forked from M-Labs/thermostat
update docs
This commit is contained in:
parent
059dd0bbb6
commit
7c1820872b
16
README.md
16
README.md
|
@ -67,7 +67,21 @@ On a Windows machine install [st.com](https://st.com) DfuSe USB device firmware
|
||||||
openocd -f interface/stlink.cfg -f target/stm32f4x.cfg -c "program target/thumbv7em-none-eabihf/release/thermostat verify reset;exit"
|
openocd -f interface/stlink.cfg -f target/stm32f4x.cfg -c "program target/thumbv7em-none-eabihf/release/thermostat verify reset;exit"
|
||||||
```
|
```
|
||||||
|
|
||||||
## Network
|
## GUI Usage
|
||||||
|
|
||||||
|
A GUI has been developed for easy configuration and plotting of key parameters.
|
||||||
|
|
||||||
|
The Python GUI program is located at pytec/tecQT.py
|
||||||
|
|
||||||
|
The GUI is developed based on the Python library pyqtgraph. The environment needed to run the GUI is configured automatically by running:
|
||||||
|
|
||||||
|
```shell
|
||||||
|
nix develop
|
||||||
|
```
|
||||||
|
|
||||||
|
The GUI program assumes the default IP and port of 192.168.1.26 23 is used. If a different IP or port is used, the IP and port setting should be changed in the GUI code.
|
||||||
|
|
||||||
|
## Command Line Usage
|
||||||
|
|
||||||
### Connecting
|
### Connecting
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue