nix-scripts/nixbld-etc-nixos/configuration.nix

575 lines
17 KiB
Nix
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running nixos-help).
{ config, pkgs, ... }:
let
netifWan = "enp0s31f6";
netifLan = "enp3s0";
netifWifi = "wlp4s0";
netifSit = "henet0";
hydraWwwOutputs = "/var/www/hydra-outputs";
in
{
imports =
[
./hardware-configuration.nix
./homu/nixos-module.nix
./backup-module.nix
(builtins.fetchTarball {
url = "https://gitlab.com/simple-nixos-mailserver/nixos-mailserver/-/archive/v2.2.1/nixos-mailserver-v2.2.1.tar.gz";
sha256 = "03d49v8qnid9g9rha0wg2z6vic06mhp0b049s3whccn1axvs2zzx";
})
];
# Use the systemd-boot EFI boot loader.
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
security.apparmor.enable = true;
security.pam.yubico = {
enable = true;
id = "49094";
control = "required";
};
networking = {
hostName = "nixbld";
firewall = {
allowedTCPPorts = [ 80 443 ];
allowedUDPPorts = [ 53 67 ];
trustedInterfaces = [ netifLan ];
};
interfaces."${netifLan}" = {
ipv4.addresses = [{
address = "192.168.1.1";
prefixLength = 24;
}];
ipv6.addresses = [{
address = "2001:470:f821:1::";
prefixLength = 64;
}];
};
interfaces."${netifWifi}" = {
ipv4.addresses = [{
address = "192.168.12.1";
prefixLength = 24;
}];
ipv6.addresses = [{
address = "2001:470:f821:2::";
prefixLength = 64;
}];
};
nat = {
enable = true;
externalInterface = netifWan;
internalInterfaces = [ netifLan netifWifi ];
extraCommands = ''
iptables -w -N block-lan-from-wifi
iptables -w -A block-lan-from-wifi -i ${netifLan} -o ${netifWifi} -j DROP
iptables -w -A block-lan-from-wifi -i ${netifWifi} -o ${netifLan} -j DROP
iptables -w -A FORWARD -j block-lan-from-wifi
'';
extraStopCommands = ''
iptables -w -D FORWARD -j block-lan-from-wifi 2>/dev/null|| true
iptables -w -F block-lan-from-wifi 2>/dev/null|| true
iptables -w -X block-lan-from-wifi 2>/dev/null|| true
'';
};
sits."${netifSit}" = {
dev = netifWan;
remote = "216.218.221.6";
local = "42.200.147.171";
ttl = 255;
};
interfaces."${netifSit}".ipv6 = {
addresses = [{ address = "2001:470:18:629::2"; prefixLength = 64; }];
routes = [{ address = "::"; prefixLength = 0; }];
};
};
boot.kernel.sysctl."net.ipv6.conf.all.forwarding" = "1";
boot.kernel.sysctl."net.ipv6.conf.default.forwarding" = "1";
services.hostapd = {
enable = true;
interface = netifWifi;
hwMode = "g";
ssid = "M-Labs";
wpaPassphrase = (import /etc/nixos/secret/wifi_password.nix);
};
services.dnsmasq = {
enable = true;
extraConfig = ''
interface=${netifLan}
interface=${netifWifi}
bind-interfaces
dhcp-range=interface:${netifLan},192.168.1.81,192.168.1.254,24h
dhcp-range=interface:${netifWifi},192.168.12.10,192.168.12.254,24h
enable-ra
dhcp-range=interface:${netifLan},::,constructor:${netifLan},ra-names
dhcp-range=interface:${netifWifi},::,constructor:${netifWifi},ra-only
# Default IP addresses for ARTIQ boards
address=/thermostat/192.168.1.26
address=/kc705/192.168.1.50
address=/zc706/192.168.1.51
address=/sayma/192.168.1.60
address=/kasli/192.168.1.70
# uTCA MCH from NAT
address=/tschernobyl/192.168.1.80
'';
};
# Select internationalisation properties.
i18n = {
consoleFont = "Lat2-Terminus16";
consoleKeyMap = "de";
defaultLocale = "en_US.UTF-8";
};
