forked from M-Labs/thermostat
main.rs refactor to reduce length (#60)
Move command handling to command_handler.rs to shorten main.rs Reviewed-on: M-Labs/thermostat#60 Co-authored-by: topquark12 <aw@m-labs.hk> Co-committed-by: topquark12 <aw@m-labs.hk>
This commit is contained in:
parent
a5d8661b10
commit
e6a5c31db6
|
|
@ -0,0 +1,373 @@
|
|||
use smoltcp::socket::TcpSocket;
|
||||
use log::{error, warn};
|
||||
use core::fmt::Write;
|
||||
use super::{
|
||||
net,
|
||||
command_parser::{
|
||||
Ipv4Config,
|
||||
Command,
|
||||
ShowCommand,
|
||||
CenterPoint,
|
||||
PidParameter,
|
||||
PwmPin,
|
||||
ShParameter
|
||||
},
|
||||
leds::Leds,
|
||||
ad7172,
|
||||
CHANNEL_CONFIG_KEY,
|
||||
channels::{
|
||||
Channels,
|
||||
CHANNELS
|
||||
},
|
||||
config::ChannelConfig,
|
||||
dfu,
|
||||
flash_store::FlashStore,
|
||||
session::Session
|
||||
};
|
||||
|
||||
use uom::{
|
||||
si::{
|
||||
f64::{
|
||||
ElectricCurrent,
|
||||
ElectricPotential,
|
||||
ElectricalResistance,
|
||||
ThermodynamicTemperature,
|
||||
},
|
||||
electric_current::ampere,
|
||||
electric_potential::volt,
|
||||
electrical_resistance::ohm,
|
||||
thermodynamic_temperature::degree_celsius,
|
||||
},
|
||||
};
|
||||
|
||||
#[derive(Debug, Clone, PartialEq)]
|
||||
pub enum Handler {
|
||||
Handled,
|
||||
CloseSocket,
|
||||
NewIPV4(Ipv4Config),
|
||||
Reset,
|
||||
}
|
||||
|
||||
#[derive(Clone, Debug, PartialEq)]
|
||||
pub enum Error {
|
||||
ReportError,
|
||||
PostFilterRateError,
|
||||
FlashError
|
||||
}
|
||||
|
||||
fn send_line(socket: &mut TcpSocket, data: &[u8]) -> bool {
|
||||
let send_free = socket.send_capacity() - socket.send_queue();
|
||||
if data.len() > send_free + 1 {
|
||||
// Not enough buffer space, skip report for now,
|
||||
// instead of sending incomplete line
|
||||
warn!(
|
||||
"TCP socket has only {}/{} needed {}",
|
||||
send_free + 1, socket.send_capacity(), data.len(),
|
||||
);
|
||||
} else {
|
||||
match socket.send_slice(&data) {
|
||||
Ok(sent) if sent == data.len() => {
|
||||
let _ = socket.send_slice(b"\n");
|
||||
// success
|
||||
return true
|
||||
}
|
||||
Ok(sent) =>
|
||||
warn!("sent only {}/{} bytes", sent, data.len()),
|
||||
Err(e) =>
|
||||
error!("error sending line: {:?}", e),
|
||||
}
|
||||
}
|
||||
// not success
|
||||
false
|
||||
}
|
||||
|
||||
impl Handler {
|
||||
|
||||
fn reporting(socket: &mut TcpSocket) -> Result<Handler, Error> {
|
||||
send_line(socket, b"{}");
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn show_report_mode(socket: &mut TcpSocket, session: &Session) -> Result<Handler, Error> {
|
||||
let _ = writeln!(socket, "{{ \"report\": {:?} }}", session.reporting());
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn show_report(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
|
||||
match channels.reports_json() {
|
||||
Ok(buf) => {
|
||||
send_line(socket, &buf[..]);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize report: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
return Err(Error::ReportError);
|
||||
}
|
||||
}
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn show_pid(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
|
||||
match channels.pid_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize pid summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
return Err(Error::ReportError);
|
||||
}
|
||||
}
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn show_pwm(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
|
||||
match channels.pwm_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize pwm summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
return Err(Error::ReportError);
|
||||
}
|
||||
}
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn show_steinhart_hart(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
|
||||
match channels.steinhart_hart_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize steinhart-hart summaries: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
return Err(Error::ReportError);
|
||||
}
|
||||
}
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn show_post_filter (socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
|
||||
match channels.postfilter_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize postfilter summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
return Err(Error::ReportError);
|
||||
}
|
||||
}
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn show_ipv4 (socket: &mut TcpSocket, ipv4_config: &mut Ipv4Config) -> Result<Handler, Error> {
|
||||
let (cidr, gateway) = net::split_ipv4_config(ipv4_config.clone());
|
||||
let _ = write!(socket, "{{\"addr\":\"{}\"", cidr);
|
||||
gateway.map(|gateway| write!(socket, ",\"gateway\":\"{}\"", gateway));
|
||||
let _ = writeln!(socket, "}}");
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn engage_pid (socket: &mut TcpSocket, channels: &mut Channels, leds: &mut Leds, channel: usize) -> Result<Handler, Error> {
|
||||
channels.channel_state(channel).pid_engaged = true;
|
||||
leds.g3.on();
|
||||
send_line(socket, b"{}");
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn set_pwm (socket: &mut TcpSocket, channels: &mut Channels, leds: &mut Leds, channel: usize, pin: PwmPin, value: f64) -> Result<Handler, Error> {
|
||||
match pin {
|
||||
PwmPin::ISet => {
|
||||
channels.channel_state(channel).pid_engaged = false;
|
||||
leds.g3.off();
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_i(channel, current);
|
||||
channels.power_up(channel);
|
||||
}
|
||||
PwmPin::MaxV => {
|
||||
let voltage = ElectricPotential::new::<volt>(value);
|
||||
channels.set_max_v(channel, voltage);
|
||||
}
|
||||
PwmPin::MaxIPos => {
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_max_i_pos(channel, current);
|
||||
}
|
||||
PwmPin::MaxINeg => {
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_max_i_neg(channel, current);
|
||||
}
|
||||
}
|
||||
send_line(socket, b"{}");
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn set_center_point(socket: &mut TcpSocket, channels: &mut Channels, channel: usize, center: CenterPoint) -> Result<Handler, Error> {
|
||||
let i_tec = channels.get_i(channel);
|
||||
let state = channels.channel_state(channel);
|
||||
state.center = center;
|
||||
if !state.pid_engaged {
|
||||
channels.set_i(channel, i_tec);
|
||||
}
|
||||
send_line(socket, b"{}");
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn set_pid (socket: &mut TcpSocket, channels: &mut Channels, channel: usize, parameter: PidParameter, value: f64) -> Result<Handler, Error> {
|
||||
let pid = &mut channels.channel_state(channel).pid;
|
||||
use super::command_parser::PidParameter::*;
|
||||
match parameter {
|
||||
Target =>
|
||||
pid.target = value,
|
||||
KP =>
|
||||
pid.parameters.kp = value as f32,
|
||||
KI =>
|
||||
pid.update_ki(value as f32),
|
||||
KD =>
|
||||
pid.parameters.kd = value as f32,
|
||||
OutputMin =>
|
||||
pid.parameters.output_min = value as f32,
|
||||
OutputMax =>
|
||||
pid.parameters.output_max = value as f32,
|
||||
IntegralMin =>
|
||||
pid.parameters.integral_min = value as f32,
|
||||
IntegralMax =>
|
||||
pid.parameters.integral_max = value as f32,
|
||||
}
|
||||
send_line(socket, b"{}");
