fix docs, fix i_set, fix GUI param ranges

This commit is contained in:
topquark12 2022-06-06 21:28:30 +08:00 committed by Egor Savkin
parent df072c415c
commit 3e1168dfc4
3 changed files with 12 additions and 7 deletions

View File

@ -184,7 +184,7 @@ postfilter rate can be tuned with the `postfilter` command.
- Connect TEC module device 1 to TEC1- and TEC1+.
- The GND pin is for shielding not for sinking TEC module currents.
When using a TEC module with the Thermostat, the Thermostat expects the thermal load (where the thermistor is located) to heat up with a positive software current set point, and cool down with a negative current set point.
When using a TEC module with the Thermostat, the Thermostat expects the thermal load (where the thermistor is located) to cool down with a positive software current set point, and heat up with a negative current set point.
Testing heat flow direction with a low set current is recommended before installation of the TEC module.

View File

@ -39,17 +39,17 @@ TECparams = [ [
GUIparams = [[
{'name': 'Disable Output', 'type': 'action', 'tip': 'Disable Output'},
{'name': 'Constant Current', 'type': 'group', 'children': [
{'name': 'Set Current', 'type': 'float', 'value': 0, 'step': 0.1, 'siPrefix': True, 'suffix': 'A'},
{'name': 'Set Current', 'type': 'float', 'value': 0, 'step': 0.1, 'limits': (-3, 3), 'siPrefix': True, 'suffix': 'A'},
]},
{'name': 'Temperature PID', 'type': 'bool', 'value': False, 'children': [
{'name': 'Set Temperature', 'type': 'float', 'value': 25, 'step': 0.1, 'siPrefix': True, 'suffix': 'C'},
{'name': 'Set Temperature', 'type': 'float', 'value': 25, 'step': 0.1, 'limits': (-273, 300), 'siPrefix': True, 'suffix': 'C'},
]},
{'name': 'Output Config', 'expanded': False, 'type': 'group', 'children': [
{'name': 'Max Current', 'type': 'float', 'value': 0, 'step': 0.1, 'siPrefix': True, 'suffix': 'A'},
{'name': 'Max Voltage', 'type': 'float', 'value': 0, 'step': 0.1, 'siPrefix': True, 'suffix': 'V'},
{'name': 'Max Current', 'type': 'float', 'value': 0, 'step': 0.1, 'limits': (0, 3), 'siPrefix': True, 'suffix': 'A'},
{'name': 'Max Voltage', 'type': 'float', 'value': 0, 'step': 0.1, 'limits': (0, 5), 'siPrefix': True, 'suffix': 'V'},
]},
{'name': 'Thermistor Config', 'expanded': False, 'type': 'group', 'children': [
{'name': 'T0', 'type': 'float', 'value': 25, 'step': 0.1, 'siPrefix': True, 'suffix': 'C'},
{'name': 'T0', 'type': 'float', 'value': 25, 'step': 0.1, 'limits': (-100, 100), 'siPrefix': True, 'suffix': 'C'},
{'name': 'R0', 'type': 'float', 'value': 10000, 'step': 1, 'siPrefix': True, 'suffix': 'Ohm'},
{'name': 'Beta', 'type': 'float', 'value': 3950, 'step': 1},
]},

View File

@ -115,7 +115,12 @@ impl Channels {
}
pub fn get_i(&mut self, channel: usize) -> ElectricCurrent {
let center_point = self.get_center(channel);
let center_point = match channel.into() {
0 => self.channel0.vref_meas,
1 => self.channel1.vref_meas,
_ => unreachable!(),
};
// let center_point = self.get_center(channel);
let r_sense = ElectricalResistance::new::<ohm>(R_SENSE);
let voltage = self.get_dac(channel);
let i_tec = (voltage - center_point) / (10.0 * r_sense);