Fan status via quadratic regression

* statuses: detect slow fan via quadratic regression and halts (hard stops) with constant threshold
* remove unsafe channels' copy and make FanCtrl own the channels
* scale fan values so that they would fit 0.05-1.0 PWM at all times
* rename fan-restore to fcurve-restore
* style, names and docs adjustments

Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
Egor Savkin 2023-01-04 16:01:34 +08:00
parent 630635486e
commit 21fc244eac
5 changed files with 164 additions and 129 deletions

View File

@ -95,7 +95,7 @@ Send commands as simple text string terminated by `\n`. Responses are
formatted as line-delimited JSON. formatted as line-delimited JSON.
| Syntax | Function | | Syntax | Function |
|----------------------------------|---------------------------------------------------------------------------| |----------------------------------|-------------------------------------------------------------------------------|
| `report` | Show current input | | `report` | Show current input |
| `report mode` | Show current report mode | | `report mode` | Show current report mode |
| `report mode <off/on>` | Set report mode | | `report mode <off/on>` | Set report mode |
@ -126,8 +126,8 @@ formatted as line-delimited JSON.
| `ipv4 <X.X.X.X/L> [Y.Y.Y.Y]` | Configure IPv4 address, netmask length, and optional default gateway | | `ipv4 <X.X.X.X/L> [Y.Y.Y.Y]` | Configure IPv4 address, netmask length, and optional default gateway |
| `fan` | Show current fan settings and sensors' measurements | | `fan` | Show current fan settings and sensors' measurements |
| `fan <value>` | Set fan power with values from 0 to 100, where 0 is auto mode | | `fan <value>` | Set fan power with values from 0 to 100, where 0 is auto mode |
| `fcurve <a> <b> <c>` | Set fan controller coefficients (see *Fan control* section) | | `fcurve <a> <b> <c>` | Set fan controller curve coefficients (see *Fan control* section) |
| `fan-restore` | Set fan controller coefficients to defaults (see *Fan control* section) | | `fcurve-restore` | Set fan controller curve coefficients to defaults (see *Fan control* section) |
## USB ## USB
@ -286,4 +286,4 @@ Please note that power doesn't correlate with the actual speed linearly.
3. `fcurve <a> <b> <c>` - set coefficients of the controlling curve `a*x^2 + b*x + c`, where `x` is `abs_max_tec_i/MAX_TEC_I`, 3. `fcurve <a> <b> <c>` - set coefficients of the controlling curve `a*x^2 + b*x + c`, where `x` is `abs_max_tec_i/MAX_TEC_I`,
i.e. receives values from 0 to 1 linearly tied to the maximum current. The controlling curve should produce values from 0 to 1, i.e. receives values from 0 to 1 linearly tied to the maximum current. The controlling curve should produce values from 0 to 1,
as below and beyond values would be substituted by 0 and 1 respectively. as below and beyond values would be substituted by 0 and 1 respectively.
4. `fan-restore` - restore fan settings to defaults: `auto = true, a = 1.0, b = 0.0, c = 0.04`. 4. `fcurve-restore` - restore fan settings to defaults: `auto = true, a = 1.0, b = 0.0, c = 0.00`.

