README: add Debugging and Flashing

Fixes Gitea issue #10
This commit is contained in:
Astro 2020-12-07 00:21:09 +01:00
parent 5ddd4d250e
commit 5e8bf0e765
1 changed files with 21 additions and 1 deletions

View File

@ -21,6 +21,26 @@ cargo build --release
The resulting ELF file will be located under `target/thumbv7em-none-eabihf/release/thermostat` The resulting ELF file will be located under `target/thumbv7em-none-eabihf/release/thermostat`
## Debugging
Connect SWDIO/SWCLK/RST/GND to a programmer such as ST-Link v2.1. Run OpenOCD:
```shell
openocd -f interface/stlink-v2-1.cfg -f target/stm32f4x.cfg
```
You may need to power up the programmer before powering the device.
Leave OpenOCD running. Run the GNU debugger:
```shell
gdb target/thumbv7em-none-eabihf/release/thermostat
(gdb) source openocd.gdb
```
## Flashing
```shell
openocd -f interface/stlink-v2-1.cfg -f target/stm32f4x.cfg -c "program target/thumbv7em-none-eabihf/release/thermostat verify reset;exit"
```
## Network ## Network
@ -87,7 +107,7 @@ with logging via semihosting.)
**Caveat:** This logging does not flush its output. Doing so would **Caveat:** This logging does not flush its output. Doing so would
hang indefinitely if the output is not read by the USB host. Therefore hang indefinitely if the output is not read by the USB host. Therefore
output will be truncated once buffers are full. output will be truncated when USB buffers are full.
## Temperature measurement ## Temperature measurement