forked from M-Labs/artiq-zynq
cxp downconn: use auto aligner
cxp downconn: fix autoaligner checking
This commit is contained in:
parent
0e69c5d5ba
commit
1f8ef6bf96
|
|
@ -8,8 +8,8 @@ from misoc.interconnect.csr import *
|
||||||
|
|
||||||
from artiq.gateware.drtio.transceiver.gtx_7series_init import *
|
from artiq.gateware.drtio.transceiver.gtx_7series_init import *
|
||||||
|
|
||||||
from operator import add
|
|
||||||
from functools import reduce
|
from functools import reduce
|
||||||
|
from operator import add
|
||||||
|
|
||||||
class CXP_DownConn(Module, AutoCSR):
|
class CXP_DownConn(Module, AutoCSR):
|
||||||
def __init__(self, refclk, pads, sys_clk_freq, debug_sma, pmod_pads):
|
def __init__(self, refclk, pads, sys_clk_freq, debug_sma, pmod_pads):
|
||||||
|
|
@ -101,13 +101,12 @@ class CXP_DownConn(Module, AutoCSR):
|
||||||
Instance("OBUF", i_I=gtx.cd_cxp_gtx_tx.clk, o_O=debug_sma.n_rx),
|
Instance("OBUF", i_I=gtx.cd_cxp_gtx_tx.clk, o_O=debug_sma.n_rx),
|
||||||
|
|
||||||
# pmod 0-7 pin
|
# pmod 0-7 pin
|
||||||
Instance("OBUF", i_I=gtx.clk_aligner.rxslide, o_O=pmod_pads[0]),
|
Instance("OBUF", i_I=gtx.comma_det.aligner_en_rxclk, o_O=pmod_pads[0]),
|
||||||
Instance("OBUF", i_I=gtx.clk_aligner.rxinit_done, o_O=pmod_pads[1]),
|
Instance("OBUF", i_I=gtx.comma_det.rxinit_done, o_O=pmod_pads[1]),
|
||||||
Instance("OBUF", i_I=gtx.clk_aligner.restart, o_O=pmod_pads[2]),
|
Instance("OBUF", i_I=gtx.comma_det.restart, o_O=pmod_pads[2]),
|
||||||
Instance("OBUF", i_I=gtx.clk_aligner.comma_aligned, o_O=pmod_pads[3]),
|
Instance("OBUF", i_I=gtx.comma_det.comma_aligned, o_O=pmod_pads[3]),
|
||||||
Instance("OBUF", i_I=gtx.clk_aligner.ready, o_O=pmod_pads[4]),
|
Instance("OBUF", i_I=gtx.comma_det.ready, o_O=pmod_pads[4]),
|
||||||
Instance("OBUF", i_I=gtx.clk_aligner.comma_det_reset, o_O=pmod_pads[5]),
|
Instance("OBUF", i_I=gtx.comma_det.valid_data, o_O=pmod_pads[5]),
|
||||||
# Instance("OBUF", i_I=gtx.clk_aligner.comma_det.detected, o_O=pmod_pads[6]),
|
|
||||||
# Instance("OBUF", i_I=, o_O=pmod_pads[7]),
|
# Instance("OBUF", i_I=, o_O=pmod_pads[7]),
|
||||||
]
|
]
|
||||||
|
|
||||||
|
|
@ -260,157 +259,106 @@ class QPLL(Module):
|
||||||
)
|
)
|
||||||
]
|
]
|
||||||
|
|
||||||
# detect if the comma is located at data[0:10]
|
|
||||||
class Comma_Detector(Module):
|
|
||||||
def __init__(self, comma, width):
|
|
||||||
self.reset = Signal()
|
|
||||||
self.data = Signal(width)
|
|
||||||
|
|
||||||
self.detected = Signal()
|
|
||||||
self.bitshift = Signal(max=width)
|
|
||||||
self.comma_aligned = Signal()
|
|
||||||
|
|
||||||
# # #
|
|
||||||
last_data = Signal(10)
|
|
||||||