View File

@ -342,7 +342,7 @@ impl Handler {
Ok(Handler::Reset) Ok(Handler::Reset)
} }
fn fan (socket: &mut TcpSocket, fan_pwm: Option<u32>, fan_ctrl: &mut FanCtrl) -> Result<Handler, Error> { fn fan(socket: &mut TcpSocket, fan_pwm: Option<u32>, fan_ctrl: &mut FanCtrl) -> Result<Handler, Error> {
match fan_pwm { match fan_pwm {
Some(val) => { Some(val) => {
fan_ctrl.set_auto_mode(val == 0); fan_ctrl.set_auto_mode(val == 0);
@ -366,43 +366,43 @@ impl Handler {
Ok(Handler::Handled) Ok(Handler::Handled)
} }
fn fan_coeff (socket: &mut TcpSocket, fan_ctrl: &mut FanCtrl, k_a: f64, k_b: f64, k_c: f64) -> Result<Handler, Error> { fn fan_curve(socket: &mut TcpSocket, fan_ctrl: &mut FanCtrl, k_a: f64, k_b: f64, k_c: f64) -> Result<Handler, Error> {
fan_ctrl.set_coefficients(k_a, k_b, k_c); fan_ctrl.set_curve(k_a, k_b, k_c);
send_line(socket, b"{}"); send_line(socket, b"{}");
Ok(Handler::Handled) Ok(Handler::Handled)
} }
fn fan_defaults (socket: &mut TcpSocket, fan_ctrl: &mut FanCtrl) -> Result<Handler, Error> { fn fan_defaults(socket: &mut TcpSocket, fan_ctrl: &mut FanCtrl) -> Result<Handler, Error> {
fan_ctrl.restore_defaults(); fan_ctrl.restore_defaults();
send_line(socket, b"{}"); send_line(socket, b"{}");
Ok(Handler::Handled) Ok(Handler::Handled)
} }
pub fn handle_command (command: Command, socket: &mut TcpSocket, channels: &mut Channels, session: &Session, leds: &mut Leds, store: &mut FlashStore, ipv4_config: &mut Ipv4Config, fan_ctrl: &mut FanCtrl) -> Result<Self, Error> { pub fn handle_command(command: Command, socket: &mut TcpSocket, session: &Session, leds: &mut Leds, store: &mut FlashStore, ipv4_config: &mut Ipv4Config, fan_ctrl: &mut FanCtrl) -> Result<Self, Error> {
match command { match command {
Command::Quit => Ok(Handler::CloseSocket), Command::Quit => Ok(Handler::CloseSocket),
Command::Reporting(_reporting) => Handler::reporting(socket), Command::Reporting(_reporting) => Handler::reporting(socket),
Command::Show(ShowCommand::Reporting) => Handler::show_report_mode(socket, session), Command::Show(ShowCommand::Reporting) => Handler::show_report_mode(socket, session),
Command::Show(ShowCommand::Input) => Handler::show_report(socket, channels), Command::Show(ShowCommand::Input) => Handler::show_report(socket, &mut fan_ctrl.channels),
Command::Show(ShowCommand::Pid) => Handler::show_pid(socket, channels), Command::Show(ShowCommand::Pid) => Handler::show_pid(socket, &mut fan_ctrl.channels),
Command::Show(ShowCommand::Pwm) => Handler::show_pwm(socket, channels), Command::Show(ShowCommand::Pwm) => Handler::show_pwm(socket, &mut fan_ctrl.channels),
Command::Show(ShowCommand::SteinhartHart) => Handler::show_steinhart_hart(socket, channels), Command::Show(ShowCommand::SteinhartHart) => Handler::show_steinhart_hart(socket, &mut fan_ctrl.channels),
Command::Show(ShowCommand::PostFilter) => Handler::show_post_filter(socket, channels), Command::Show(ShowCommand::PostFilter) => Handler::show_post_filter(socket, &mut fan_ctrl.channels),
Command::Show(ShowCommand::Ipv4) => Handler::show_ipv4(socket, ipv4_config), Command::Show(ShowCommand::Ipv4) => Handler::show_ipv4(socket, ipv4_config),
