From 86e441a487b1769476f406ee0f3777a56d65c9fd Mon Sep 17 00:00:00 2001 From: Florian Agbuya Date: Wed, 28 Aug 2024 16:13:21 +0800 Subject: [PATCH] apply original dac script --- fast-servo/pyfastservo/dac.py | 277 +++++++++++++++++++++-------- fast-servo/pyfastservo/loopback.py | 2 +- 2 files changed, 206 insertions(+), 73 deletions(-) diff --git a/fast-servo/pyfastservo/dac.py b/fast-servo/pyfastservo/dac.py index cb9d5a7..b6029c9 100644 --- a/fast-servo/pyfastservo/dac.py +++ b/fast-servo/pyfastservo/dac.py @@ -1,24 +1,11 @@ -# This file is part of Fast Servo Software Package. -# -# Copyright (C) 2023 Jakub Matyas -# Warsaw University of Technology -# SPDX-License-Identifier: GPL-3.0-or-later -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - +import mmap +import os +import logging import time +logging.basicConfig(level=logging.INFO) +logger = logging.getLogger(__name__) + import spidev from pyfastservo.common import ( CH0_HIGH_WORD_ADDR, @@ -28,13 +15,12 @@ from pyfastservo.common import ( CTRL_ADDR, MAP_MASK, PAGESIZE, - write_to_memory, - read_from_memory ) # /dev/spidev2.0 <=> spidev. MAIN_DAC_BUS = 2 MAIN_DAC_DEVICE = 0 + DAC_VERSION = 0x0A @@ -46,40 +32,190 @@ def spi_read(spi, address): return rx_buffer[1] def hard_reset(spi): - spi_write(spi, 0x00, 0x20) # Software reset + spi_write(spi, 0x00, 0x10) # Software reset spi_write(spi, 0x00, 0x00) # Release software reset spi_read(spi, 0x00) # Read reset address (necessary for reset to take effect) def check_version(spi): version = spi_read(spi, 0x1F) - print(f"DAC version: 0x{version:02X}") - return version == DAC_VERSION + if version == DAC_VERSION: + print(f"Verified DAC version: 0x{version:02X}") + else: + print(f"Unrecognized device version: 0x{version:02X}") -def configure_dac(spi): - power_down_reg = spi_read(spi, 0x01) - spi_write(spi, 0x01, power_down_reg & ~(1 << 0)) # Clear EXTREF bit for internal reference - spi_write(spi, 0x0D, 0x00) # Set RREF to 10 kΩ for 1.0V reference - spi_write(spi, 0x04, 0xA0) # Enable on-chip IRSET (1.6 kΩ for 20mA output) - spi_write(spi, 0x07, 0xA0) # Enable on-chip QRSET (1.6 kΩ for 20mA output) - spi_write(spi, 0x05, 0x00) # Disable internal IRCML - spi_write(spi, 0x08, 0x00) # Disable internal QRCML - spi_write(spi, 0x02, 0xB4) # Enable 2's complement, LVDS interface, 4 LVDS lanes +def set_data_control_and_output_mode(spi, mode='differential'): + try: + current_reg = spi_read(spi, 0x02) + logger.info(f"Current data control register value: 0x{current_reg:02X}") -def dac_self_calibration(spi): - spi_write(spi, 0x12, 0x00) # Reset calibration status - spi_write(spi, 0x0E, 0x08) # Enable calibration clock, default divide ratio - spi_write(spi, 0x0E, 0x38) # CALSELI = 1, CALSELQ = 1, CALCLK = 1 - spi_write(spi, 0x12, 0x10) # Set CALEN bit + new_reg = 0xB4 - while True: - status = spi_read(spi, 0x0F) - if status & 0xC0 == 0xC0: # Both CALSTATI and CALSTATQ are 1 + if mode == 'differential': + new_reg &= ~0x03 + elif mode == 'single_ended': + new_reg = (new_reg & ~0x01) | 0x02 + else: + logger.error(f"Invalid output mode: {mode}") + return + + spi_write(spi, 0x02, new_reg) + + verify_reg = spi_read(spi, 0x02) + if verify_reg == new_reg: + logger.info(f"Data control set and output mode successfully set to {mode}") + logger.info(f"New data control register value: 0x{verify_reg:02X}") + else: + logger.error(f"Failed to set data control and output mode. Expected: 0x{new_reg:02X}, Got: 0x{verify_reg:02X}") + except Exception as e: + logger.error(f"Error setting data control and output mode: {e}") + + +def wait_for_clock_sync(spi): + max_attempts = 10 + for attempt in range(max_attempts): + clkmode = spi_read(spi, 0x14) + if not clkmode & 0x10: + print(f"Clock synchronized after {attempt + 1} attempts") break - time.sleep(0.01) + if attempt == max_attempts - 1: + print("Warning: Clock synchronization not achieved") + time.sleep(0.001) + + +def enable_dac_outputs(spi): + try: + # Read current power-down register value + power_down_reg = spi_read(spi, 0x01) + logger.info(f"Current power-down register value: 0x{power_down_reg:02X}") + + if not (power_down_reg & ((1 << 4) | (1 << 3))): + logger.info("DAC outputs are already enabled") + return + + new_power_down_reg = power_down_reg & ~((1 << 4) | (1 << 3)) + spi_write(spi, 0x01, new_power_down_reg) + + # Verify the write operation + verify_power_down_reg = spi_read(spi, 0x01) + if verify_power_down_reg == new_power_down_reg: + logger.info("DAC outputs successfully enabled") + else: + logger.error(f"Failed to enable DAC outputs. Expected: 0x{new_power_down_reg:02X}, Got: 0x{verify_power_down_reg:02X}") + except Exception as e: + logger.error(f"Error enabling DAC outputs: {e}") + + +def set_dac_constant_output(value=0xFFFF): + try: + max_value = 0x3FFF # 14-bit maximum (2^14 - 1) + value = min(value, max_value) + + # Split the value into high and low words + low_word_value = value & 0xFF + high_word_value = (value >> 8) & 0x3F + + # Write to Channel 0 + write_to_memory(CH0_HIGH_WORD_ADDR, high_word_value) + write_to_memory(CH0_LOW_WORD_ADDR, low_word_value) + + # Write to Channel 1 + write_to_memory(CH1_HIGH_WORD_ADDR, high_word_value) + write_to_memory(CH1_LOW_WORD_ADDR, low_word_value) + + logger.info(f"DAC outputs set to constant value: 0x{value:04X}") + logger.info("Please verify the output using an oscilloscope") + + except Exception as e: + logger.error(f"Error setting DAC constant output: {e}") + + +def configure_dac_for_hardware(spi): + try: + # Enable internal reference + power_down_reg = spi_read(spi, 0x01) + power_down_reg &= ~(1 << 0) # Clear EXTREF bit for internal reference + spi_write(spi, 0x01, power_down_reg) + logger.info("Internal reference enabled") + + # Set RREF to default 10 kΩ for 1.0V reference + spi_write(spi, 0x0D, 0x00) + logger.info("RREF set to 10 kΩ for 1.0V reference") + + # Enable on-chip IRSET and QRSET + irset_value = 0xA0 # 10100000 + spi_write(spi, 0x04, irset_value) # IRSET + spi_write(spi, 0x07, irset_value) # QRSET + + # Disable internal termination resistors + ircml_value = 0x00 + spi_write(spi, 0x05, ircml_value) # IRCML + spi_write(spi, 0x08, ircml_value) # QRCML + + spi_write(spi, 0x02, 0xB4) + + # Verify settings + irset_read = spi_read(spi, 0x04) + qrset_read = spi_read(spi, 0x07) + ircml_read = spi_read(spi, 0x05) + qrcml_read = spi_read(spi, 0x08) + data_control_read = spi_read(spi, 0x02) + + if (irset_read == irset_value and qrset_read == irset_value and + ircml_read == ircml_value and qrcml_read == ircml_value and + data_control_read == 0xB4): + logger.info("DAC configured for 20mA output with external termination") + else: + logger.error(f"DAC configuration failed. IRSET: 0x{irset_read:02X}, QRSET: 0x{qrset_read:02X}, " + f"IRCML: 0x{ircml_read:02X}, QRCML: 0x{qrcml_read:02X}, " + f"Data Control: 0x{data_control_read:02X}") + + except Exception as e: + logger.error(f"Error configuring DAC: {e}") + +def read_from_memory(address, n_bytes): + assert n_bytes <= 4 + addr = address + + try: + f = os.open("/dev/mem", os.O_SYNC | os.O_RDWR) + with mmap.mmap( + f, + PAGESIZE, + mmap.MAP_SHARED, + mmap.PROT_READ | mmap.PROT_WRITE, + offset=addr & ~MAP_MASK, + ) as mem: + start_addr = addr & MAP_MASK + stop_addr = start_addr + 4 + # print(f"addr: 0x{addr:x}\tstart_addr: 0x{start_addr}\tstop_addr: 