data = Signal(width+10)
|
|
||||||
|
|
||||||
comma_n = ~comma & 0b1111111111
|
|
||||||
self.sync += [
|
|
||||||
last_data.eq(self.data[:10]),
|
|
||||||
data.eq(Cat(self.data, last_data)),
|
|
||||||
If(self.reset,
|
|
||||||
self.bitshift.eq(0),
|
|
||||||
self.detected.eq(0),
|
|
||||||
),
|
|
||||||
|
|
||||||
If(self.reset,
|
|
||||||
self.comma_aligned.eq(0)
|
|
||||||
).Elif((self.data[:10] == comma) | (self.data[:10] == comma_n),
|
|
||||||
self.comma_aligned.eq(1)
|
|
||||||
),
|
|
||||||
]
|
|
||||||
|
|
||||||
for n in range(width):
|
|
||||||
self.sync += \
|
|
||||||
If((data[n:n+10] == comma) | (data[n:n+10] == comma_n),
|
|
||||||
self.bitshift.eq(width-n),
|
|
||||||
self.detected.eq(1),
|
|
||||||
)
|
|
||||||
|
|
||||||
# Warning: Xilinx transceivers are LSB first, and comma needs to be flipped
|
# Warning: Xilinx transceivers are LSB first, and comma needs to be flipped
|
||||||
# compared to the usual 8b10b binary representation.
|
class Comma_Detector(Module):
|
||||||
# 50000 62.5MHz locks | 125MHz takes a lot time to locks | 250MHz many commas
|
def __init__(self, comma, check_period=50_000, width=20):
|
||||||
# 30000 62.5MHz & 125MHz locks | 250MHz more commas but not lock
|
|
||||||
# 30000 62.5MHz & 125MHz locks | 250MHz nothing to see
|
|
||||||
# 27000 62.5MHz & 125MHz locks | 250MHz nothing to see
|
|
||||||
# 25000 62.5MHz takes long time to lock | 125MHz no lock | 250MHz locks
|
|
||||||
# 24700 62.5MHz lock | 125MHz sometimes locks | 250MHz locks
|
|
||||||
# 20000 250MHz nothing to see
|
|
||||||
# 10000 62.5MHz & 125MHz nothing to see | 250MHz many commas not much can survive the second check
|
|
||||||
class Manual_Aligner(Module):
|
|
||||||
def __init__(self, comma, check_period=24_700, width=20):
|
|
||||||
self.rxslide = Signal()
|
|
||||||
self.data = Signal(width)
|
self.data = Signal(width)
|
||||||
self.rxinit_done = Signal()
|
self.rxinit_done = Signal()
|
||||||
|
|
||||||
|
self.aligner_en_rxclk = Signal()
|
||||||
self.ready = Signal()
|
self.ready = Signal()
|
||||||
self.restart = Signal()
|
self.restart = Signal()
|
||||||
|
|
||||||
# # #
|
# # #
|
||||||
|
|
||||||
|
|
||||||
timerout_period = 5_000_000
|
|
||||||
timerout = Signal(reset=timerout_period-1, max=timerout_period)
|
|
||||||
|
|
||||||
ready_rxclk = Signal()
|
|
||||||
self.specials += MultiReg(ready_rxclk, self.ready)
|
|
||||||
self.ready.attr.add("no_retiming")
|
|
||||||
|
|
||||||
|
|
||||||
restart_sys = Signal()
|
|
||||||
restart_rxclk = Signal()
|
|
||||||
self.specials += MultiReg(restart_rxclk, restart_sys)
|
|
||||||
restart_sys.attr.add("no_retiming")
|
|
||||||
|
|
||||||
