forked from M-Labs/nix-servo
pyfastservo: fix dac init script and cleanup
This commit is contained in:
parent
61fa18fb18
commit
8506da0128
|
@ -17,8 +17,7 @@
|
|||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
||||
import mmap
|
||||
import os
|
||||
import time
|
||||
|
||||
import spidev
|
||||
from pyfastservo.common import (
|
||||
|
@ -29,108 +28,58 @@ from pyfastservo.common import (
|
|||
CTRL_ADDR,
|
||||
MAP_MASK,
|
||||
PAGESIZE,
|
||||
write_to_memory,
|
||||
read_from_memory
|
||||
)
|
||||
|
||||
# /dev/spidev2.0 <=> spidev<BUS>.<DEVICE>
|
||||
MAIN_DAC_BUS = 2
|
||||
MAIN_DAC_DEVICE = 0
|
||||
|
||||
DAC_VERSION = 0x0A
|
||||
|
||||
|
||||
def main_dac_init():
|
||||
spi = spidev.SpiDev()
|
||||
def spi_write(spi, address, value):
|
||||
spi.xfer2([address, value])
|
||||
|
||||
try:
|
||||
spi.open(MAIN_DAC_BUS, MAIN_DAC_DEVICE)
|
||||
spi.max_speed_hz = 5000
|
||||
spi.mode = 0b00 # CPOL = 0 CPHA = 0
|
||||
spi.cshigh = False
|
||||
def spi_read(spi, address):
|
||||
rx_buffer = spi.xfer2([0x80 | address, 0x00])
|
||||
return rx_buffer[1]
|
||||
|
||||
spi_buffer = [0x00, 0x10] # software reset
|
||||
spi.xfer2(spi_buffer)
|
||||
def hard_reset(spi):
|
||||
spi_write(spi, 0x00, 0x10) # Software reset
|
||||
spi_write(spi, 0x00, 0x00) # Release software reset
|
||||
spi_read(spi, 0x00) # Read reset address (necessary for reset to take effect)
|
||||
|
||||
spi_buffer = [0x00, 0x00] # release software reset
|
||||
spi.xfer2(spi_buffer)
|
||||
def check_version(spi):
|
||||
version = spi_read(spi, 0x1F)
|
||||
print(f"DAC version: 0x{version:02X}")
|
||||
return version == DAC_VERSION
|
||||
|
||||
spi_buffer = [
|
||||
0x80,
|
||||
0x00,
|
||||
] # for some reason it is needed to read the reset address for reset to actually reset
|
||||
rx_buffer = spi.xfer2(spi_buffer)
|
||||
def configure_dac(spi):
|
||||
power_down_reg = spi_read(spi, 0x01)
|
||||
spi_write(spi, 0x01, power_down_reg & ~(1 << 0)) # Clear EXTREF bit for internal reference
|
||||
spi_write(spi, 0x0D, 0x00) # Set RREF to 10 kΩ for 1.0V reference
|
||||
spi_write(spi, 0x04, 0xA0) # Enable on-chip IRSET (1.6 kΩ for 20mA output)
|
||||
spi_write(spi, 0x07, 0xA0) # Enable on-chip QRSET (1.6 kΩ for 20mA output)
|
||||
spi_write(spi, 0x05, 0x00) # Disable internal IRCML
|
||||
spi_write(spi, 0x08, 0x00) # Disable internal QRCML
|
||||
spi_write(spi, 0x02, 0xB4) # Enable 2's complement, LVDS interface, 4 LVDS lanes
|
||||
|
||||
spi_buffer = [0x9F, 0x00] # hardware version
|
||||
rx_buffer = spi.xfer2(spi_buffer)
|
||||
if rx_buffer[1] != DAC_VERSION:
|
||||
print(f"Unrecognized device: 0x{rx_buffer[1]:02X}")
|
||||
def dac_self_calibration(spi):
|
||||
spi_write(spi, 0x12, 0x00) # Reset calibration status
|
||||
spi_write(spi, 0x0E, 0x08) # Enable calibration clock, default divide ratio
|
||||
spi_write(spi, 0x0E, 0x38) # CALSELI = 1, CALSELQ = 1, CALCLK = 1
|
||||
spi_write(spi, 0x12, 0x10) # Set CALEN bit
|
||||
|
||||
print("=== Contents of spi buffer after DAC VERSION read back: ===")
|
||||
print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}")
|
||||
|
||||
spi_buffer = [0x82, 00]
|
||||
rx_buffer = spi.xfer2(spi_buffer)
|
||||
print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}")
|
||||
|
||||
# set to 2's complement and I to be first of pair on data input pads
|
||||
spi_buffer = [0x02, 0xB4]
|
||||
rx_buffer = spi.xfer2(spi_buffer)
|
||||
spi_buffer = [0x82, 00]
|
||||
rx_buffer = spi.xfer2(spi_buffer)
|
||||
print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}")
|
||||
|
||||
for i in range(10):
|
||||
spi_buffer = [0x94, 0x00]
|
||||
rx_buffer = spi.xfer2(spi_buffer)
|
||||
print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}")
|
||||
|
||||
finally:
|
||||
spi.close()
|
||||
|
||||
|
||||
def read_from_memory(address, n_bytes):
|
||||
assert n_bytes <= 4
|
||||
addr = address
|
||||
|
||||
try:
|
||||
f = os.open("/dev/mem", os.O_SYNC | os.O_RDWR)
|
||||
