293 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
linuswck	574abc2c2f	Add instructions to erase flash settings with DFU	2024-03-12 11:26:45 +08:00
linuswck	a9dbff8250	Send Response Back to The Client after Recv Cmd	2024-03-08 16:38:52 +08:00
linuswck	8cd3f70721	Add Instructions for Erasing Flash Settings	2024-03-07 16:20:51 +08:00
linuswck	b7231f48ff	Fix Recv Dfu cmd doesn't hard reset bug	2024-03-07 10:26:32 +08:00
linuswck	7f6a385e1d	Support controls from multiple TCP Socket Clients	2024-03-06 16:30:31 +08:00
linuswck	eff8adc184	Update Eth Link Speed with the detected Speed ... - adds support to Half/FullDuplexBase10T, HalfDuplexBase100Tx Eth Speed - fix a bug which Kirdy requires link to up to enter main loop	2024-03-06 12:15:08 +08:00
linuswck	a579e5c5d5	Add default gateway into IpSettings	2024-03-06 10:34:57 +08:00
linuswck	65b757ac3c	Add cmd to Store IP Settings in Flash ... - Cmds Setup Flow: Set IP -> Save Settings to Flash -> Issue HardRst	2024-03-05 16:44:28 +08:00
linuswck	911d9a7bc9	Load & Config IP Settings from Flash at StartUp	2024-03-05 16:44:03 +08:00
linuswck	111d9a4226	cleanup	2024-03-05 16:33:49 +08:00
linuswck	a3885c365e	Implement Save & Load Flash Settings in FSM & cmd	2024-03-05 16:33:45 +08:00
linuswck	a58b0954ec	Add Set Default PWR On cmd for ld & tec	2024-03-05 10:35:05 +08:00
linuswck	92c6cf12d4	Add fns to apply ld, tec settings summary configs	2024-03-05 10:35:05 +08:00
linuswck	ef2410f441	Add fns, struct items for getting ld, tec settings	2024-03-05 10:35:05 +08:00
linuswck	adfa4f5fa3	Move TempAdcFilter struct def to Thermostat	2024-03-05 10:35:05 +08:00
linuswck	df939eb9a3	Use FSM to manage device state in main loop	2024-03-05 10:35:01 +08:00
linuswck	3aca712e1d	Fix typos	2024-03-04 10:32:33 +08:00
linuswck	4526536a48	Ignore packets of 0 bytes size	2024-03-01 11:31:06 +08:00
linuswck	f488786e1c	Use DMA to read Tec_I & Tec_V ... - Remove the single conversion polling time with DMA	2024-03-01 11:31:01 +08:00
linuswck	3528d8a68f	Update Python Test Scripts	2024-02-28 13:33:51 +08:00
linuswck	46393bacdb	Add comments on TCP client development	2024-02-28 13:00:02 +08:00
linuswck	6fc800e562	net: Set stm32 link speed with the Phy Speed read	2024-02-28 13:00:02 +08:00
linuswck	76477065be	Change f64 to f32 for SI Unit related computation ... - Save computational time - Improve the processing speed of TecSetI cmd	2024-02-28 12:59:58 +08:00
linuswck	b1fa0e51c8	Add a separate tec_set_i cmd to reduce overhead ... - miniconf is slow at validating complex struct with large enum lists	2024-02-28 12:46:21 +08:00
linuswck	9f82fa58f4	cmd: Add temp adc filter config cmd	2024-02-28 12:23:09 +08:00
linuswck	19341672a9	Correct SPI Clock Freq and Set them to Max ... - Set the SPI frequency to maximum to reduce data transaction time - SPI1 SCLK is divided from PCLK2 - SPI2, SPI2 SCLK are divided from PCLK1	2024-02-28 12:23:09 +08:00
linuswck	86a9fb039e	boot: Correct PCLK1, PCLK2 freq value ... - PCLK is divided from HCLK in power of two - abs max pclk1 = 42MHz - abs max pclk2 = 84MHz	2024-02-28 12:23:09 +08:00
linuswck	a2bb390ae2	ad7172: Add filter configs for single channel mode	2024-02-28 12:23:09 +08:00
linuswck	18dd0a7963	Save Thermostat and Laser Diode PWR On/Off status	2024-02-28 12:22:40 +08:00
linuswck	d1cc677668	thermostat: split poll_adc & update_pid into 2 fns	2024-02-28 12:21:37 +08:00
linuswck	c09ccc29cd	cmd: Add cmd to get all device settings	2024-02-23 12:45:29 +08:00
linuswck	c4135f6ac3	cmd: Add cmds to config pd_mon params	2024-02-22 16:44:45 +08:00
linuswck	6ee45b4814	thermostat: Limit Pid Temp SetPt to TempMon limits	2024-02-21 17:37:56 +08:00
linuswck	a8787430b1	Add Temperature Monitor to Thermostat ... - Issue an alarm when temperature goes out of user-defined operating range during Pid Controller startup or reading is outside of +-0.5 Degree from temperature set point after Pid Controller becomes stable - If alarm is observed, power down laser and tec controller and disengage Pid Controller - Add the corresponding cmd for configuring the temperature monitor	2024-02-21 17:32:11 +08:00
linuswck	ed785b7c85	ld: correct timer and dac reset in pwr_up seq	2024-02-21 11:11:12 +08:00
linuswck	30ab228b4b	ld: Set default ld_current_limit in setup() fn	2024-02-20 16:22:13 +08:00
linuswck	88cca12a60	ld: Use Timer IRQ to ramp up/down output current ... - Fixes possible watchdog timeout - Improves ethernet response time & thermostat Pid update interval consistency	2024-02-20 16:18:06 +08:00
linuswck	8139ebdc1b	ld_ctrl: set_dac() fn now returns the volt set ... - before this fix, set_dac() just returns the inputted voltage	2024-02-20 12:30:00 +08:00
linuswck	5f83b73011	cmd: Add active report mode cmd	2024-02-19 15:08:00 +08:00
linuswck	0642640da7	dfu: Add eth cmd, fns to put stm32 into dfu mode	2024-02-16 17:23:47 +08:00
linuswck	6dd1bf9301	hw_rev: Generate random mac address on rev0_3	2024-02-16 17:23:39 +08:00
linuswck	d2efc02b6a	eth_cmd_test: Reset ld current to 0A during SIGINT	2024-02-15 12:47:29 +08:00
linuswck	89d415194d	update eth_cmd_test code	2024-02-15 12:14:14 +08:00
linuswck	09b3765877	pid_autotune: Add pid autotune script ... - Port from thermostat repo	2024-02-15 12:14:14 +08:00
linuswck	7a76325288	cmd: rm rev from cmd json ... - not in used	2024-02-15 12:14:14 +08:00
linuswck	ffa5f4e8ff	pid: Use Thermostat's PID algo instead of IDSP ... - Has lower steady state error upon testing with PID autotune	2024-02-15 12:14:14 +08:00
linuswck	e9a396f001	thermostat: Add abs timestamp to StatusReport	2024-02-15 12:14:14 +08:00
linuswck	412f5ec58b	cmd: add cmds to poll tec temp, dis/enable pid	2024-02-15 12:14:14 +08:00
linuswck	e29898f8f8	fix typos	2024-02-15 12:14:14 +08:00
linuswck	60a79d1780	rename get_term_status -> get_lf_mod_in_impedance	2024-02-15 12:14:14 +08:00