0x15
|
||||
div_reg: 0x1041, //0x16
|
||||
lock_reg1: 0x03e8, //0x18
|
||||
lock_reg2: 0x7001, //0x19
|
||||
lock_reg3: 0xf3e9, //0x1A
|
||||
power_reg: 0x0000, //0x28
|
||||
filt_reg1: 0x9908, //0x4E
|
||||
filt_reg2: 0x1900, //0x4F
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
Loading…
Reference in New Issue