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn set_steinhart_hart (socket: &mut TcpSocket, channels: &mut Channels, channel: usize, parameter: ShParameter, value: f64) -> Result<Handler, Error> {
|
||||
let sh = &mut channels.channel_state(channel).sh;
|
||||
use super::command_parser::ShParameter::*;
|
||||
match parameter {
|
||||
T0 => sh.t0 = ThermodynamicTemperature::new::<degree_celsius>(value),
|
||||
B => sh.b = value,
|
||||
R0 => sh.r0 = ElectricalResistance::new::<ohm>(value),
|
||||
}
|
||||
send_line(socket, b"{}");
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn reset_post_filter (socket: &mut TcpSocket, channels: &mut Channels, channel: usize) -> Result<Handler, Error> {
|
||||
channels.adc.set_postfilter(channel as u8, None).unwrap();
|
||||
send_line(socket, b"{}");
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn set_post_filter (socket: &mut TcpSocket, channels: &mut Channels, channel: usize, rate: f32) -> Result<Handler, Error> {
|
||||
let filter = ad7172::PostFilter::closest(rate);
|
||||
match filter {
|
||||
Some(filter) => {
|
||||
channels.adc.set_postfilter(channel as u8, Some(filter)).unwrap();
|
||||
send_line(socket, b"{}");
|
||||
}
|
||||
None => {
|
||||
error!("unable to choose postfilter for rate {:.3}", rate);
|
||||
send_line(socket, b"{{\"error\": \"unable to choose postfilter rate\"}}");
|
||||
return Err(Error::PostFilterRateError);
|
||||
}
|
||||
}
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn load_channel (socket: &mut TcpSocket, channels: &mut Channels, store: &mut FlashStore, channel: Option<usize>) -> Result<Handler, Error> {
|
||||
for c in 0..CHANNELS {
|
||||
if channel.is_none() || channel == Some(c) {
|
||||
match store.read_value::<ChannelConfig>(CHANNEL_CONFIG_KEY[c]) {
|
||||
Ok(Some(config)) => {
|
||||
config.apply(channels, c);
|
||||
send_line(socket, b"{}");
|
||||
}
|
||||
Ok(None) => {
|
||||
error!("flash config not found");
|
||||
send_line(socket, b"{{\"error\": \"flash config not found\"}}");
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to load config from flash: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
return Err(Error::FlashError);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn save_channel (socket: &mut TcpSocket, channels: &mut Channels, channel: Option<usize>, store: &mut FlashStore) -> Result<Handler, Error> {
|
||||
for c in 0..CHANNELS {
|
||||
let mut store_value_buf = [0u8; 256];
|
||||
if channel.is_none() || channel == Some(c) {
|
||||
let config = ChannelConfig::new(channels, c);
|
||||
match store.write_value(CHANNEL_CONFIG_KEY[c], &config, &mut store_value_buf) {
|
||||
Ok(()) => {
|
||||
send_line(socket, b"{}");
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to save channel {} config to flash: {:?}", c, e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
return Err(Error::FlashError);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
Ok(Handler::Handled)
|
||||
}
|
||||
|
||||
fn set_ipv4 (socket: &mut TcpSocket, store: &mut FlashStore, config: Ipv4Config) -> Result<Handler, Error> {
|
||||
let _ = store
|
||||
.write_value("ipv4", &config, [0; 16])
|
||||
.map_err(|e| error!("unable to save ipv4 config to flash: {:?}", e));
|
||||
let new_ipv4_config = Some(config);
|
||||
send_line(socket, b"{}");
|
||||
Ok(Handler::NewIPV4(new_ipv4_config.unwrap()))
|
||||
}
|
||||
|
||||
fn reset (channels: &mut Channels) -> Result<Handler, Error> {
|
||||
for i in 0..CHANNELS {
|
||||
channels.power_down(i);
|
||||
}
|
||||
// should_reset = true;
|
||||
Ok(Handler::Reset)
|
||||
}
|
||||
|
||||
