c02181c80c
laser diode: Add Analog Watchdog initial commit
...
- rm pid_state for laser diode
2024-01-24 12:18:42 +08:00
095fe8ea69
AD7172: Rm deprecated warning for Rev0_2 hw bug
2024-01-24 12:18:42 +08:00
a0b67cdb09
MAX1968: Patch DacVfb pinout for rev0_3
2024-01-24 12:18:42 +08:00
381f25f036
AD7172: correct wrong NSS pinout definition
2024-01-24 12:18:42 +08:00
c768bdc93a
Thermostat: Add fn to calibrate ADC's VDDA
...
- ADC1 exclusive feature
- Calibrated VDDA val can be passed to other ADCs to adjust gain error
2024-01-24 12:18:42 +08:00
0d12c902fc
pd_mon: Separate ld_power calculation to a file
2024-01-24 12:18:37 +08:00
3cfdee917a
rename current_source -> ld_ctrl
2024-01-24 12:16:06 +08:00
5f582be143
rename ld_drive to laser_diode
2024-01-24 12:16:06 +08:00
2f7ca2a706
Thermostat: Add fns to report status & settings
...
- Report all system status, PID Settings, NTC parameter, TEC Settings
2024-01-24 12:16:06 +08:00
ff3d9b790a
thermostat: pid_state rename variables
2024-01-24 12:16:06 +08:00
bc7bf9a6e7
rename channel_state -> pid_state
2024-01-24 12:16:02 +08:00
ca110962f7
Thermostat: Add pid_ctrl parms & its related fns
...
- setup: include the pid_ctrl
- poll_adc: Fetch Temperature and Update PID to set the current output
2024-01-24 12:16:02 +08:00
d0f226ce03
Thermostat: Add default to ChannelState
2024-01-24 12:16:02 +08:00
f49fd08c69
ad7172: impl default for ch_calibration
2024-01-24 12:16:02 +08:00
ccaf728c75
thermostat: Add channel_state mod for PID Control
2024-01-24 12:15:57 +08:00
3ac287ace2
steinhart_hart: Add Steinhart-Hart eq fns
...
- Port from thermostat firmware
2024-01-17 12:20:34 +08:00
cdf900a5b6
gpio: Add AD7172 phy gpio init
...
- Will not function on rev0_2 kirdy due to wrong hardware connection
2024-01-16 17:36:16 +08:00
af8d361b95
AD7172: Add AD7172 drivers fns
...
- Port from Thermostat Firmware
2024-01-16 16:19:01 +08:00
e355e83d28
memory.x: Add comment on the reserved flash sector
2024-01-16 15:27:43 +08:00
285fc9b5d6
memory.x: Reserved Flash Sector 11 for Config
2024-01-15 17:44:44 +08:00
8c612fc0c9
memory.x: RM CONFIG MEMORY area in linker script
...
- STM32f407 does not have second bank or flash/ Sector 12 unlike F427
2024-01-15 17:43:17 +08:00
42cd55645c
main: Add demo fns to use on-board flash
2024-01-15 17:21:48 +08:00
d190b8b192
flash: Add init boot seq
...
- Max flash erase time for PSize = 8 and 128KiB Sector is 4s
- Watchdog period is changed accordingly
2024-01-15 17:21:06 +08:00
74325a3cee
flash: Add fns to store data in flash
...
- Writing to the wrong flash sector can cause MCU to stall
- Only 16KiB out of 128KiB in the sector is used to save RAM for compacting
2024-01-15 17:14:58 +08:00
709eae8566
max5719: Slow down SPI clock
...
- setting it to 30MHz hang MCU core
2024-01-11 17:46:35 +08:00
d3e3451d37
Add README.md for flashing instructions
2024-01-11 17:17:38 +08:00
33ff0c3678
main: Add demo fns reading all hardware status
2024-01-11 17:17:38 +08:00
33d9cb45c4
ld_drive: Add soft current limit
2024-01-11 17:17:38 +08:00
8ae27725c6
Port PID Controller from thermostat firmware
...
- Add serde Cargo
2024-01-11 17:17:10 +08:00
20fc6d6fac
rm photodiode folder and its mod.rs
...
- photodiode related fns are written inside laser diode folder
- as they are closely related
2024-01-10 17:51:27 +08:00
654964831a
boot: Change thermostat boot seq for new setup seq
...
- Power Up -> Calibrate -> Set the TEC current to some value
2024-01-10 10:38:05 +08:00
27c7b5929e
thermostat: change setup seq
...
- default power off
- with all params set to default val on hw
- rm calibration from setup
2024-01-10 10:38:05 +08:00
e48f1979f0
Clean up warnings
2024-01-10 10:38:05 +08:00
59f2385ecf
ld_drive: make settings private & add set & get fn
2024-01-10 10:38:05 +08:00
d4e074cbd4
ld_drive: rebase to the point that declare set_i
2024-01-10 10:38:05 +08:00
277796d2a4
boot: Add ld_drive boot sequence
2024-01-10 10:38:05 +08:00
be8bf0a8b6
ld_drive: add setup fn
2024-01-10 10:38:05 +08:00
b1123047c7
ld_drive: Add fns to get pd current & cal ld pwr
2024-01-10 10:38:05 +08:00
707fac0775
ld_drive: add a param for setting to cal pd pwr
...
- Conversion ratio between pd current and ld output power
2024-01-10 10:38:05 +08:00
a99dde8b38
current_source: add driver to read pd voltage
2024-01-10 10:38:05 +08:00
d1f7a20c15
ld_drive: Add fns to set ld output current
2024-01-10 10:38:05 +08:00
58a8b15c40
ld_drive: add unit type and hw related constant
2024-01-10 10:38:05 +08:00
590ba8171c
Add high level ld_drive mod
...
- Use current_source driver to interface with the board
2024-01-10 10:38:05 +08:00
0807f66b3c
Add digital gpio related fns to Current source
...
- power_up
- power_down
- ld_short_enable
- ld_short_disable
- Rev0_2 has hardware connection bug for LD_EN net.
- laser driver power will always be enabled
2024-01-10 10:38:05 +08:00
2953d4edde
Rewrite current_source obj and add gpio init
2024-01-10 10:38:05 +08:00
f2c026ffdd
Rewrite MAX5719 Driver into a separated file
2024-01-10 10:38:05 +08:00
c7d36bc8d5
Reorganize variables and fns structure
2024-01-10 10:38:00 +08:00
784fc03957
cargo: add miniconf
2024-01-10 10:36:13 +08:00
6cc2bc32c5
thermostat:reorganize fns structure, add setup seq
2024-01-10 10:36:09 +08:00
23ee568ea7
Port TEC DAC calibration procedure from Thermostat
...
- Needs clean up
- To be evaluated and rethink the calibration procedure
2024-01-10 10:36:05 +08:00