# NOTE: be careful of all the timeout values!!! It should be much larger than the longest fsm
|
|
||||||
# TODO: fix comma fall too fast for 500MHz (10Gpbs) -> need to change CDR_CFG via DRP
|
|
||||||
# Restart rx periodically since rx need to be restart when connecting RXN/RXP
|
|
||||||
self.sync += [
|
|
||||||
self.restart.eq(0),
|
|
||||||
If(restart_sys,
|
|
||||||
timerout.eq(timerout.reset),
|
|
||||||
self.restart.eq(1),
|
|
||||||
).Elif(~self.ready,
|
|
||||||
If((timerout == 0),
|
|
||||||
timerout.eq(timerout.reset),
|
|
||||||
self.restart.eq(1),
|
|
||||||
).Else(
|
|
||||||
timerout.eq(timerout - 1),
|
|
||||||
)
|
|
||||||
)
|
|
||||||
]
|
|
||||||
|
|
||||||
self.comma_det_reset = Signal()
|
|
||||||
self.comma_aligned = Signal()
|
self.comma_aligned = Signal()
|
||||||
|
self.valid_data = Signal()
|
||||||
|
|
||||||
|
self.submodules.recheck_ps = recheck_ps = PulseSynchronizer("sys", "cxp_gtx_rx")
|
||||||
|
|
||||||
|
aligned = Signal()
|
||||||
|
self.specials += MultiReg(self.comma_aligned, aligned)
|
||||||
|
|
||||||
|
valid_data = Signal()
|
||||||
|
self.specials += MultiReg(self.valid_data, valid_data)
|
||||||
|
|
||||||
comma_n = ~comma & 0b1111111111
|
comma_n = ~comma & 0b1111111111
|
||||||
|
|
||||||
|
rx1cnt = Signal(max=11)
|
||||||
self.sync.cxp_gtx_rx += [
|
self.sync.cxp_gtx_rx += [
|
||||||
If(self.comma_det_reset,
|
rx1cnt.eq(reduce(add, [self.data[i] for i in range(10)])),
|
||||||
|
If(recheck_ps.o,
|
||||||
self.comma_aligned.eq(0)
|
self.comma_aligned.eq(0)
|
||||||
).Elif((self.data[:10] == comma) | (self.data[:10] == comma_n),
|
).Elif((self.data[:10] == comma) | (self.data[:10] == comma_n),
|
||||||
self.comma_aligned.eq(1)
|
self.comma_aligned.eq(1)
|
||||||
),
|
),
|
||||||
|
|
||||||
|
If(recheck_ps.o,
|
||||||
|
self.valid_data.eq(0)
|
||||||
|
).Elif((rx1cnt == 4) | (rx1cnt == 5) | (rx1cnt == 6),
|
||||||
|
self.valid_data.eq(1)
|
||||||
|
),
|
||||||
]
|
]
|
||||||
|
|
||||||
self.submodules.fsm = fsm = ClockDomainsRenamer("cxp_gtx_rx")(FSM(reset_state="IDLE"))
|
|
||||||
|
check_counter = Signal(reset=check_period-1, max=check_period)
|
||||||
|
check = Signal()
|
||||||
|
|
||||||
|
aligner_en_sys = Signal()
|
||||||
|
self.specials += MultiReg(aligner_en_sys, self.aligner_en_rxclk, odomain="cxp_gtx_rx")
|
||||||
|
|
||||||
|
self.sync += [
|
||||||
|
check.eq(0),
|
||||||
|
If(check_counter == 0,
|
||||||
|
check_counter.eq(check_counter.reset),
|
||||||
|
check.eq(1),
|
||||||
|
).Else(
|
||||||
|
check_counter.eq(check_counter - 1),
|
||||||
|
)
|
||||||
|
]
|
||||||
|
|
||||||
|
|
||||||
rxinit_done_rxclk = Signal()
|