fn dfu (channels: &mut Channels) -> Result<Handler, Error> {
|
||||
for i in 0..CHANNELS {
|
||||
channels.power_down(i);
|
||||
}
|
||||
unsafe {
|
||||
dfu::set_dfu_trigger();
|
||||
}
|
||||
// should_reset = true;
|
||||
Ok(Handler::Reset)
|
||||
}
|
||||
|
||||
pub fn handle_command (command: Command, socket: &mut TcpSocket, channels: &mut Channels, session: &Session, leds: &mut Leds, store: &mut FlashStore, ipv4_config: &mut Ipv4Config) -> Result<Self, Error> {
|
||||
match command {
|
||||
Command::Quit => Ok(Handler::CloseSocket),
|
||||
Command::Reporting(_reporting) => Handler::reporting(socket),
|
||||
Command::Show(ShowCommand::Reporting) => Handler::show_report_mode(socket, session),
|
||||
Command::Show(ShowCommand::Input) => Handler::show_report(socket, channels),
|
||||
Command::Show(ShowCommand::Pid) => Handler::show_pid(socket, channels),
|
||||
Command::Show(ShowCommand::Pwm) => Handler::show_pwm(socket, channels),
|
||||
Command::Show(ShowCommand::SteinhartHart) => Handler::show_steinhart_hart(socket, channels),
|
||||
Command::Show(ShowCommand::PostFilter) => Handler::show_post_filter(socket, channels),
|
||||
Command::Show(ShowCommand::Ipv4) => Handler::show_ipv4(socket, ipv4_config),
|
||||
Command::PwmPid { channel } => Handler::engage_pid(socket, channels, leds, channel),
|
||||
Command::Pwm { channel, pin, value } => Handler::set_pwm(socket, channels, leds, channel, pin, value),
|
||||
Command::CenterPoint { channel, center } => Handler::set_center_point(socket, channels, channel, center),
|
||||
Command::Pid { channel, parameter, value } => Handler::set_pid(socket, channels, channel, parameter, value),
|
||||
Command::SteinhartHart { channel, parameter, value } => Handler::set_steinhart_hart(socket, channels, channel, parameter, value),
|
||||
Command::PostFilter { channel, rate: None } => Handler::reset_post_filter(socket, channels, channel),
|
||||
Command::PostFilter { channel, rate: Some(rate) } => Handler::set_post_filter(socket, channels, channel, rate),
|
||||
Command::Load { channel } => Handler::load_channel(socket, channels, store, channel),
|
||||
Command::Save { channel } => Handler::save_channel(socket, channels, channel, store),
|
||||
Command::Ipv4(config) => Handler::set_ipv4(socket, store, config),
|
||||
Command::Reset => Handler::reset(channels),
|
||||
Command::Dfu => Handler::dfu(channels)
|
||||
}
|
||||
}
|
||||
}
|
||||
245
src/main.rs
245
src/main.rs
|
|
@ -11,7 +11,6 @@ use panic_semihosting as _;
|
|||
|
||||
use log::{error, info, warn};
|
||||
|
||||
use core::fmt::Write;
|
||||
use cortex_m::asm::wfi;
|
||||
use cortex_m_rt::entry;
|
||||
use stm32f4xx_hal::{
|
||||
|
|
@ -26,20 +25,6 @@ use smoltcp::{
|
|||
socket::TcpSocket,
|
||||
wire::EthernetAddress,
|
||||
};
|
||||
use uom::{
|
||||
si::{
|
||||
f64::{
|
||||
ElectricCurrent,
|
||||
ElectricPotential,
|
||||
ElectricalResistance,
|
||||
ThermodynamicTemperature,
|
||||
},
|
||||
electric_current::ampere,
|
||||
electric_potential::volt,
|
||||
electrical_resistance::ohm,
|
||||
thermodynamic_temperature::degree_celsius,
|
||||
},
|
||||
};
|
||||
|
||||
mod init_log;
|
||||
use init_log::init_log;
|
||||
|
|
@ -55,7 +40,7 @@ use server::Server;
|
|||
mod session;
|
||||
use session::{Session, SessionInput};
|
||||
mod command_parser;
|
||||
use command_parser::{Command, Ipv4Config, PwmPin, ShowCommand};
|
||||
use command_parser::Ipv4Config;
|
||||
mod timer;
|
||||
mod pid;
|
||||
mod steinhart_hart;
|
||||
|
|
@ -67,6 +52,8 @@ mod config;
|
|||
use config::ChannelConfig;
|
||||
mod flash_store;
|
||||
mod dfu;
|
||||
