Undo most of Si5324 unification (5c054cc901)

This reverts most of 5c054cc901, as it turns out that
si5324::setup is in fact also used to configure the
chip for operation as a DRTIO satellite.
This commit is contained in:
David Nadlinger 2022-12-17 01:31:14 +00:00
parent 5c054cc901
commit 2ddb4d259f
2 changed files with 97 additions and 79 deletions

View File

@ -219,11 +219,8 @@ pub fn bypass(i2c: &mut I2c, input: Input, timer: &mut GlobalTimer) -> Result<()
Ok(()) Ok(())
} }
pub fn setup(i2c: &mut I2c, settings: &FrequencySettings, ext_input: Input, timer: &mut GlobalTimer) -> Result<()> { pub fn setup(i2c: &mut I2c, settings: &FrequencySettings, input: Input, timer: &mut GlobalTimer) -> Result<()> {
let s = map_frequency_settings(settings)?; let s = map_frequency_settings(settings)?;
// FREE_RUN=1 routes XA/XB to CKIN2.
let input = if settings.crystal_ref { Input::Ckin2 } else { ext_input };
let cksel_reg = match input { let cksel_reg = match input {
Input::Ckin1 => 0b00, Input::Ckin1 => 0b00,
Input::Ckin2 => 0b01, Input::Ckin2 => 0b01,

