diff --git a/src/main.rs b/src/main.rs index 48719ca..eab602c 100644 --- a/src/main.rs +++ b/src/main.rs @@ -50,6 +50,7 @@ mod build_info { } fn pwr_setup(pwr: &stm32::PWR) { + // go to VOS1 voltage scale for high perf pwr.pwr_cr3.write(|w| w.sden().set_bit() .ldoen().set_bit() @@ -272,7 +273,7 @@ fn gpio_setup(gpioa: &stm32::GPIOA, gpiob: &stm32::GPIOB, gpiod: &stm32::GPIOD, fn spi1_setup(spi1: &stm32::SPI1) { spi1.cfg1.modify(|_, w| unsafe { - w.mbr().bits(0) // clk/2 + w.mbr().bits(1) // clk/4 .dsize().bits(16 - 1) .fthvl().bits(1 - 1) // one data }); @@ -290,7 +291,7 @@ fn spi1_setup(spi1: &stm32::SPI1) { .comm().bits(0b10) // simplex receiver .ioswp().clear_bit() .midi().bits(0) // master inter data idle - .mssi().bits(11) // master SS idle + .mssi().bits(6) // master SS idle }); spi1.cr2.modify(|_, w| unsafe { w.tsize().bits(1) @@ -327,13 +328,13 @@ fn spi2_setup(spi2: &stm32::SPI2) { } fn tim2_setup(tim2: &stm32::TIM2) { - tim2.psc.write(|w| unsafe { w.psc().bits(100 - 1) }); - tim2.arr.write(|w| unsafe { w.bits(10 - 1) }); - tim2.dier.write(|w| w.ude().set_bit()); - tim2.cr1.modify(|_, w| unsafe { - w.ckd().bits(0b00) // div1 - .dir().clear_bit() // up - .cen().set_bit() }); // enable + tim2.psc.write(|w| unsafe { w.psc().bits(200 - 1) }); // from 200 MHz + tim2.arr.write(|w| unsafe { w.bits(2 - 1) }); // µs + tim2.dier.write(|w| w.ude().set_bit().uie().set_bit()); // FIXME + tim2.egr.write(|w| w.ug().set_bit()); + tim2.cr1.modify(|_, w| + w.dir().clear_bit() // up + .cen().set_bit()); // enable } fn dma1_setup(dma1: &stm32::DMA1, dmamux1: &stm32::DMAMUX1, ma: usize, pa: usize) { @@ -356,11 +357,10 @@ fn dma1_setup(dma1: &stm32::DMA1, dmamux1: &stm32::DMAMUX1, ma: usize, pa: usize .pinc().clear_bit() .pburst().bits(0b00) .dbm().clear_bit() - .dir().bits(0b01) // peripheral_to_memory + .dir().bits(0b01) // memory_to_peripheral .pfctrl().clear_bit() // dma is FC }); - // dma1.s0fcr.modify(|_, w| w.dmdis().clear_bit()); - dma1.lifcr.write(|w| w.ctcif0().set_bit()); + dma1.s0fcr.modify(|_, w| w.dmdis().clear_bit()); dma1.s0cr.modify(|_, w| w.en().set_bit()); } @@ -385,7 +385,6 @@ fn main() -> ! { // info!("Built on {}", build_info::BUILT_TIME_UTC); // info!("{} {}", build_info::RUSTC_VERSION, build_info::TARGET); - // go to VOS1 voltage scale high perf pwr_setup(&dp.PWR); rcc_pll_setup(&rcc, &dp.FLASH); rcc.apb4enr.modify(|_, w| w.syscfgen().set_bit()); @@ -412,81 +411,63 @@ fn main() -> ! { rcc.apb2enr.modify(|_, w| w.spi1en().set_bit()); let spi1 = dp.SPI1; spi1_setup(&spi1); + spi1.ier.write(|w| w.rxpie().set_bit()); rcc.ahb2enr.modify(|_, w| w.sram1en().set_bit()); rcc.ahb1enr.modify(|_, w| w.dma1en().set_bit()); - unsafe { DAT = (1 << 9) | (1 << 0) }; - dma1_setup(&dp.DMA1, &dp.DMAMUX1, unsafe { &DAT as *const _ as usize }, + unsafe { DAT = (1 << 9) | (1 << 0) }; // init SRAM1 rodata can't load with sram1 disabled + cortex_m::asm::dsb(); + dma1_setup(&dp.DMA1, &dp.DMAMUX1, unsafe { &DAT as *const _ } as usize, &spi1.cr1 as *const _ as usize); rcc.apb1lenr.modify(|_, w| w.tim2en().set_bit()); tim2_setup(&dp.TIM2); cortex_m::interrupt::free(|cs| { - spi1.ier.write(|w| w.rxpie().set_bit().eotie().set_bit()); - // stm32::NVIC::unpend(stm32::Interrupt::SPI1); cp.NVIC.enable(stm32::Interrupt::SPI1); - - // spi1.cr1.write(|w| unsafe { w.bits((1 << 9) | (1 << 0)) }); - + cp.NVIC.enable(stm32::Interrupt::TIM2); // FIXME SPI1P.borrow(cs).replace(Some(spi1)); SPI2P.borrow(cs).replace(Some(spi2)); }); loop { - #[cfg(feature = "bkpt")] - cortex_m::asm::bkpt(); - - // cortex_m::asm::wfi(); - info!("{:#x} {:#x} {:#x}", - dp.DMA1.lisr.read().bits(), - dp.DMA1.s0cr.read().bits(), - dp.DMA1.s0ndtr.read().bits()); - // dp.DMA1.lifcr.write(|w| w.ctcif0().set_bit()); - // dp.DMA1.s0cr.write(|w| w.en().set_bit()); - let mut sr = 0; - let mut cr = 0; - cortex_m::interrupt::free(|cs| { - let spi1p = SPI1P.borrow(cs).borrow(); - let spi1 = spi1p.as_ref().unwrap(); - sr = spi1.sr.read().bits(); - cr = spi1.cr1.read().bits(); - }); - info!("{:#x} {:#x}", sr, cr); - - #[cfg(feature = "bkpt")] - cortex_m::asm::bkpt(); + cortex_m::asm::wfi(); } } +#[interrupt] +fn TIM2() { // FIXME + let dp = unsafe { Peripherals::steal() }; + dp.TIM2.sr.modify(|_, w| w.uif().clear_bit()); + dp.SPI1.cr1.write(|w| unsafe { w.bits(0x201) }); +} + + #[interrupt] fn SPI1() { + #[cfg(feature = "bkpt")] + cortex_m::asm::bkpt(); cortex_m::interrupt::free(|cs| { - // let p = unsafe { Peripherals::steal() }; - // let spi1 = p.SPI1; - // let spi2 = p.SPI2; let spi1p = SPI1P.borrow(cs).borrow(); let spi1 = spi1p.as_ref().unwrap(); let spi2p = SPI2P.borrow(cs).borrow(); let spi2 = spi2p.as_ref().unwrap(); let sr = spi1.sr.read(); if sr.eot().bit_is_set() { - spi1.ifcr.write(|w| w.eotc().set_bit()); + spi1.ifcr.write(|w| w.eotc().set_bit()); } if sr.rxp().bit_is_set() { // needs to be a half word read let rxdr1 = &spi1.rxdr as *const _ as *const u16; let a = unsafe { ptr::read_volatile(rxdr1) }; - // while spi2.sr.read().txp().bit_is_clear() {} // needs to be a half word write let txdr2 = &spi2.txdr as *const _ as *mut u16; unsafe { ptr::write_volatile(txdr2, a ^ 0x8000) }; info!("adc: {:#x}", a); - while spi2.sr.read().txc().bit_is_clear() {} - // at least one SCK between EOT and CSTART - // spi1.cr1.modify(|r, w| unsafe { w.bits(r.bits() | (1 << 9)) }); } }); + #[cfg(feature = "bkpt")] + cortex_m::asm::bkpt(); } #[exception]