Command::PwmPid { channel } => Handler::engage_pid(socket, channels, leds, channel), Command::PwmPid { channel } => Handler::engage_pid(socket, &mut fan_ctrl.channels, leds, channel),
Command::Pwm { channel, pin, value } => Handler::set_pwm(socket, channels, leds, channel, pin, value), Command::Pwm { channel, pin, value } => Handler::set_pwm(socket, &mut fan_ctrl.channels, leds, channel, pin, value),
Command::CenterPoint { channel, center } => Handler::set_center_point(socket, channels, channel, center), Command::CenterPoint { channel, center } => Handler::set_center_point(socket, &mut fan_ctrl.channels, channel, center),
Command::Pid { channel, parameter, value } => Handler::set_pid(socket, channels, channel, parameter, value), Command::Pid { channel, parameter, value } => Handler::set_pid(socket, &mut fan_ctrl.channels, channel, parameter, value),
Command::SteinhartHart { channel, parameter, value } => Handler::set_steinhart_hart(socket, channels, channel, parameter, value), Command::SteinhartHart { channel, parameter, value } => Handler::set_steinhart_hart(socket, &mut fan_ctrl.channels, channel, parameter, value),
Command::PostFilter { channel, rate: None } => Handler::reset_post_filter(socket, channels, channel), Command::PostFilter { channel, rate: None } => Handler::reset_post_filter(socket, &mut fan_ctrl.channels, channel),
Command::PostFilter { channel, rate: Some(rate) } => Handler::set_post_filter(socket, channels, channel, rate), Command::PostFilter { channel, rate: Some(rate) } => Handler::set_post_filter(socket, &mut fan_ctrl.channels, channel, rate),
Command::Load { channel } => Handler::load_channel(socket, channels, store, channel), Command::Load { channel } => Handler::load_channel(socket, &mut fan_ctrl.channels, store, channel),
Command::Save { channel } => Handler::save_channel(socket, channels, channel, store), Command::Save { channel } => Handler::save_channel(socket, &mut fan_ctrl.channels, channel, store),
Command::Ipv4(config) => Handler::set_ipv4(socket, store, config), Command::Ipv4(config) => Handler::set_ipv4(socket, store, config),
Command::Reset => Handler::reset(channels), Command::Reset => Handler::reset(&mut fan_ctrl.channels),
Command::Dfu => Handler::dfu(channels), Command::Dfu => Handler::dfu(&mut fan_ctrl.channels),
Command::Fan {fan_pwm} => Handler::fan(socket, fan_pwm, fan_ctrl), Command::Fan {fan_pwm} => Handler::fan(socket, fan_pwm, fan_ctrl),
Command::FanCoeff { k_a, k_b, k_c } => Handler::fan_coeff(socket, fan_ctrl, k_a, k_b, k_c), Command::FanCurve { k_a, k_b, k_c } => Handler::fan_curve(socket, fan_ctrl, k_a, k_b, k_c),
Command::FanDefaults => Handler::fan_defaults(socket, fan_ctrl), Command::FanDefaults => Handler::fan_defaults(socket, fan_ctrl),
} }
} }

View File

@ -182,7 +182,7 @@ pub enum Command {
Fan { Fan {
fan_pwm: Option<u32> fan_pwm: Option<u32>
}, },
FanCoeff { FanCurve {
k_a: f64, k_a: f64,
k_b: f64, k_b: f64,
k_c: f64, k_c: f64,
@ -546,9 +546,9 @@ fn fan(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
Ok((input, result)) Ok((input, result))
} }
fn fan_coeff(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> { fn fan_curve(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