# Set your time zone.
time.timeZone = "Asia/Hong_Kong";
# List packages installed in system profile. To search, run:
# $ nix search wget
environment.systemPackages = with pkgs; [
wget vim git file lm_sensors acpi pciutils psmisc xc3sprog openocd gdb telnet whois zip unzip nixops
irssi tmux adoptopenjdk-openj9-bin-11 tigervnc xorg.xauth icewm xterm xorg.xsetroot usbutils imagemagick jq
];
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
# programs.mtr.enable = true;
# programs.gnupg.agent = { enable = true; enableSSHSupport = true; };
# List services that you want to enable:
services.apcupsd.enable = true;
services.apcupsd.configText = ''
UPSTYPE usb
NISIP 127.0.0.1
BATTERYLEVEL 10
MINUTES 5
'';
# Enable the OpenSSH daemon.
services.openssh.enable = true;
services.openssh.forwardX11 = true;
programs.mosh.enable = true;
programs.fish.enable = true;
# Enable CUPS to print documents.
services.avahi.enable = true;
services.avahi.interfaces = [ netifLan ];
services.avahi.publish.enable = true;
services.avahi.publish.userServices = true;
nixpkgs.config.allowUnfree = true;
services.printing.enable = true;
services.printing.drivers = [ pkgs.hplipWithPlugin ];
services.printing.browsing = true;
services.printing.listenAddresses = [ "*:631" ];
services.printing.defaultShared = true;
hardware.sane.enable = true;
hardware.sane.extraBackends = [ pkgs.hplipWithPlugin ];
users.extraGroups.plugdev = { };
users.extraUsers.sb = {
isNormalUser = true;
extraGroups = ["wheel" "plugdev" "dialout" "lp" "scanner"];
shell = pkgs.fish;
};
users.extraUsers.rj = {
isNormalUser = true;
extraGroups = ["wheel" "plugdev" "dialout"];
};
users.extraUsers.astro = {
isNormalUser = true;
extraGroups = ["plugdev" "dialout"];
};
users.extraUsers.whitequark = {
isNormalUser = true;
extraGroups = ["plugdev" "dialout"];
};
users.extraUsers.konstantin = {
isNormalUser = true;
extraGroups = ["plugdev" "dialout"];
};
users.extraUsers.steinb = {
isNormalUser = true;
extraGroups = ["plugdev" "dialout"];
};
users.extraUsers.nix = {
isNormalUser = true;
};
security.sudo.wheelNeedsPassword = false;
security.hideProcessInformation = true;
boot.kernel.sysctl."kernel.dmesg_restrict" = true;
services.udev.packages = [ pkgs.openocd pkgs.sane-backends ];
services.udev.extraRules = ''
ACTION=="add", SUBSYSTEM=="tty", \
ENV{ID_SERIAL}=="FTDI_Quad_RS232-HS", \
ENV{ID_PATH}=="pci-0000:00:14.0-usb-0:5:1.1", \
SYMLINK+="ttyUSB_sayma-1_0"
ACTION=="add", SUBSYSTEM=="tty", \
ENV{ID_SERIAL}=="FTDI_Quad_RS232-HS", \
ENV{ID_PATH}=="pci-0000:00:14.0-usb-0:5:1.2", \
SYMLINK+="ttyUSB_sayma-1_1"
ACTION=="add", SUBSYSTEM=="tty", \
ENV{ID_SERIAL}=="FTDI_Quad_RS232-HS", \
ENV{ID_PATH}=="pci-0000:00:14.0-usb-0:1:1.2", \
SYMLINK+="ttyUSB_kasli-n1"
'';
nix.distributedBuilds = true;
nix.buildMachines = [
{
hostName = "localhost";
maxJobs = 4;
system = "x86_64-linux";
supportedFeatures = ["big-parallel"];
}
{
hostName = "rpi-3";
sshUser = "nix";
sshKey = "/etc/nixos/secret/nix_id_rsa";
maxJobs = 1;
system = "aarch64-linux";
}
];
services.hydra = {
enable = true;
useSubstitutes = true;
hydraURL = "https://nixbld.m-labs.hk";
notificationSender = "hydra@m-labs.hk";
minimumDiskFree = 15; # in GB
minimumDiskFreeEvaluator = 1;
extraConfig =
''
binary_cache_secret_key_file = /etc/nixos/secret/nixbld.m-labs.hk-1
max_output_size = 10000000000
<runcommand>
job = web:web:web
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/web
</runcommand>
<runcommand>
job = artiq:full:artiq-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-html-beta
</runcommand>
<runcommand>
job = artiq:full:artiq-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-latexpdf-beta
</runcommand>
<runcommand>
job = artiq:full:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel-beta
</runcommand>
'';
};
systemd.services.hydra-www-outputs-init = {
description = "Set up a hydra-owned directory for build outputs";
wantedBy = [ "multi-user.target" ];
requiredBy = [ "hydra-queue-runner.service" ];
before = [ "hydra-queue-runner.service" ];
serviceConfig = {
Type = "oneshot";
ExecStart = [ "${pkgs.coreutils}/bin/mkdir -p ${hydraWwwOutputs}" "${pkgs.coreutils}/bin/chown hydra-queue-runner:hydra ${hydraWwwOutputs}" ];
};
};
nix.extraOptions = ''
secret-key-files = /etc/nixos/secret/nixbld.m-labs.hk-1
'';
nix.sandboxPaths = ["/opt"];
services.munin-node.enable = true;
services.munin-cron = {
enable = true;
hosts = ''
[${config.networking.hostName}]
address localhost
'';
};
services.mlabs-backup.enable = true;
services.gitea = {
enable = true;
httpPort = 3001;
rootUrl = "https://git.m-labs.hk/";
appName = "M-Labs Git";
cookieSecure = true;
disableRegistration = true;
extraConfig =
''
[attachment]
ALLOWED_TYPES = */*
'';
};
services.mattermost = {
enable = true;
siteUrl = "https://chat.m-labs.hk/";
mutableConfig = true;
};
services.matterbridge = {
enable = true;
configPath = "/etc/nixos/secret/matterbridge.toml";
};
nixpkgs.config.packageOverrides = super: let self = super.pkgs; in {
hydra = super.hydra.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./hydra-conda.patch ./hydra-retry.patch ];
hydraPath = oa.hydraPath + ":" + super.lib.makeBinPath [ super.jq ];
});
matterbridge = super.matterbridge.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./matterbridge-disable-github.patch ];
});
nixops = super.nixops.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./nixops-665.patch ];
});
};
security.acme.certs = {
"nixbld.m-labs.hk" = {
webroot = "/var/lib/acme/acme-challenge";
extraDomains = {
"m-labs.hk" = null;
"www.m-labs.hk" = null;
"conda.m-labs.hk" = null;
"lab.m-labs.hk" = null;
"git.m-labs.hk" = null;
"chat.m-labs.hk" = null;
"hooks.m-labs.hk" = null;
"forum.m-labs.hk" = null;
"perso.m-labs.hk" = null;
"openhardware.hk" = null;
"git.openhardware.hk" = null;
};
};
};
services.nginx = {
enable = true;
recommendedProxySettings = true;
recommendedGzipSettings = true;
virtualHosts = let
mainWebsite = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "${hydraWwwOutputs}/web";
extraConfig = ''
error_page 404 /404.html;
'';
locations."^~ /fonts/".extraConfig = ''
expires 60d;
'';
locations."^~ /js/".extraConfig = ''
expires 60d;
'';
locations."/MathJax/" = {
alias = "/var/www/MathJax/";
extraConfig = ''
expires 60d;
'';
};
# legacy URLs, redirect to avoid breaking people's bookmarks
locations."/gateware.html".extraConfig = ''
return 301 /gateware/migen/;
'';
locations."/migen".extraConfig = ''
return 301 /gateware/migen/;
'';
locations."/artiq".extraConfig = ''
return 301 /experiment-control/artiq/;
'';
locations."/artiq/resources.html".extraConfig = ''
return 301 /experiment-control/resources/;
'';
# autogenerated ARTIQ manuals
locations."/artiq/manual-beta/" = {
alias = "${hydraWwwOutputs}/artiq-manual-html-beta/share/doc/artiq-manual/html/";
};
locations."=/artiq/manual-beta.pdf" = {
alias = "${hydraWwwOutputs}/artiq-manual-latexpdf-beta/share/doc/artiq-manual/ARTIQ.pdf";
};
# legacy content
locations."/migen/manual/" = {
alias = "/var/www/m-labs.hk.old/migen/manual/";
};
locations."/artiq/manual/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-4/";
};
locations."/artiq/manual-release-4/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-4/";
};
locations."/artiq/manual-release-3/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-3/";
};
};
in {
"m-labs.hk" = mainWebsite;
"www.m-labs.hk" = mainWebsite;
"lab.m-labs.hk" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/munin/".alias = "/var/www/munin/";
locations."/munin".extraConfig = ''
auth_basic "Munin";
auth_basic_user_file /etc/nixos/secret/muninpasswd;
'';
locations."/homu/".proxyPass = "http://127.0.0.1:54856/";
};
"nixbld.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:3000";
};
"conda.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/artiq-beta/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel-beta/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
};
"git.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:3001";
extraConfig = ''
client_max_body_size 300M;
'';
};
"chat.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:8065";
locations."~ /api/v[0-9]+/(users/)?websocket$".proxyPass = "http://127.0.0.1:8065";
locations."~ /api/v[0-9]+/(users/)?websocket$".proxyWebsockets = true;
};
"hooks.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".extraConfig = ''
include ${pkgs.nginx}/conf/uwsgi_params;
uwsgi_pass unix:${config.services.uwsgi.runDir}/uwsgi.sock;
'';
};
"forum.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "/var/www/flarum/public";
locations."~ \.php$".extraConfig = ''
fastcgi_pass unix:${config.services.phpfpm.pools.flarum.socket};
fastcgi_index index.php;
'';
extraConfig = ''
index index.php;
include /var/www/flarum/.nginx.conf;
'';
};
"perso.m-labs.hk" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "/var/www/perso";
};
"git.openhardware.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:3002";
extraConfig = ''
client_max_body_size 300M;
'';
};
};
};
services.uwsgi = {
enable = true;
plugins = [ "python3" ];
instance = {
type = "emperor";
vassals = {
mattermostgithub = import ./mattermost-github-integration/uwsgi-config.nix { inherit config pkgs; };
};
};
};
services.mysql = {
enable = true;
package = pkgs.mariadb;
};
services.phpfpm.pools.flarum = {
user = "nobody";
settings = {
"listen.owner" = "nginx";
"listen.group" = "nginx";
"listen.mode" = "0600";
"pm" = "dynamic";
"pm.max_children" = 5;
"pm.start_servers" = 2;
"pm.min_spare_servers" = 1;
"pm.max_spare_servers" = 3;
"pm.max_requests" = 500;
};
};
services.homu = {
enable = true;
config = "/etc/nixos/secret/homu.toml";
};
mailserver = {
enable = true;
localDnsResolver = false; # conflicts with dnsmasq
# Some mail servers do reverse DNS lookups to filter spam.
# Getting a proper reverse DNS record from ISP is difficult, so use whatever already exists.
fqdn = "42-200-147-171.static.imsbiz.com";
domains = [ "nmigen.org" ];
loginAccounts = (import /etc/nixos/secret/email_accounts.nix);
certificateScheme = 3;
};
security.acme.certs."${config.mailserver.fqdn}".extraDomains = {
"mail.nmigen.org" = null;
};
containers.openhardwarehk = {
autoStart = true;
config =
{ config, pkgs, ... }:
{
services.gitea = {
enable = true;
httpPort = 3002;
rootUrl = "https://git.openhardware.hk/";
appName = "Open Hardware HK";
cookieSecure = true;
disableRegistration = true;
extraConfig =
''
[attachment]
ALLOWED_TYPES = */*
'';
};
};
};
# This value determines the NixOS release with which your system is to be
# compatible, in order to avoid breaking some software such as database
# servers. You should change this only after NixOS release notes say you
# should.
system.stateVersion = "18.09"; # Did you read the comment?
}