jbqubit/thermostat
1
0
Fork 0
forked from M-Labs/thermostat
Code Issues Pull Requests Releases Wiki Activity

README: Fix command to make firmware BIN (#115)

Browse Source 
Co-authored-by: atse <atse@m-labs.hk>
Co-committed-by: atse <atse@m-labs.hk>
This commit is contained in:
atse 2024-08-07 18:22:48 +08:00 committed by sb10q
parent 136c7a0b52
commit 9d89104f50
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -45,7 +45,7 @@ There are several options for flashing Thermostat. DFU requires only a micro-USB
### dfu-util on Linux ### dfu-util on Linux
* Install the DFU USB tool (dfu-util). * Install the DFU USB tool (dfu-util).
* Convert firmware from ELF to BIN: `arm-none-eabi-objcopy -O binary thermostat thermostat.bin` (you can skip this step if using the BIN from Hydra) * Convert firmware from ELF to BIN: `llvm-objcopy -O binary target/thumbv7em-none-eabihf/release/thermostat thermostat.bin` (you can skip this step if using the BIN from Hydra)
* Connect to the Micro USB connector to Thermostat below the RJ45. * Connect to the Micro USB connector to Thermostat below the RJ45.
* Add jumper to Thermostat v2.0 across 2-pin jumper adjacent to JTAG connector. * Add jumper to Thermostat v2.0 across 2-pin jumper adjacent to JTAG connector.
* Cycle board power to put it in DFU update mode * Cycle board power to put it in DFU update mode