let (input, _) = tag("fcurve")(input)?; let (input, _) = tag("fcurve")(input)?;
let (input, coeffs) = alt(( let (input, curve) = alt((
|input| { |input| {
let (input, _) = whitespace(input)?; let (input, _) = whitespace(input)?;
let (input, k_a) = float(input)?; let (input, k_a) = float(input)?;
@ -566,8 +566,8 @@ fn fan_coeff(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
value(None, end) value(None, end)
))(input)?; ))(input)?;
let result = match coeffs { let result = match curve {
Some(coeffs) => Ok(Command::FanCoeff { k_a: coeffs.0, k_b: coeffs.1, k_c: coeffs.2 }), Some(curve) => Ok(Command::FanCurve { k_a: curve.0, k_b: curve.1, k_c: curve.2 }),
None => Err(Error::ParseFloat) None => Err(Error::ParseFloat)
}; };
Ok((input, result)) Ok((input, result))
@ -586,9 +586,9 @@ fn command(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
steinhart_hart, steinhart_hart,
postfilter, postfilter,
value(Ok(Command::Dfu), tag("dfu")), value(Ok(Command::Dfu), tag("dfu")),
value(Ok(Command::FanDefaults), tag("fan-restore")), value(Ok(Command::FanDefaults), tag("fcurve-restore")),
fan, fan,
fan_coeff, fan_curve,
))(input) ))(input)
} }

View File

@ -1,4 +1,3 @@
use core::{cmp::max_by};
use serde::Serialize; use serde::Serialize;
use stm32f4xx_hal::{ use stm32f4xx_hal::{
pwm::{self, PwmChannels}, pwm::{self, PwmChannels},
@ -21,15 +20,33 @@ use crate::{
pub type FanPin = PwmChannels<TIM8, pwm::C4>; pub type FanPin = PwmChannels<TIM8, pwm::C4>;
pub type TachoPin = PC8<Input<Floating>>; pub type TachoPin = PC8<Input<Floating>>;
const MAX_TEC_I: f64 = 3.0;
// as stated in the schematics // as stated in the schematics
const MAX_FAN_PWM: f64 = 100.0; const MAX_TEC_I: f64 = 3.0;
const MIN_FAN_PWM: f64 = 1.0;
const MAX_USER_FAN_PWM: f64 = 100.0;
const MIN_USER_FAN_PWM: f64 = 1.0;
const MAX_FAN_PWM: f64 = 1.0;
// below this value, motor pulse signal is too weak to be registered by tachometer
const MIN_FAN_PWM: f64 = 0.05;
const TACHO_MEASURE_MS: i64 = 2500; const TACHO_MEASURE_MS: i64 = 2500;
const TACHO_LOW_THRESHOLD: u32 = 100; // by default up to 2 cycles are skipped on changes in PWM output,
// and the halt threshold will help detect the failure during these skipped cycles
const TACHO_HALT_THRESHOLD: u32 = 250;
const TACHO_SKIP_CYCLES: u8 = 2;
const DEFAULT_K_A: f64 = 1.0; const DEFAULT_K_A: f64 = 1.0;
const DEFAULT_K_B: f64 = 0.0; const DEFAULT_K_B: f64 = 0.0;
const DEFAULT_K_C: f64 = 0.04; const DEFAULT_K_C: f64 = 0.0;
// This regression is from 6% to 25% lower than values registered in the experiments.
// Actual values would be better estimated by logarithmic regression, but that would require more
// runtime computation, and wouldn't give significant correlation difference
// (0.996 for log and 0.966 for quadratic regression).
const TACHO_REGRESSION_A: f64 = -0.04135128436;
const TACHO_REGRESSION_B: f64 = 6.23015531;
const TACHO_REGRESSION_C: f64 = 403.6833577;
#[derive(Serialize, Copy, Clone)] #[derive(Serialize, Copy, Clone)]
pub struct HWRev { pub struct HWRev {
@ -41,8 +58,8 @@ pub struct HWRev {
pub enum FanStatus { pub enum FanStatus {