mod command_handler;
|
||||
use command_handler::Handler;
|
||||
|
||||
const HSE: MegaHertz = MegaHertz(8);
|
||||
#[cfg(not(feature = "semihosting"))]
|
||||
|
|
@ -149,7 +136,7 @@ fn main() -> ! {
|
|||
usb::State::setup(usb);
|
||||
|
||||
let mut store = flash_store::store(dp.FLASH);
|
||||
let mut store_value_buf = [0u8; 256];
|
||||
|
||||
|
||||
let mut channels = Channels::new(pins);
|
||||
for c in 0..CHANNELS {
|
||||
|
|
@ -218,223 +205,13 @@ fn main() -> ! {
|
|||
// socket RX ring buffer wraps around, or when the command is sent as seperate TCP packets etc.
|
||||
// Do nothing and feed more data to the line reader in the next loop cycle.
|
||||
Ok(SessionInput::Nothing) => {}
|
||||
Ok(SessionInput::Command(command)) => match command {
|
||||
Command::Quit =>
|
||||
socket.close(),
|
||||
Command::Reporting(_reporting) => {
|
||||
// handled by session
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Show(ShowCommand::Reporting) => {
|
||||
let _ = writeln!(socket, "{{ \"report\": {:?} }}", session.reporting());
|
||||
}
|
||||
Command::Show(ShowCommand::Input) => {
|
||||
match channels.reports_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf[..]);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize report: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::Pid) => {
|
||||
match channels.pid_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize pid summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::Pwm) => {
|
||||
match channels.pwm_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize pwm summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::SteinhartHart) => {
|
||||
match channels.steinhart_hart_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize steinhart-hart summaries: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::PostFilter) => {
|
||||
match channels.postfilter_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize postfilter summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::Ipv4) => {
|
||||
let (cidr, gateway) = net::split_ipv4_config(ipv4_config.clone());
|
||||
let _ = write!(socket, "{{\"addr\":\"{}\"", cidr);
|
||||
gateway.map(|gateway| write!(socket, ",\"gateway\":\"{}\"", gateway));
|
||||
let _ = writeln!(socket, "}}");
|
||||
}
|
||||
Command::PwmPid { channel } => {
|
||||
channels.channel_state(channel).pid_engaged = true;
|
||||
leds.g3.on();
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Pwm { channel, pin, value } => {
|
||||
match pin {
|
||||
PwmPin::ISet => {
|
||||
channels.channel_state(channel).pid_engaged = false;
|
||||
leds.g3.off();
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_i(channel, current);
|
||||
channels.power_up(channel);
|
||||
}
|
||||
PwmPin::MaxV => {
|
||||
let voltage = ElectricPotential::new::<volt>(value);
|
||||
channels.set_max_v(channel, voltage);
|
||||
}
|
||||
PwmPin::MaxIPos => {
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_max_i_pos(channel, current);
|
||||
}
|
||||
PwmPin::MaxINeg => {
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_max_i_neg(channel, current);
|
||||
}
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::CenterPoint { channel, center } => {
|
||||
let i_tec = channels.get_i(channel);
|
||||
let state = channels.channel_state(channel);
|
||||
state.center = center;
|
||||
if !state.pid_engaged {
|
||||
channels.set_i(channel, i_tec);
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Pid { channel, parameter, value } => {
|
||||
let pid = &mut channels.channel_state(channel).pid;
|
||||
use command_parser::PidParameter::*;
|
||||
match parameter {
|
||||
Target =>