self.submodules.fsm = fsm = FSM(reset_state="IDLE")
|
||||||
self.specials += MultiReg(self.rxinit_done, rxinit_done_rxclk, odomain="cxp_gtx_rx")
|
|
||||||
|
|
||||||
check_timer = Signal(reset=check_period-1,max=check_period)
|
|
||||||
|
|
||||||
fsm.act("IDLE",
|
fsm.act("IDLE",
|
||||||
self.comma_det_reset.eq(1),
|
aligner_en_sys.eq(1),
|
||||||
If(rxinit_done_rxclk,
|
If(check,
|
||||||
NextValue(check_timer, check_timer.reset),
|
recheck_ps.i.eq(1),
|
||||||
NextState("WAIT_COMMA_DET"),
|
If(aligned,
|
||||||
),
|
NextState("WAIT_NO_ERROR"),
|
||||||
|
).Else(
|
||||||
|
self.restart.eq(1),
|
||||||
|
)
|
||||||
|
)
|
||||||
)
|
)
|
||||||
|
|
||||||
fsm.act("WAIT_COMMA_DET",
|
fsm.act("WAIT_NO_ERROR",
|
||||||
NextValue(check_timer, check_timer - 1),
|
aligner_en_sys.eq(1),
|
||||||
If(check_timer == 0,
|
If(check,
|
||||||
restart_rxclk.eq(1),
|
recheck_ps.i.eq(1),
|
||||||
NextState("RESET"),
|
If(aligned & valid_data,
|
||||||
# restart_ps.i.eq(1),
|
NextState("READY"),
|
||||||
# NextState("IDLE"),
|
).Else(
|
||||||
).Elif(self.comma_aligned,
|
self.restart.eq(1),
|
||||||
NextValue(check_timer, check_timer.reset),
|
NextState("IDLE"),
|
||||||
self.comma_det_reset.eq(1),
|
)
|
||||||
NextState("READY")
|
|
||||||
)
|
)
|
||||||
)
|
)
|
||||||
|
|
||||||
fsm.act("READY",
|
fsm.act("READY",
|
||||||
ready_rxclk.eq(1),
|
self.ready.eq(1),
|
||||||
If(check_timer == 0,
|
If(check,
|
||||||
NextValue(check_timer, check_timer.reset),
|
recheck_ps.i.eq(1),
|
||||||
self.comma_det_reset.eq(1),
|
If(~(aligned & valid_data),
|
||||||
If(~self.comma_aligned,
|
self.restart.eq(1),
|
||||||
restart_rxclk.eq(1),
|
NextState("IDLE"),
|
||||||
NextState("RESET"),
|
|
||||||
# restart_ps.i.eq(1),
|
|
||||||
# NextState("IDLE"),
|
|
||||||
)
|
)
|
||||||
).Else(
|
|
||||||
NextValue(check_timer, check_timer - 1),
|
|
||||||
)
|
)
|
||||||
)
|
)
|
||||||
|
|
||||||
fsm.act("RESET",
|
|
||||||
restart_rxclk.eq(1),
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
class GTX(Module):
|
class GTX(Module):
|
||||||
|
|
@ -466,7 +414,7 @@ class GTX(Module):
|
||||||
txdata = Signal(20)
|
txdata = Signal(20)
|
||||||
rxdata = Signal(20)
|
rxdata = Signal(20)
|
||||||
|
|
||||||
rxslide = Signal()
|
comma_align_en = Signal()
|
||||||
# Note: the following parameters were set after consulting AR45360
|
# Note: the following parameters were set after consulting AR45360
|
||||||
self.specials += \
|
self.specials += \
|
||||||
Instance("GTXE2_CHANNEL",
|
Instance("GTXE2_CHANNEL",
|
||||||
|
|
@ -558,7 +506,7 @@ class GTX(Module):
|
||||||
i_RXDFEXYDEN=1,
|
i_RXDFEXYDEN=1,
|
||||||
i_RXDFEXYDHOLD=0,
|
i_RXDFEXYDHOLD=0,