with mmap.mmap(
|
||||
f,
|
||||
PAGESIZE,
|
||||
mmap.MAP_SHARED,
|
||||
mmap.PROT_READ | mmap.PROT_WRITE,
|
||||
offset=addr & ~MAP_MASK,
|
||||
) as mem:
|
||||
start_addr = addr & MAP_MASK
|
||||
stop_addr = start_addr + 4
|
||||
# print(f"addr: 0x{addr:x}\tstart_addr: 0x{start_addr}\tstop_addr: 0x{stop_addr}")
|
||||
contents = mem[start_addr:stop_addr]
|
||||
read_value = list(contents)[:n_bytes]
|
||||
finally:
|
||||
os.close(f)
|
||||
|
||||
return read_value
|
||||
|
||||
|
||||
def write_to_memory(address, value):
|
||||
value_bytes = value.to_bytes(4, "little")
|
||||
addr = address
|
||||
|
||||
try:
|
||||
f = os.open("/dev/mem", os.O_SYNC | os.O_RDWR)
|
||||
with mmap.mmap(
|
||||
f,
|
||||
PAGESIZE,
|
||||
mmap.MAP_SHARED,
|
||||
mmap.PROT_READ | mmap.PROT_WRITE,
|
||||
offset=addr & ~MAP_MASK,
|
||||
) as mem:
|
||||
start_addr = addr & MAP_MASK
|
||||
stop_addr = start_addr + 4
|
||||
mem[start_addr:stop_addr] = value_bytes
|
||||
contents = mem[start_addr:stop_addr]
|
||||
finally:
|
||||
os.close(f)
|
||||
while True:
|
||||
status = spi_read(spi, 0x0F)
|
||||
if status & 0xC0 == 0xC0: # Both CALSTATI and CALSTATQ are 1
|
||||
break
|
||||
time.sleep(0.01)
|
||||
|
||||
spi_write(spi, 0x12, 0x00) # Clear calibration bits
|
||||
spi_write(spi, 0x0E, 0x30) # Keep CALSELI and CALSELQ set, clear CALCLK
|
||||
print("DAC self-calibration completed")
|
||||
|
||||
def manual_override(enable=True):
|
||||
reg_contents = read_from_memory(CTRL_ADDR, 1)[0]
|
||||
|
@ -138,7 +87,6 @@ def manual_override(enable=True):
|
|||
to_write = reg_contents | 0b1 if enable else reg_contents & 0b110
|
||||
write_to_memory(CTRL_ADDR, to_write)
|
||||
|
||||
|
||||
def power_down(channel, power_down=True):
|
||||
assert channel in (0, 1)
|
||||
|
||||
|
@ -152,31 +100,49 @@ def power_down(channel, power_down=True):
|
|||
reg_contents = read_from_memory(CTRL_ADDR, 1)[0]
|
||||
print(f"REG contents: 0b{reg_contents:03b}")
|
||||
|
||||
def set_dac_output(value):
|
||||
value = min(value, 0x3FFF)
|
||||
low_word = value & 0xFF
|
||||
high_word = (value >> 8) & 0x3F
|
||||
|
||||
def write_sample(channel, sample):
|
||||
assert channel in (0, 1)
|
||||
if channel == 0:
|
||||
addresses = [CH0_HIGH_WORD_ADDR, CH0_LOW_WORD_ADDR]
|
||||
else:
|
||||
addresses = [CH1_HIGH_WORD_ADDR, CH1_LOW_WORD_ADDR]
|
||||
write_to_memory(CH0_HIGH_WORD_ADDR, high_word)
|
||||
write_to_memory(CH0_LOW_WORD_ADDR, low_word)
|
||||
write_to_memory(CH1_HIGH_WORD_ADDR, high_word)
|
||||
write_to_memory(CH1_LOW_WORD_ADDR, low_word)
|
||||
print(f"DAC output set to: 0x{value:04X}")
|
||||
|
||||
low_word_value = sample & 0xFF
|
||||
high_word_value = (sample >> 8) & 0x3F
|
||||
values = [high_word_value, low_word_value]
|
||||
for addr, value in zip(addresses, values):
|
||||
write_to_memory(addr, value)
|
||||
def configure_ad9117():
|
||||
spi = spidev.SpiDev()
|
||||
spi.open(MAIN_DAC_BUS, MAIN_DAC_DEVICE)
|
||||
spi.max_speed_hz = 5000
|
||||
spi.mode = 0b00 # CPOL = 0 CPHA = 0
|
||||
spi.cshigh = False
|
||||
|
||||
try:
|
||||
hard_reset(spi)
|
||||
if not check_version(spi):
|
||||
print("Unrecognized DAC version")
|
||||
return False
|
||||
|
||||
def write_ramp():
|
||||
signal = [i for i in range(16384)]
|
||||
configure_dac(spi)
|
||||
dac_self_calibration(spi)
|
||||
|
||||
for value in signal:
|
||||
write_sample(0, value)
|
||||
|
||||
def main():
|
||||
main_dac_init()
|
||||
power_down(0, False)
|
||||
power_down(1, False)
|
||||
manual_override(True)
|
||||
|
||||
# Enable DAC outputs
|
||||
spi_write(spi, 0x01, spi_read(spi, 0x01) & ~((1 << 4) | (1 << 3)))
|
||||
|
||||
print("AD9117 configuration completed successfully")
|
||||
return True
|
||||
|
||||
except Exception as e:
|
||||
print(f"Error configuring AD9117: {e}")
|
||||
return False
|
||||
|
||||
finally:
|
||||
spi.close()
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
||||
configure_ad9117()
|
Loading…
Reference in New Issue