1
0
Fork 0

Add easier access to the urukuls switches

Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
Egor Savkin 2023-06-28 10:20:35 +08:00
parent cf840f083a
commit 489b5cea8f
2 changed files with 13 additions and 1 deletions

View File

@ -16,9 +16,21 @@ With enabled SUServo mode, you only need to add `suservo` to JSON file, with its
## Setup ## Setup
On bottoms of each Urukul, switch first pins 1 and 2 to `ON`, as on the picture: To enable, on bottoms of each Urukul, switch first switches 1 and 2 to `ON`, as on the picture:
![](../img/urukul_pins_suservo.jpeg) ![](../img/urukul_pins_suservo.jpeg)
### Easier access to the switches (for big racks)
When the crate is assembled, it may be difficult to pull out the cards to access the switches.
Hence for big racks it may be easier to remove the upper perforated panel. For this:
1. Unscrew from both sides:
![rack_urukul_switch_access.jpg](../img/rack_urukul_switch_access.jpg)
2. Remove empty front panels
3. Gently push out the perforated panel, applying the force from rack's back and front
4. With tweezers and following the [basic operating hints](../build_test_firmware.md#operating-hints-and-warnings)
switch the switches in desired direction
5. Install the perforated and front panels back, screw the screws
## Testing ## Testing
After running `artiq_sinara_test`: After running `artiq_sinara_test`:

Binary file not shown.

After

Width:  |  Height:  |  Size: 68 KiB