0x{stop_addr}") + contents = mem[start_addr:stop_addr] + read_value = list(contents)[:n_bytes] + finally: + os.close(f) + + return read_value + + +def write_to_memory(address, value): + value_bytes = value.to_bytes(4, "little") + addr = address + + try: + f = os.open("/dev/mem", os.O_SYNC | os.O_RDWR) + with mmap.mmap( + f, + PAGESIZE, + mmap.MAP_SHARED, + mmap.PROT_READ | mmap.PROT_WRITE, + offset=addr & ~MAP_MASK, + ) as mem: + start_addr = addr & MAP_MASK + stop_addr = start_addr + 4 + mem[start_addr:stop_addr] = value_bytes + contents = mem[start_addr:stop_addr] + finally: + os.close(f) - spi_write(spi, 0x12, 0x00) # Clear calibration bits - spi_write(spi, 0x0E, 0x30) # Keep CALSELI and CALSELQ set, clear CALCLK - print("DAC self-calibration completed") def manual_override(enable=True): reg_contents = read_from_memory(CTRL_ADDR, 1)[0] @@ -87,6 +223,7 @@ def manual_override(enable=True): to_write = reg_contents | 0b1 if enable else reg_contents & 0b110 write_to_memory(CTRL_ADDR, to_write) + def power_down(channel, power_down=True): assert channel in (0, 1) @@ -100,46 +237,42 @@ def power_down(channel, power_down=True): reg_contents = read_from_memory(CTRL_ADDR, 1)[0] print(f"REG contents: 0b{reg_contents:03b}") -def set_dac_output(value): - value = min(value, 0x3FFF) - low_word = value & 0xFF - high_word = (value >> 8) & 0x3F - - write_to_memory(CH0_HIGH_WORD_ADDR, high_word) - write_to_memory(CH0_LOW_WORD_ADDR, low_word) - write_to_memory(CH1_HIGH_WORD_ADDR, high_word) - write_to_memory(CH1_LOW_WORD_ADDR, low_word) - print(f"DAC output set to: 0x{value:04X}") - def configure_ad9117(): spi = spidev.SpiDev() - spi.open(MAIN_DAC_BUS, MAIN_DAC_DEVICE) - spi.max_speed_hz = 5000 - spi.mode = 0b00 # CPOL = 0 CPHA = 0 - spi.cshigh = False try: + spi.open(MAIN_DAC_BUS, MAIN_DAC_DEVICE) + spi.max_speed_hz = 5000 + spi.mode = 0b00 # CPOL = 0 CPHA = 0 + spi.cshigh = False + hard_reset(spi) - if not check_version(spi): - print("Unrecognized DAC version") - return False + check_version(spi) - configure_dac(spi) - # dac_self_calibration(spi) - - # Enable DAC outputs - spi_write(spi, 0x01, spi_read(spi, 0x01) & ~((1 << 4) | (1 << 3))) + configure_dac_for_hardware(spi) + set_data_control_and_output_mode(spi, 'differential') + wait_for_clock_sync(spi) + enable_dac_outputs(spi) power_down(0, False) power_down(1, False) + manual_override(True) - print("AD9117 configuration completed successfully") - return True + set_dac_constant_output(0xFFFF) + # Verify control register + reg_contents = read_from_memory(CTRL_ADDR, 1)[0] + logger.info(f"Control register contents after setting: 0b{reg_contents:03b}") + + # Verify channel settings + ch0_high = read_from_memory(CH0_HIGH_WORD_ADDR, 1)[0] + ch0_low = read_from_memory(CH0_LOW_WORD_ADDR, 1)[0] + ch1_high = read_from_memory(CH1_HIGH_WORD_ADDR, 1)[0] + ch1_low = read_from_memory(CH1_LOW_WORD_ADDR, 1)[0] + logger.info(f"Channel 0: 0x{ch0_high:02X}{ch0_low:02X}, Channel 1: 0x{ch1_high:02X}{ch1_low:02X}") except Exception as e: - print(f"Error configuring AD9117: {e}") - return False + print(f"Error initializing DAC: {e}") finally: spi.close() diff --git a/fast-servo/pyfastservo/loopback.py b/fast-servo/pyfastservo/loopback.py index 52b14b7..1ff959e 100644 --- a/fast-servo/pyfastservo/loopback.py +++ b/fast-servo/pyfastservo/loopback.py @@ -53,7 +53,7 @@ def perform_loopback_test(test_value): print(f"Expected: {test_value}, ADC: {adc_value}, DAC: {dac_value}") def main(): - test_value = 0x0FFF # Mid-range value (4095 in decimal) + test_value = 0x1FFF # Mid-range value (4095 in decimal) perform_loopback_test(test_value) if __name__ == "__main__":