hartytp
/
ionpak-thermostat
forked from M-Labs/ionpak-thermostat
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

superficial ethmac cleanup

This commit is contained in:
Sebastien Bourdeauducq 2017-08-05 16:24:22 +08:00
parent 648b4da9da
commit e8d6d84ac5
1 changed files with 55 additions and 84 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

139
firmware/src/ethmac.rs
View File

@ -4,17 +4,17 @@ use tm4c129x;
use core::slice;
use smoltcp::Error;
use smoltcp::phy::{DeviceLimits, Device};
use smoltcp::wire::{EthernetAddress};
const EPHY_BMCR: u8 = 0x00; // Ethernet PHY Basic Mode Control
const EPHY_BMSR: u8 = 0x01; // Ethernet PHY Basic Mode Status
const EPHY_ID1: u8 = 0x02; // Ethernet PHY Identifier Register 1
const EPHY_ID2: u8 = 0x03; // Ethernet PHY Identifier Register 2
const EPHY_BMCR: u8 = 0x00; // Ethernet PHY Basic Mode Control
#[allow(dead_code)]
const EPHY_BMSR: u8 = 0x01; // Ethernet PHY Basic Mode Status
const EPHY_ID1: u8 = 0x02; // Ethernet PHY Identifier Register 1
const EPHY_ID2: u8 = 0x03; // Ethernet PHY Identifier Register 2
const EPHY_REGCTL: u8 = 0x0D; // Ethernet PHY Register Control
const EPHY_ADDAR: u8 = 0x0E; // Ethernet PHY Address or Data
const EPHY_REGCTL: u8 = 0x0D; // Ethernet PHY Register Control
const EPHY_ADDAR: u8 = 0x0E; // Ethernet PHY Address or Data
const EPHY_LEDCFG: u8 = 0x25; // Ethernet PHY LED Configuration
const EPHY_LEDCFG: u8 = 0x25; // Ethernet PHY LED Configuration
// Transmit DMA descriptor flags
const EMAC_TDES0_OWN: u32 = 0x80000000; // Indicates that the descriptor is owned by the DMA
@ -60,8 +60,8 @@ static mut EMAC_DATA: EmacData = EmacData {
rx_pkt_buf: [0; ETH_RX_BUFFER_COUNT * ETH_RX_BUFFER_SIZE],
};
pub fn delay(d: i32) {
for x in 0..d {
fn delay(d: u32) {
for _ in 0..d {
unsafe {
asm!("
NOP
@ -71,55 +71,59 @@ pub fn delay(d: i32) {
}
fn phy_read(reg_addr: u8) -> u16 {
unsafe {
let emac0 = tm4c129x::EMAC0.get();
cortex_m::interrupt::free(|cs| {
let emac0 = tm4c129x::EMAC0.borrow(cs);
// Make sure the MII is idle
while (*emac0).miiaddr.read().miib().bit() {};
while emac0.miiaddr.read().miib().bit() {};
// Tell the MAC to read the given PHY register
(*emac0).miiaddr.write(|w| {
w.cr()._100_150()
.mii().bits(reg_addr & 0x1F)
.miib().bit(true)
} );
unsafe {
emac0.miiaddr.write(|w| {
w.cr()._100_150()
.mii().bits(reg_addr & 0x1F)
.miib().bit(true)
});
}
// Wait for the read to complete
while (*emac0).miiaddr.read().miib().bit() {};
while emac0.miiaddr.read().miib().bit() {};
(*emac0).miidata.read().data().bits()
}
emac0.miidata.read().data().bits()
})
}
fn phy_write(reg_addr: u8, reg_data: u16) {
unsafe {
let emac0 = tm4c129x::EMAC0.get();
cortex_m::interrupt::free(|cs| {
let emac0 = tm4c129x::EMAC0.borrow(cs);
// Make sure the MII is idle
while (*emac0).miiaddr.read().miib().bit() {};
