it-infra/nixops/rpi-server.nix

{ host, rpi4 }:

{ config, pkgs, ... }:
{
  deployment.targetHost = host;
  nix.nixPath = [ "nixpkgs=${pkgs.path}" ];
  programs.command-not-found.dbPath = "${pkgs.path}/programs.sqlite";
  nixpkgs.system = "aarch64-linux";

  boot.loader.grub.enable = false;
  boot.loader.generic-extlinux-compatible.enable = true;
  boot.loader.raspberryPi = pkgs.lib.mkIf rpi4 {
    enable = true;
    version = 4;
    firmwareConfig = ''
      dtparam=audio=on
    '';
  };
  boot.kernelPackages = if rpi4 then pkgs.linuxPackages_rpi4 else pkgs.linuxPackages_rpi3;
  hardware.deviceTree.enable = true;
  hardware.deviceTree.base = pkgs.device-tree_rpi;
  hardware.deviceTree.overlays = [ "${pkgs.device-tree_rpi.overlays}/rpi-poe.dtbo" ];

  fileSystems = {
    "/" = {
      device = "/dev/disk/by-label/NIXOS_SD";
      fsType = "ext4";
    };
  };

  services.openssh.enable = true;
  services.openssh.passwordAuthentication = false;
  services.openssh.extraConfig =
    ''
    StreamLocalBindUnlink yes
    '';
  programs.mosh.enable = true;

  networking.hostName = host;
  time.timeZone = "Asia/Hong_Kong";

  hardware.enableRedistributableFirmware = true;
  services.hostapd = {
    enable        = true;
    interface     = "wlan0";
    hwMode        = "g";
    ssid          = "M-Labs-ext";
    wpaPassphrase = (import /etc/nixos/secret/wifi_ext_password.nix);
    extraConfig   = ''
      ieee80211d=1
      country_code=HK
      ieee80211n=1
      wmm_enabled=1
      auth_algs=1
      wpa_key_mgmt=WPA-PSK
      rsn_pairwise=CCMP
    '';
  };
  networking.interfaces.eth0 = {
    ipv4.addresses = [{
      address = "192.168.1.30";
      prefixLength = 24;
    }];
    ipv6.addresses = [{
      address = "2001:470:f821:1:dea6:32ff:fe95:2fcf";
      prefixLength = 64;
    }];
    ipv4.routes = [{
      address = "0.0.0.0";
      prefixLength = 0;
      via = "192.168.1.1";
    }];
    ipv6.routes = [{
      address = "::";
      prefixLength = 0;
      via = "fe80::523e:aaff:fe0c:e49d";
    }];
  };
  networking.interfaces.wlan0 = {
    ipv4.addresses = [{
      address = "192.168.13.1";
      prefixLength = 24;
    }];
    ipv6.addresses = [{
      address = "2001:470:f821:3::";
      prefixLength = 64;
    }];
  };
  services.dnsmasq = {
    enable = true;
    servers = ["192.168.1.1#53"];
    extraConfig = ''
      interface=wlan0
      bind-interfaces
      dhcp-range=192.168.13.10,192.168.13.254,24h
      enable-ra
      dhcp-range=::,constructor:wlan0,ra-only
      no-resolv
    '';
  };
  boot.kernel.sysctl."net.ipv4.ip_forward" = 1;
  boot.kernel.sysctl."net.ipv6.conf.all.forwarding" = "1";
  boot.kernel.sysctl."net.ipv6.conf.default.forwarding" = "1";

  users.mutableUsers = false;
  users.defaultUserShell = pkgs.fish;
  users.extraUsers = import ./common-users.nix { inherit pkgs; };
  security.sudo.wheelNeedsPassword = false;

  documentation.enable = false;
  environment.systemPackages = with pkgs; [
    psmisc wget vim git sshfs usbutils lm_sensors file telnet mosh tmux
  ];
  programs.fish.enable = true;

  services.avahi.enable = true;
  services.avahi.publish.enable = true;
  services.avahi.publish.userServices = true;
  services.printing.enable = true;
  services.printing.drivers = [ pkgs.hplip ];
  services.printing.browsing = true;
  services.printing.listenAddresses = [ "192.168.1.30:631" "192.168.13.1:631" ];
  services.printing.defaultShared = true;
  hardware.sane.enable = true;
  hardware.sane.extraBackends = [ pkgs.hplip ];

  sound.enable = true;
  hardware.pulseaudio.enable = true;
  hardware.pulseaudio.systemWide = true;
  hardware.pulseaudio.tcp.enable = true;
  hardware.pulseaudio.tcp.anonymousClients.allowedIpRanges = ["192.168.1.0/24"];

  networking.firewall.allowedTCPPorts = [ 631 4713 ];
  networking.firewall.interfaces.wlan0.allowedUDPPorts = [ 53 67 ];

  nix.binaryCachePublicKeys = ["nixbld.m-labs.hk-1:5aSRVA5b320xbNvu30tqxVPXpld73bhtOeH6uAjRyHc="];
  nix.binaryCaches = ["https://cache.nixos.org" "https://nixbld.m-labs.hk"];
  nix.trustedUsers = ["root" "nix"];
}