|
||||
pid.target = value,
|
||||
KP =>
|
||||
pid.parameters.kp = value as f32,
|
||||
KI =>
|
||||
pid.update_ki(value as f32),
|
||||
KD =>
|
||||
pid.parameters.kd = value as f32,
|
||||
OutputMin =>
|
||||
pid.parameters.output_min = value as f32,
|
||||
OutputMax =>
|
||||
pid.parameters.output_max = value as f32,
|
||||
IntegralMin =>
|
||||
pid.parameters.integral_min = value as f32,
|
||||
IntegralMax =>
|
||||
pid.parameters.integral_max = value as f32,
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::SteinhartHart { channel, parameter, value } => {
|
||||
let sh = &mut channels.channel_state(channel).sh;
|
||||
use command_parser::ShParameter::*;
|
||||
match parameter {
|
||||
T0 => sh.t0 = ThermodynamicTemperature::new::<degree_celsius>(value),
|
||||
B => sh.b = value,
|
||||
R0 => sh.r0 = ElectricalResistance::new::<ohm>(value),
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::PostFilter { channel, rate: None } => {
|
||||
channels.adc.set_postfilter(channel as u8, None).unwrap();
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::PostFilter { channel, rate: Some(rate) } => {
|
||||
let filter = ad7172::PostFilter::closest(rate);
|
||||
match filter {
|
||||
Some(filter) => {
|
||||
channels.adc.set_postfilter(channel as u8, Some(filter)).unwrap();
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
None => {
|
||||
error!("unable to choose postfilter for rate {:.3}", rate);
|
||||
send_line(&mut socket, b"{{\"error\": \"unable to choose postfilter rate\"}}");
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Load { channel } => {
|
||||
for c in 0..CHANNELS {
|
||||
if channel.is_none() || channel == Some(c) {
|
||||
match store.read_value::<ChannelConfig>(CHANNEL_CONFIG_KEY[c]) {
|
||||
Ok(Some(config)) => {
|
||||
config.apply(&mut channels, c);
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Ok(None) => {
|
||||
error!("flash config not found");
|
||||
send_line(&mut socket, b"{{\"error\": \"flash config not found\"}}");
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to load config from flash: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Save { channel } => {
|
||||
for c in 0..CHANNELS {
|
||||
if channel.is_none() || channel == Some(c) {
|
||||
let config = ChannelConfig::new(&mut channels, c);
|
||||
match store.write_value(CHANNEL_CONFIG_KEY[c], &config, &mut store_value_buf) {
|
||||
Ok(()) => {
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to save channel {} config to flash: {:?}", c, e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Ipv4(config) => {
|
||||
let _ = store
|
||||
.write_value("ipv4", &config, [0; 16])
|
||||
.map_err(|e| error!("unable to save ipv4 config to flash: {:?}", e));
|
||||
new_ipv4_config = Some(config);
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Reset => {
|
||||
for i in 0..CHANNELS {
|
||||
channels.power_down(i);
|
||||
}
|
||||
should_reset = true;
|
||||
}
|
||||
Command::Dfu => {
|
||||
for i in 0..CHANNELS {
|
||||
channels.power_down(i);
|
||||
}
|
||||
unsafe {
|
||||
dfu::set_dfu_trigger();
|
||||
}
|
||||
should_reset = true;
|
||||
Ok(SessionInput::Command(command)) => {
|
||||
match Handler::handle_command(command, &mut socket, &mut channels, session, &mut leds, &mut store, &mut ipv4_config) {
|
||||
Ok(Handler::NewIPV4(ip)) => new_ipv4_config = Some(ip),
|
||||
Ok(Handler::Handled) => {},
|
||||
Ok(Handler::CloseSocket) => socket.close(),
|
||||
Ok(Handler::Reset) => should_reset = true,
|
||||
Err(_) => {},
|
||||
}
|
||||
}
|
||||
Ok(SessionInput::Error(e)) => {
|
||||
|
|
|
|||
Loading…
Reference in New Issue