linuswck
/
thermostat
forked from M-Labs/thermostat
1
0
Fork 0
Code Pull Requests 1 Activity

README: minor corrections

This commit is contained in:
Sebastien Bourdeauducq 2022-01-05 08:22:43 +08:00
parent 09082b24a5
commit 1c00e732fa
1 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
README.md
View File

@ -98,12 +98,12 @@ formatted as line-delimited JSON.
| `report mode` | Show current report mode | | `report mode` | Show current report mode |
| `report mode <off/on>` | Set report mode | | `report mode <off/on>` | Set report mode |
| `pwm` | Show current PWM settings | | `pwm` | Show current PWM settings |
| `pwm <0/1> max_i_pos <amp>` | Set PWM duty cycle for **max_i_pos** to *ampere* | | `pwm <0/1> max_i_pos <amp>` | Set maximum positive output current |
| `pwm <0/1> max_i_neg <amp>` | Set PWM duty cycle for **max_i_neg** to *- ampere* | | `pwm <0/1> max_i_neg <amp>` | Set maximum negative output current |
| `pwm <0/1> max_v <volts>` | Set PWM duty cycle for **max_v** to *volt* | | `pwm <0/1> max_v <volt>` | Set maximum output voltage |
| `pwm <0/1> i_set <amp>` | Disengage PID, set **i_set** DAC to *ampere* | | `pwm <0/1> i_set <amp>` | Disengage PID, set fixed output current |
| `pwm <0/1> pid` | Set PWM to be controlled by PID | | `pwm <0/1> pid` | Let output current to be controlled by the PID |
| `center <0/1> <volts>` | Set the MAX1968 0A-centerpoint to *volts* | | `center <0/1> <volt>` | Set the MAX1968 0A-centerpoint to the specified fixed voltage |
| `center <0/1> vref` | Set the MAX1968 0A-centerpoint to measure from VREF | | `center <0/1> vref` | Set the MAX1968 0A-centerpoint to measure from VREF |
| `pid` | Show PID configuration | | `pid` | Show PID configuration |
| `pid <0/1> target <deg_celsius>` | Set the PID controller target temperature | | `pid <0/1> target <deg_celsius>` | Set the PID controller target temperature |
@ -122,7 +122,7 @@ formatted as line-delimited JSON.
| `load [0/1]` | Restore configuration for channel all/0/1 from flash | | `load [0/1]` | Restore configuration for channel all/0/1 from flash |
| `save [0/1]` | Save configuration for channel all/0/1 to flash | | `save [0/1]` | Save configuration for channel all/0/1 to flash |
| `reset` | Reset the device | | `reset` | Reset the device |
| `dfu` | Reset device and enters USB device firmware update (DFU) mode | | `dfu` | Reset device and enters USB device firmware update (DFU) mode |
| `ipv4 <X.X.X.X/L> [Y.Y.Y.Y]` | Configure IPv4 address, netmask length, and optional default gateway | | `ipv4 <X.X.X.X/L> [Y.Y.Y.Y]` | Configure IPv4 address, netmask length, and optional default gateway |