OK, OK,
NotAvailable, NotAvailable,
Stalled, TooSlow,
LowSignal, Halted
} }
struct TachoCtrl { struct TachoCtrl {
@ -50,10 +67,9 @@ struct TachoCtrl {
tacho_cnt: u32, tacho_cnt: u32,
tacho_value: Option<u32>, tacho_value: Option<u32>,
prev_epoch: i64, prev_epoch: i64,
past_record: u64,
} }
pub struct FanCtrl<'a> { pub struct FanCtrl {
fan: FanPin, fan: FanPin,
tacho: TachoCtrl, tacho: TachoCtrl,
fan_auto: bool, fan_auto: bool,
@ -61,12 +77,13 @@ pub struct FanCtrl<'a> {
k_a: f64, k_a: f64,
k_b: f64, k_b: f64,
k_c: f64, k_c: f64,
channels: &'a mut Channels, pub channels: Channels,
last_status: FanStatus last_status: FanStatus,
skip_cycles: u8,
} }
impl<'a> FanCtrl<'a> { impl FanCtrl {
pub fn new(mut fan: FanPin, tacho: TachoPin, channels: &'a mut Channels, exti: &mut EXTI, syscfg: &mut SysCfg) -> Self { pub fn new(mut fan: FanPin, tacho: TachoPin, channels: Channels, exti: &mut EXTI, syscfg: &mut SysCfg) -> Self {
let available = channels.hwrev.fan_available(); let available = channels.hwrev.fan_available();
let mut tacho_ctrl = TachoCtrl::new(tacho); let mut tacho_ctrl = TachoCtrl::new(tacho);
@ -85,17 +102,20 @@ impl<'a> FanCtrl<'a> {
k_b: DEFAULT_K_B, k_b: DEFAULT_K_B,
k_c: DEFAULT_K_C, k_c: DEFAULT_K_C,
channels, channels,
last_status: FanStatus::OK, last_status: if available { FanStatus::OK } else { FanStatus::NotAvailable },
skip_cycles: 0
} }
} }
pub fn cycle(&mut self) -> Result<(), FanStatus>{ pub fn cycle(&mut self) -> Result<(), FanStatus> {
if self.available { if self.available {
self.tacho.cycle(); if self.tacho.cycle() {
self.skip_cycles >>= 1;
}
} }
self.adjust_speed(); self.adjust_speed();
let diagnose = self.diagnose(); let diagnose = self.diagnose();
if diagnose != self.last_status { if (self.skip_cycles == 0 || diagnose == FanStatus::Halted) && diagnose != self.last_status {
self.last_status = diagnose; self.last_status = diagnose;
Err(diagnose) Err(diagnose)
} else { } else {
@ -126,9 +146,7 @@ impl<'a> FanCtrl<'a> {
if self.fan_auto && self.available { if self.fan_auto && self.available {
let scaled_current = self.channels.current_abs_max_tec_i() / MAX_TEC_I; let scaled_current = self.channels.current_abs_max_tec_i() / MAX_TEC_I;
// do not limit upper bound, as it will be limited in the set_pwm() // do not limit upper bound, as it will be limited in the set_pwm()
let pwm = max_by(MAX_FAN_PWM * (scaled_current * (scaled_current * self.k_a + self.k_b) + self.k_c), let pwm = (MAX_USER_FAN_PWM * (scaled_current * (scaled_current * self.k_a + self.k_b) + self.k_c)) as u32;
MIN_FAN_PWM,
|a, b| a.partial_cmp(b).unwrap_or(core::cmp::Ordering::Equal)) as u32;
self.set_pwm(pwm); self.set_pwm(pwm);
} }
} }
@ -139,7 +157,7 @@ impl<'a> FanCtrl<'a> {
} }
#[inline] #[inline]
pub fn set_coefficients(&mut self, k_a: f64, k_b: f64, k_c: f64) { pub fn set_curve(&mut self, k_a: f64, k_b: f64, k_c: f64) {
self.k_a = k_a; self.k_a = k_a;
self.k_b = k_b; self.k_b = k_b;
self.k_c = k_c; self.k_c = k_c;
@ -148,28 +166,50 @@ impl<'a> FanCtrl<'a> {
#[inline] #[inline]
pub fn restore_defaults(&mut self) { pub fn restore_defaults(&mut self) {
self.set_auto_mode(true); self.set_auto_mode(true);
