# Pounder_test

This Pounder quick noise floor test folder is forked from [quartiq_stabilizer](https://github.com/quartiq/stabilizer/tree/323ed54989992b613d65a0bb9711728ac24cf22a). Check out quartiq/stabilizer github page for more details. 

For this quick test, I simply hard code the Pounder DDS setting in the init section in src/bin/pdh-test.rs , currently the DDS setting in this pdh-test has no MQTT control support yet. The stabilizer DAC is disabled and set to 0 here for simplicity. Change anything ask you like. 


## How to use this

This nix shell cotains rust, mqtt-explorer ... and python packages of gmqtt, miniconf-mqtt and some other packages. Simply clone this repo and run this to set up the environment. I only tested it with nixos-21.05 channel.  
```
nix-shell shell.nix
```


Connect stabilizer JTAG connector to a ST-link V2 (or other debuggers) and then connect the debugger to your PC. Run the pdh-test.rs by calling this in the terminal: (Cargo.toml default features contain pounder_v1_1 and the broker IP is set to be 192.168.1.139 , change it if necessary) 
```
BROKER="192.168.1.139" cargo run --release --bin pdh-test
```


Open another terminal and start mosquitto broker with this:
```
mosquitto -c mosquitto.conf
```


Open another terminal and change the stabilizer setting via MQTT. For example this will change the gain of the stabilizer ADC_ch0 to 10 (change the broker IP and topic path's mac address to your own one) and you should see the update log in the cargo run terminal: 
```
python -m miniconf --broker 192.168.1.139 dt/sinara/pdh-test/04-91-62-d9-f5-e5 afe/0='"G10"'    
```

Another example is to start the stabilizer UDP datastream, which is currently streaming data of (adc_0, adc_1, dac_0, dac_1). You can change the UDP listener IP and port. To turn it off, just set the target ip to 0.0.0.0 and port to 0. 
```
python -m miniconf --broker 192.168.1.139 dt/sinara/pdh-test/04-91-62-d9-f5-e5 stream_target='{"ip":[192,168,1,139], "port":1883}'       
```

To see and plot the stabilizer ADC_ch0 data, run this. Change the port and the python file if you want to plot data of other adc or dac channel.
```
python scripts/stabilizer_adc_stream_test.py --port 1883      
```