README: add pid units

This commit is contained in:
Astro 2020-12-07 23:18:44 +01:00
parent 2a6f8ed874
commit ffcc3f661b
1 changed files with 8 additions and 8 deletions

View File

@ -82,8 +82,8 @@ The scope of this setting is per TCP session.
| `pid` | Show PID configuration |
| `pid <0/1> target <value>` | Set the PID controller target |
| `pid <0/1> kp <value>` | Set proportional gain |
| `pid <0/1> ki <value>` | Set integral gain |
| `pid <0/1> kd <value>` | Set differential gain |
| `pid <0/1> ki <value>` | Set integral gain (unit: 10 Hz) |
| `pid <0/1> kd <value>` | Set differential gain (unit: 0.1 seconds) |
| `pid <0/1> output_min <value>` | Set mininum output |
| `pid <0/1> output_max <value>` | Set maximum output |
| `pid <0/1> integral_min <value>` | Set integral lower bound |
@ -151,7 +151,7 @@ Use the `pwm` command to see current settings and maximum values.
| `max_v` | Volts | Maximum voltage |
| `max_i_pos` | Amperes | Maximum positive current |
| `max_i_neg` | Amperes | Maximum negative current |
| | Amperes | Output current control |
| | Amperes | Output current control (Open-loop mode) |
Example: set the maximum voltage of channel 0 to 1.5 V.
```