self.set_coefficients(DEFAULT_K_A, DEFAULT_K_B, DEFAULT_K_C); self.set_curve(DEFAULT_K_A, DEFAULT_K_B, DEFAULT_K_C);
} }
pub fn set_pwm(&mut self, fan_pwm: u32) -> f64 { pub fn set_pwm(&mut self, fan_pwm: u32) -> f64 {
let duty = fan_pwm as f64 / MAX_FAN_PWM; let fan_pwm = fan_pwm.min(MAX_USER_FAN_PWM as u32).max(MIN_USER_FAN_PWM as u32);
self.skip_cycles = if (self.tacho.get() as f64) <= Self::threshold_for_pwm(fan_pwm as f64) {
TACHO_SKIP_CYCLES
} else { self.skip_cycles };
let duty = Self::scale_number(fan_pwm as f64, MIN_FAN_PWM, MAX_FAN_PWM, MIN_USER_FAN_PWM, MAX_USER_FAN_PWM);
let max = self.fan.get_max_duty(); let max = self.fan.get_max_duty();
let value = ((duty * (max as f64)) as u16).min(max); let value = ((duty * (max as f64)) as u16).min(max);
self.fan.set_duty(value); self.fan.set_duty(value);
value as f64 / (max as f64) value as f64 / (max as f64)
} }
#[inline]
fn threshold_for_pwm(fan_pwm: f64) -> f64 {
(TACHO_REGRESSION_A * fan_pwm + TACHO_REGRESSION_B) * fan_pwm + TACHO_REGRESSION_C
}
#[inline]
fn scale_number(unscaled: f64, to_min: f64, to_max: f64, from_min: f64, from_max: f64) -> f64 {
(to_max - to_min) * (unscaled - from_min) / (from_max - from_min) + to_min
}
fn diagnose(&mut self) -> FanStatus { fn diagnose(&mut self) -> FanStatus {
if !self.available { if !self.available {
return FanStatus::NotAvailable; return FanStatus::NotAvailable;
} }
self.tacho.diagnose() let threshold = Self::threshold_for_pwm(self.get_pwm() as f64) as u32;
let tacho = self.tacho.get();
if tacho >= threshold {
FanStatus::OK
} else if tacho >= TACHO_HALT_THRESHOLD {
FanStatus::TooSlow
} else {
FanStatus::Halted
}
} }
fn get_pwm(&self) -> u32 { fn get_pwm(&self) -> u32 {
let duty = self.fan.get_duty(); let duty = self.fan.get_duty();
let max = self.fan.get_max_duty(); let max = self.fan.get_max_duty();
((duty as f64 / (max as f64)) * MAX_FAN_PWM) as u32 (Self::scale_number(duty as f64 / (max as f64), MIN_USER_FAN_PWM, MAX_USER_FAN_PWM, MIN_FAN_PWM, MAX_FAN_PWM) + 0.5) as u32
} }
} }
@ -180,34 +220,24 @@ impl TachoCtrl {
tacho_cnt: 0, tacho_cnt: 0,
tacho_value: None, tacho_value: None,
prev_epoch: 0, prev_epoch: 0,
past_record: 0,
} }
} }
fn init(&mut self, exti: &mut EXTI, syscfg: &mut SysCfg) { fn init(&mut self, exti: &mut EXTI, syscfg: &mut SysCfg) {
// These lines do not cause NVIC to run the ISR, // These lines do not cause NVIC to run the ISR,
// since the interrupt should be unmasked in the cortex_m::peripheral::NVIC. // since the interrupt is masked in the cortex_m::peripheral::NVIC.
// Also using interrupt-related workaround is the best // Also using interrupt-related workaround is the best
// option for the current version of stm32f4xx-hal, // option for the current version of stm32f4xx-hal,
// since tying the IC's PC8 with the PWM's PC9 to the same TIM8 is not supported, // since tying the IC's PC8 with the PWM's PC9 to the same TIM8 is not supported.
// and therefore would require even more weirder and unsafe hacks. // The possible solution would be to update the library to >=v0.14.*,
// Also such hacks wouldn't guarantee it to be more precise. // and use its Timer's counter functionality.