View File

@ -121,100 +121,121 @@ const SI5324_EXT_INPUT: si5324::Input = si5324::Input::Ckin1;
#[cfg(has_si5324)] #[cfg(has_si5324)]
fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) { fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
let si5324_settings = match clk { let (si5324_settings, si5324_ref_input) = match clk {
RtioClock::Ext0_Synth0_10to125 => { // 125 MHz output from 10 MHz CLKINx reference, 504 Hz BW RtioClock::Ext0_Synth0_10to125 => { // 125 MHz output from 10 MHz CLKINx reference, 504 Hz BW
info!("using 10MHz reference to make 125MHz RTIO clock with PLL"); info!("using 10MHz reference to make 125MHz RTIO clock with PLL");
si5324::FrequencySettings { (
n1_hs : 10, si5324::FrequencySettings {
nc1_ls : 4, n1_hs : 10,
n2_hs : 10, nc1_ls : 4,
n2_ls : 300, n2_hs : 10,
n31 : 6, n2_ls : 300,
n32 : 6, n31 : 6,
bwsel : 4, n32 : 6,
crystal_ref: false bwsel : 4,
} crystal_ref: false
},
SI5324_EXT_INPUT
)
}, },
RtioClock::Ext0_Synth0_100to125 => { // 125MHz output, from 100MHz CLKINx reference, 586 Hz loop bandwidth RtioClock::Ext0_Synth0_100to125 => { // 125MHz output, from 100MHz CLKINx reference, 586 Hz loop bandwidth
info!("using 100MHz reference to make 125MHz RTIO clock with PLL"); info!("using 100MHz reference to make 125MHz RTIO clock with PLL");
si5324::FrequencySettings { (
n1_hs : 10, si5324::FrequencySettings {
nc1_ls : 4, n1_hs : 10,
n2_hs : 10, nc1_ls : 4,
n2_ls : 260, n2_hs : 10,
n31 : 52, n2_ls : 260,
n32 : 52, n31 : 52,
bwsel : 4, n32 : 52,
crystal_ref: false bwsel : 4,
} crystal_ref: false
},
SI5324_EXT_INPUT
)
}, },
RtioClock::Ext0_Synth0_125to125 => { // 125MHz output, from 125MHz CLKINx reference, 606 Hz loop bandwidth RtioClock::Ext0_Synth0_125to125 => { // 125MHz output, from 125MHz CLKINx reference, 606 Hz loop bandwidth
info!("using 125MHz reference to make 125MHz RTIO clock with PLL"); info!("using 125MHz reference to make 125MHz RTIO clock with PLL");
si5324::FrequencySettings { (
n1_hs : 5, si5324::FrequencySettings {
nc1_ls : 8, n1_hs : 5,
n2_hs : 7, nc1_ls : 8,
n2_ls : 360, n2_hs : 7,
n31 : 63, n2_ls : 360,
n32 : 63, n31 : 63,
bwsel : 4, n32 : 63,
crystal_ref: false bwsel : 4,
} crystal_ref: false
},
SI5324_EXT_INPUT
)
}, },
RtioClock::Int_150 => { // 150MHz output, from crystal RtioClock::Int_150 => { // 150MHz output, from crystal
info!("using internal 150MHz RTIO clock"); info!("using internal 150MHz RTIO clock");
si5324::FrequencySettings { (
n1_hs : 9, si5324::FrequencySettings {
nc1_ls : 4, n1_hs : 9,
n2_hs : 10, nc1_ls : 4,
n2_ls : 33732, n2_hs : 10,
n31 : 7139, n2_ls : 33732,
n32 : 7139, n31 : 7139,
bwsel : 3, n32 : 7139,
crystal_ref: true bwsel : 3,
} crystal_ref: true
},
si5324::Input::Ckin2
)
}, },
RtioClock::Int_100 => { // 100MHz output, from crystal RtioClock::Int_100 => { // 100MHz output, from crystal
info!("using internal 100MHz RTIO clock"); info!("using internal 100MHz RTIO clock");
si5324::FrequencySettings { (
n1_hs : 9, si5324::FrequencySettings {
nc1_ls : 6, n1_hs : 9,
n2_hs : 10, nc1_ls : 6,
n2_ls : 33732, n2_hs : 10,
n31 : 7139, n2_ls : 33732,
n32 : 7139, n31 : 7139,
bwsel : 3, n32 : 7139,
crystal_ref: true bwsel : 3,
} crystal_ref: true
},
si5324::Input::Ckin2
)
}, },
RtioClock::Int_125 => { // 125MHz output, from crystal, 7 Hz RtioClock::Int_125 => { // 125MHz output, from crystal, 7 Hz
info!("using internal 125MHz RTIO clock"); info!("using internal 125MHz RTIO clock");
si5324::FrequencySettings { (
n1_hs : 10, si5324::FrequencySettings {
nc1_ls : 4, n1_hs : 10,
n2_hs : 10, nc1_ls : 4,
n2_ls : 19972, n2_hs : 10,
n31 : 4565, n2_ls : 19972,
n32 : 4565, n31 : 4565,
bwsel : 4, n32 : 4565,
crystal_ref: true bwsel : 4,
} crystal_ref: true
} },
_ => { // 125MHz output like above, default (if chosen option is not supported) si5324::Input::Ckin2
warn!("rtio_clock setting '{:?}' is not supported. Falling back to default internal 125MHz RTIO clock.", clk); )
si5324::FrequencySettings { },
n1_hs : 10, _ => { // same setting as Int_125, but fallback to default
nc1_ls : 4, warn!("rtio_clock setting '{:?}' is unsupported. Falling back to default internal 125MHz RTIO clock.", clk);
n2_hs : 10, (
n2_ls : 19972, si5324::FrequencySettings {
n31 : 4565, n1_hs : 10,
n32 : 4565, nc1_ls : 4,
bwsel : 4, n2_hs : 10,
crystal_ref: true n2_ls : 19972,
} n31 : 4565,
n32 : 4565,
bwsel : 4,
crystal_ref: true
},
si5324::Input::Ckin2
)
} }
}; };
si5324::setup(i2c, &si5324_settings, SI5324_EXT_INPUT, timer).expect("cannot initialize Si5324"); si5324::setup(i2c, &si5324_settings, si5324_ref_input, timer).expect("cannot initialize Si5324");
} }
pub fn init(timer: &mut GlobalTimer, cfg: &Config) { pub fn init(timer: &mut GlobalTimer, cfg: &Config) {