1
0
Fork 0

use openocd files from zynq-rs

This commit is contained in:
Sebastien Bourdeauducq 2020-09-09 15:44:29 +08:00
parent 4dfd82f6ec
commit c3f9a76f2a
6 changed files with 19 additions and 143 deletions

View File

@ -21,19 +21,21 @@ done
load_bitstream_cmd=""
cd openocd
build_dir=`pwd`/build
result_dir=`pwd`/result
cd $OPENOCD_ZYNQ
if [ $impure -eq 1 ]; then
if [ $load_bitstream -eq 1 ]; then
load_bitstream_cmd="-g ../build/gateware/top.bit"
load_bitstream_cmd="-g $build_dir/gateware/top.bit"
fi
openocd -f zc706.cfg -c "load_image ../build/firmware/armv7-none-eabihf/debug/szl; resume 0; exit"
openocd -f zc706.cfg -c "load_image $build_dir/firmware/armv7-none-eabihf/debug/szl; resume 0; exit"
sleep 5
artiq_netboot $load_bitstream_cmd -f ../build/runtime.bin -b $board_host
artiq_netboot $load_bitstream_cmd -f $build_dir/runtime.bin -b $board_host
else
if [ $load_bitstream -eq 1 ]; then
load_bitstream_cmd="-g ../result/top.bit"
load_bitstream_cmd="-g $result_dir/top.bit"
fi
openocd -f zc706.cfg -c "load_image ../result/szl.elf; resume 0; exit"
openocd -f zc706.cfg -c "load_image $result_dir/szl.elf; resume 0; exit"
sleep 5
artiq_netboot $load_bitstream_cmd -f ../result/runtime.bin -b $board_host
artiq_netboot $load_bitstream_cmd -f $result_dir/runtime.bin -b $board_host
fi

View File

@ -1,40 +0,0 @@
source [find interface/ftdi/olimex-arm-usb-tiny-h.cfg]
adapter_khz 1000
set PL_TAPID 0x23731093
set SMP 1
source ./zynq-7000.cfg
reset_config srst_only srst_open_drain
adapter_nsrst_assert_width 250
adapter_nsrst_delay 400
set XC7_JSHUTDOWN 0x0d
set XC7_JPROGRAM 0x0b
set XC7_JSTART 0x0c
set XC7_BYPASS 0x3f
proc xc7_program {tap} {
global XC7_JSHUTDOWN XC7_JPROGRAM XC7_JSTART XC7_BYPASS
irscan $tap $XC7_JSHUTDOWN
irscan $tap $XC7_JPROGRAM
runtest 60000
#JSTART prevents this from working...
#irscan $tap $XC7_JSTART
runtest 2000
irscan $tap $XC7_BYPASS
runtest 2000
}
pld device virtex2 zynq.tap 1
init
xc7_program zynq.tap
reset halt
# Disable MMU
targets $_TARGETNAME_1
arm mcr 15 0 1 0 0 [expr [arm mrc 15 0 1 0 0] & ~0xd]
targets $_TARGETNAME_0
arm mcr 15 0 1 0 0 [expr [arm mrc 15 0 1 0 0] & ~0xd]

View File

@ -1,95 +0,0 @@
#
# Xilinx Zynq 7000 SoC
#
# Chris Johns <chrisj@rtems.org>
#
# Setup
# -----
#
# Create a user configuration following the "Configuration Basics" in the user
# documentation. In the file have:
#
# source [find interface/ftdi/flyswatter2.cfg]
# source [find board/zynq-zc706-eval.cfg]
# adapter_khz 2000
# init
#
if { [info exists CHIPNAME] } {
global _CHIPNAME
set _CHIPNAME $CHIPNAME
} else {
global _CHIPNAME
set _CHIPNAME zynq
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
# this defaults to a bigendian
set _ENDIAN little
}
if { [info exists SMP] } {
global _SMP
set _SMP 1
} else {
global _SMP
set _SMP 0
}
#
# PL Tap.
#
# See ug585 ZYNQ-7000 TRM PSS_IDCODE for how this number is constructed.
# 0x03731093 - ZC706 Eval board 1.1
# 0x23731093 - ??
# 0x23727093 - Zedboard Rev. C and D
#
# Set in your configuration file or board specific file.
#
if { [info exists PL_TAPID] } {
set _PL_TAPID $PL_TAPID
} else {
set _PL_TAPID 0x03731093
}
jtag newtap $_CHIPNAME tap -irlen 6 -ircapture 0x001 -irmask 0x003 \
-expected-id $_PL_TAPID
#
# CoreSight Debug Access Port
#
if { [info exists DAP_TAPID] } {
set _DAP_TAPID $DAP_TAPID
} else {
set _DAP_TAPID 0x4ba00477
}
jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x01 -irmask 0x03 \
-expected-id $_DAP_TAPID
#
# GDB target: Cortex-A9, using DAP, configuring only one core
# Base addresses of cores:
# core 0 - 0xF8890000
# core 1 - 0xF8892000
#
# Read from the ROM table with the patch to read the nested table.
#
set _TARGETNAME_0 $_CHIPNAME.cpu.0
set _TARGETNAME_1 $_CHIPNAME.cpu.1
target create $_TARGETNAME_0 cortex_a -coreid 0 \
-endian $_ENDIAN \
-chain-position $_CHIPNAME.dap \
-dbgbase 0x80090000
if { $_SMP } {
echo "Zynq CPU1."
target create $_TARGETNAME_1 cortex_a -coreid 1 \
-endian $_ENDIAN \
-chain-position $_CHIPNAME.dap \
-dbgbase 0x80092000
target smp $_TARGETNAME_0 $_TARGETNAME_1
}

View File

@ -36,7 +36,7 @@ load_bitstream_cmd=""
echo "Creating $target_folder..."
ssh $sshopts $target_host "mkdir -p $target_folder"
echo "Copying files..."
rsync -e "ssh $sshopts" openocd/* $target_host:$target_folder
rsync -e "ssh $sshopts" $OPENOCD_ZYNQ/* $target_host:$target_folder
if [ $impure -eq 1 ]; then
if [ $load_bitstream -eq 1 ]; then
load_bitstream_cmd="-g build/gateware/top.bit"

View File

@ -1,6 +1,7 @@
let
pkgs = import <nixpkgs> { overlays = [ (import ./mozilla-overlay.nix) ]; };
artiq-fast = <artiq-fast>;
zynq-rs = (import ./zynq-rs.nix { inherit pkgs; });
rustPlatform = (import ./rustPlatform.nix { inherit pkgs; });
artiqpkgs = import "${artiq-fast}/default.nix" { inherit pkgs; };
vivado = import "${artiq-fast}/vivado.nix" { inherit pkgs; };
@ -28,4 +29,5 @@ in
];
XARGO_RUST_SRC = "${rustPlatform.rust.rustc.src}/src";
OPENOCD_ZYNQ = "${zynq-rs}/openocd";
}

7
zynq-rs.nix Normal file
View File

@ -0,0 +1,7 @@
{ pkgs }:
pkgs.fetchgit {
url = "https://git.m-labs.hk/M-Labs/zynq-rs.git";
rev = "4e18368aaf59c29e703d5ecae6c0eb93ef89c2d2";
sha256 = "0jfnjn76pfq5wp6qnxhkqmvldv02cy60wyp1ikaj9n47p69cabj8";
}