while emac0.miiaddr.read().miib().bit() {};
(*emac0).miidata.write(|w| {
w.data().bits(reg_data)
} );
unsafe {
emac0.miidata.write(|w| {
w.data().bits(reg_data)
});
// Tell the MAC to write the given PHY register
(*emac0).miiaddr.write(|w| {
w.cr()._100_150()
.mii().bits(reg_addr & 0x1F)
.miiw().bit(true)
.miib().bit(true)
} );
emac0.miiaddr.write(|w| {
w.cr()._100_150()
.mii().bits(reg_addr & 0x1F)
.miiw().bit(true)
.miib().bit(true)
});
}
// Wait for the read to complete
while (*emac0).miiaddr.read().miib().bit() {};
}
while emac0.miiaddr.read().miib().bit() {};
})
}
// Writes a value to an extended PHY register in MMD address space
fn phy_write_ext(reg_addr: u8, reg_data: u16) {
phy_write(EPHY_REGCTL, 0x001F); // set address (datasheet page 1612)
phy_write(EPHY_REGCTL, 0x001F); // set address (datasheet page 1612)
phy_write(EPHY_ADDAR, reg_addr as u16);
phy_write(EPHY_REGCTL, 0x401F); // set write mode
phy_write(EPHY_REGCTL, 0x401F); // set write mode
phy_write(EPHY_ADDAR, reg_data);
}
@ -149,7 +153,7 @@ pub fn init(mac_addr: [u8; 6]) {
emac0.miiaddr.write(|w| w.cr()._100_150()); // Set the MII CSR clock speed.
// Checking PHY
if (phy_read(EPHY_ID1) != 0x2000) | (phy_read(EPHY_ID2) != 0xA221) { // TM4C1294 PHY IDs
if (phy_read(EPHY_ID1) != 0x2000) | (phy_read(EPHY_ID2) != 0xA221) {
panic!("PHY ID error!");
}
@ -158,10 +162,10 @@ pub fn init(mac_addr: [u8; 6]) {
while 1 == (phy_read(EPHY_BMCR) & 1) {}; // Wait for the reset to be completed
// Configure PHY LEDs
phy_write_ext(EPHY_LEDCFG, 0x0008); //LED0 Link OK/Blink on TX/RX Activit
phy_write_ext(EPHY_LEDCFG, 0x0008); // LED0 Link OK/Blink on TX/RX Activity
// Tell the PHY to start an auto-negotiation cycle
phy_write(EPHY_BMCR, 0b00010010_00000000); //ANEN and RESTARTAN
phy_write(EPHY_BMCR, 0b00010010_00000000); // ANEN and RESTARTAN
// Set the DMA operation mode
emac0.dmaopmode.write(|w|
@ -169,7 +173,7 @@ pub fn init(mac_addr: [u8; 6]) {
.tsf().bit(true) // Transmit Store and Forward
.ttc()._64() // Transmit Threshold Control
.rtc()._64() // Receive Threshold Control
);
);
// Set the bus mode register.
emac0.dmabusmod.write(|w| unsafe {
@ -206,7 +210,7 @@ pub fn init(mac_addr: [u8; 6]) {
// Set the low 4 bytes of the MAC address
emac0.addr0l.write(|w| unsafe {
w.addrlo().bits(mac_addr[0] as u32 | ((mac_addr[1] as u32) << 8) | ((mac_addr[2] as u32) << 16) | ((mac_addr[3] as u32) << 24))
} );
});
// Set MAC filtering options (?)
emac0.framefltr.write(|w|
@ -216,8 +220,8 @@ pub fn init(mac_addr: [u8; 6]) {
);
// Initialize hash table
emac0.hashtbll.write(|w| unsafe { w.htl().bits(0 as u32)});
emac0.hashtblh.write(|w| unsafe { w.hth().bits(0 as u32)});
emac0.hashtbll.write(|w| unsafe { w.htl().bits(0)});
emac0.hashtblh.write(|w| unsafe { w.hth().bits(0)});
emac0.flowctl.write(|w| unsafe { w.bits(0)}); // Disable flow control ???
@ -298,45 +302,13 @@ pub fn init(mac_addr: [u8; 6]) {
});
}
pub fn info() {
unsafe {
static mut BMSR1: u16 = 0;
static mut R1: u32 = 0;
// Display EMAC status(es) if need
let emac0 = tm4c129x::EMAC0.get();
// let r = (*emac0).dmaris.read().bits();
let r = 0;
if R1 != r {
println!("R=0x{:08x}", r);
}
R1 = r;
// Display PHY/media status
let bmsr = phy_read(EPHY_BMSR);
if BMSR1 != bmsr {
println!("PHY BMSR=0x{:04x}", bmsr);
}
BMSR1 = bmsr;
// Display packets count
let rxp = EMAC_DATA.rx_counter;
EMAC_DATA.rx_counter = 0;
let txp = EMAC_DATA.tx_counter;
EMAC_DATA.tx_counter = 0;
if (0 != rxp) || (0 != txp) {
println!("RX_PKT={} TX_PKT={}", rxp, txp);
}
}
}
fn release_rx_buf() {
unsafe {
EMAC_DATA.rx_cur_desc += ETH_DESC_U32_SIZE;
if EMAC_DATA.rx_cur_desc >= (ETH_RX_BUFFER_COUNT * ETH_DESC_U32_SIZE) {
EMAC_DATA.rx_cur_desc = 0;
}
EMAC_DATA.rx_desc_buf[EMAC_DATA.rx_cur_desc + 0] = EMAC_RDES0_OWN; // release descriptor
EMAC_DATA.rx_desc_buf[EMAC_DATA.rx_cur_desc + 0] = EMAC_RDES0_OWN; // release descriptor
}
}
@ -355,7 +327,7 @@ impl Device for EthernetDevice {
fn receive(&mut self, _timestamp: u64) -> Result<Self::RxBuffer, Error> {
unsafe {
if 0 == (EMAC_DATA.rx_desc_buf[EMAC_DATA.rx_cur_desc + 0] & EMAC_RDES0_OWN) {
if (EMAC_DATA.rx_desc_buf[EMAC_DATA.rx_cur_desc + 0] & EMAC_RDES0_OWN) == 0 {
// check for the whole packet in the buffer and no any error
if (EMAC_RDES0_FS | EMAC_RDES0_LS) == EMAC_DATA.rx_desc_buf[EMAC_DATA.rx_cur_desc + 0] & (EMAC_RDES0_FS | EMAC_RDES0_LS | EMAC_RDES0_ES) {
// Retrieve the length of the frame
@ -363,14 +335,14 @@ impl Device for EthernetDevice {
// Limit the number of data to read
if n > ETH_RX_BUFFER_SIZE as u32 { n = ETH_RX_BUFFER_SIZE as u32; }
Ok(RxBuffer(slice::from_raw_parts(EMAC_DATA.rx_desc_buf[EMAC_DATA.rx_cur_desc + 2] as * mut u8,
n as usize)))
n as usize)))
} else {
// Ignore invalid frame
release_rx_buf();
Err(Error::Exhausted)
}
} else {
Err(Error::Exhausted) // currently no bufferes to process
Err(Error::Exhausted) // currently no buffers to process
}
}
}
@ -378,15 +350,14 @@ impl Device for EthernetDevice {
fn transmit(&mut self, _timestamp: u64, length: usize) -> Result<Self::TxBuffer, Error> {
unsafe {
// Check if the TX DMA buffer released
if 0 == (EMAC_DATA.tx_desc_buf[EMAC_DATA.tx_cur_desc + 0] & EMAC_TDES0_OWN) {
if (EMAC_DATA.tx_desc_buf[EMAC_DATA.tx_cur_desc + 0] & EMAC_TDES0_OWN) == 0 {
// Write the number of bytes to send
EMAC_DATA.tx_desc_buf[EMAC_DATA.tx_cur_desc + 1] = length as u32 & EMAC_TDES1_TBS1;
Ok(TxBuffer(slice::from_raw_parts_mut(EMAC_DATA.tx_desc_buf[EMAC_DATA.tx_cur_desc + 2] as * mut u8,
ETH_TX_BUFFER_SIZE)))
ETH_TX_BUFFER_SIZE)))
} else {
// to do if need: Instruct the DMA to poll the receive descriptor list
Err(Error::Exhausted)
}
}
@ -440,7 +411,7 @@ impl Drop for TxBuffer {
}
EMAC_DATA.tx_cur_desc = tx_next_desc;
EMAC_DATA.tx_counter += 1; // Increment RX statistics
EMAC_DATA.tx_counter += 1;
}
}
}