|
||||||
i_RXDFEXYDOVRDEN=0,
|
i_RXDFEXYDOVRDEN=0,
|
||||||
i_RXLPMEN=1, # RXLPMEN = 1: LPM mode is enabled for non scramble data
|
i_RXLPMEN=0, # RXLPMEN = 0: DFE mode is enabled for non scramble data
|
||||||
p_RX_DFE_GAIN_CFG=0x0207EA,
|
p_RX_DFE_GAIN_CFG=0x0207EA,
|
||||||
p_RX_DFE_VP_CFG=0b00011111100000011,
|
p_RX_DFE_VP_CFG=0b00011111100000011,
|
||||||
p_RX_DFE_UT_CFG=0b10001000000000000,
|
p_RX_DFE_UT_CFG=0b10001000000000000,
|
||||||
|
|
@ -597,18 +545,17 @@ class GTX(Module):
|
||||||
p_ALIGN_COMMA_DOUBLE="FALSE",
|
p_ALIGN_COMMA_DOUBLE="FALSE",
|
||||||
p_ALIGN_COMMA_ENABLE=0b1111111111,
|
p_ALIGN_COMMA_ENABLE=0b1111111111,
|
||||||
p_ALIGN_COMMA_WORD=2, # allow rxslide to shift 20 times
|
p_ALIGN_COMMA_WORD=2, # allow rxslide to shift 20 times
|
||||||
p_ALIGN_MCOMMA_DET="FALSE",
|
p_ALIGN_MCOMMA_DET="TRUE",
|
||||||
p_ALIGN_MCOMMA_VALUE=0b1010000011,
|
p_ALIGN_MCOMMA_VALUE=0b1010000011,
|
||||||
p_ALIGN_PCOMMA_DET="FALSE",
|
p_ALIGN_PCOMMA_DET="TRUE",
|
||||||
p_ALIGN_PCOMMA_VALUE=0b0101111100,
|
p_ALIGN_PCOMMA_VALUE=0b0101111100,
|
||||||
p_SHOW_REALIGN_COMMA="FALSE",
|
p_SHOW_REALIGN_COMMA="FALSE",
|
||||||
p_RXSLIDE_AUTO_WAIT=7,
|
p_RXSLIDE_AUTO_WAIT=7,
|
||||||
p_RXSLIDE_MODE="PCS",
|
p_RXSLIDE_MODE="OFF",
|
||||||
p_RX_SIG_VALID_DLY=10,
|
p_RX_SIG_VALID_DLY=10,
|
||||||
i_RXPCOMMAALIGNEN=0,
|
i_RXPCOMMAALIGNEN=comma_align_en,
|
||||||
i_RXMCOMMAALIGNEN=0,
|
i_RXMCOMMAALIGNEN=comma_align_en,
|
||||||
i_RXCOMMADETEN=0, # enable manual word alignment
|
i_RXCOMMADETEN=1, # enable auto word alignment
|
||||||
i_RXSLIDE=rxslide,
|
|
||||||
|
|
||||||
# RX 8B/10B Decoder Attributes
|
# RX 8B/10B Decoder Attributes
|
||||||
p_RX_DISPERR_SEQ_MATCH="FALSE",
|
p_RX_DISPERR_SEQ_MATCH="FALSE",
|
||||||
|
|
@ -735,13 +682,13 @@ class GTX(Module):
|
||||||
]
|
]
|
||||||
|
|
||||||
|
|
||||||
self.submodules.clk_aligner = clk_aligner = Manual_Aligner(0b0101111100)
|
self.submodules.comma_det = comma_det = Comma_Detector(0b0101111100)
|
||||||
self.comb += [
|
self.comb += [
|
||||||
clk_aligner.data.eq(rxdata),
|
comma_det.data.eq(rxdata),
|
||||||
clk_aligner.rxinit_done.eq(rx_init.done),
|
comma_det.rxinit_done.eq(rx_init.done),
|
||||||
rxslide.eq(clk_aligner.rxslide),
|
comma_align_en.eq(comma_det.aligner_en_rxclk),
|
||||||
self.rx_ready.eq(clk_aligner.ready),
|
self.rx_ready.eq(comma_det.ready),
|
||||||
|
|
||||||
rx_init.restart.eq(self.rx_restart | clk_aligner.restart),
|
rx_init.restart.eq(self.rx_restart | comma_det.restart),
|
||||||
tx_init.restart.eq(self.tx_restart),
|
tx_init.restart.eq(self.tx_restart),
|
||||||
]
|
]
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue