#!/bin/sh

# Simultaneously, start testing RP's network connectivity, while
# powering on MCH and RP using ~/power_strip/ scripts
# Display power-on time
TIMESTAMP_PRETTY=$(date '+%Y-%m-%d %H:%M:%S')
echo "MCH & RP powered on at $TIMESTAMP_PRETTY."
# Test RP network connectivity
# NOTE: Change $RP_HOST inside `rp_ping_test` for your own setup!
./rp_ping_test &
# Power on MCH 
./mch_start &
# Wait 2 minutes before measurement
sleep 120

# Get and plot Sayma data
# (Assumption: numpy, matplotlib and scipy have been installed on local)
# (Assumption: directory ./creotech-raw exists)
# NOTE: Change the RP hostname and LV/HV arguments according to
# which two channels you are measuring!
./get_and_plot_sayma_data creotech-raw creotech-1 1 creotech-1 2 creotech-1:LV,LV &
# Wait 1 minute before powering off MCH and RP
sleep 60

# Issue shutdown on RP, and wait until RP is disconnected
# NOTE: Change $RP_HOST, $RP_USER & $RP_KEY inside
# `rp_shutdown` for your own setup!
./rp_shutdown &
# Wait 30 seconds
sleep 30

# Simultaneously power off MCH and RP
# Display power-off time
TIMESTAMP_PRETTY=$(date '+%Y-%m-%d %H:%M:%S')
echo "MCH & RP powered off at $TIMESTAMP_PRETTY."
# Power off MCH
./mch_stop