self.tacho.make_interrupt_source(syscfg); self.tacho.make_interrupt_source(syscfg);
self.tacho.trigger_on_edge(exti, Edge::Rising); self.tacho.trigger_on_edge(exti, Edge::Rising);
self.tacho.enable_interrupt(exti); self.tacho.enable_interrupt(exti);
} }
#[inline] // returns whether the epoch elapsed
fn add_record(&mut self, value: u32) { fn cycle(&mut self) -> bool {
self.past_record = self.past_record << 2;
if value >= TACHO_LOW_THRESHOLD {
self.past_record += 0b11;
} else if value > 0 && self.tacho_cnt < TACHO_LOW_THRESHOLD {
self.past_record += 0b10;
}
}
fn cycle(&mut self) {
let tacho_input = self.tacho.check_interrupt(); let tacho_input = self.tacho.check_interrupt();
if tacho_input { if tacho_input {
self.tacho.clear_interrupt_pending_bit(); self.tacho.clear_interrupt_pending_bit();
@ -217,25 +247,17 @@ impl TachoCtrl {
let instant = Instant::from_millis(i64::from(timer::now())); let instant = Instant::from_millis(i64::from(timer::now()));
if instant.millis - self.prev_epoch >= TACHO_MEASURE_MS { if instant.millis - self.prev_epoch >= TACHO_MEASURE_MS {
self.tacho_value = Some(self.tacho_cnt); self.tacho_value = Some(self.tacho_cnt);
self.add_record(self.tacho_cnt);
self.tacho_cnt = 0; self.tacho_cnt = 0;
self.prev_epoch = instant.millis; self.prev_epoch = instant.millis;
true
} else {
false
} }
} }
fn get(&self) -> u32 { fn get(&self) -> u32 {
self.tacho_value.unwrap_or(u32::MAX) self.tacho_value.unwrap_or(u32::MAX)
} }
fn diagnose(&mut self) -> FanStatus {
if self.past_record & 0b11 == 0b11 {
FanStatus::OK
} else if self.past_record & 0xAAAAAAAAAAAAAAAA > 0 {
FanStatus::LowSignal
} else {
FanStatus::Stalled
}
}
} }
impl HWRev { impl HWRev {
@ -272,8 +294,23 @@ impl FanStatus {
match *self { match *self {
FanStatus::OK => "Fan is OK".as_bytes(), FanStatus::OK => "Fan is OK".as_bytes(),
FanStatus::NotAvailable => "Fan is not available".as_bytes(), FanStatus::NotAvailable => "Fan is not available".as_bytes(),
FanStatus::Stalled => "Fan is stalled".as_bytes(), FanStatus::TooSlow => "Fan is too slow".as_bytes(),
FanStatus::LowSignal => "Fan is low signal".as_bytes(), FanStatus::Halted => "Fan is halted".as_bytes(),
}
}
}
#[cfg(test)]
mod test {
use super::*;
#[test]
fn test_scaler() {
for x in 1..100 {
assert_eq!((FanCtrl::scale_number(
FanCtrl::scale_number(x as f64, MIN_FAN_PWM, MAX_FAN_PWM, MIN_USER_FAN_PWM, MAX_USER_FAN_PWM),
MIN_USER_FAN_PWM, MAX_USER_FAN_PWM, MIN_FAN_PWM, MAX_FAN_PWM) + 0.5) as i32,
x);
} }
} }
} }

View File

@ -10,7 +10,6 @@ use panic_abort as _;
use panic_semihosting as _; use panic_semihosting as _;
use log::{error, info, warn}; use log::{error, info, warn};
use core::cell::RefCell;
use cortex_m::asm::wfi; use cortex_m::asm::wfi;
use cortex_m_rt::entry; use cortex_m_rt::entry;
use stm32f4xx_hal::{ use stm32f4xx_hal::{
@ -140,20 +139,19 @@ fn main() -> ! {
let mut store = flash_store::store(dp.FLASH); let mut store = flash_store::store(dp.FLASH);
let mut channels = RefCell::new(Channels::new(pins)); let mut channels = Channels::new(pins);
for c in 0..CHANNELS { for c in 0..CHANNELS {
match store.read_value::<ChannelConfig>(CHANNEL_CONFIG_KEY[c]) { match store.read_value::<ChannelConfig>(CHANNEL_CONFIG_KEY[c]) {
Ok(Some(config)) => Ok(Some(config)) =>
config.apply(channels.get_mut(), c), config.apply(&mut channels, c),
Ok(None) => Ok(None) =>
error!("flash config not found for channel {}", c), error!("flash config not found for channel {}", c),
Err(e) => Err(e) =>
error!("unable to load config {} from flash: {:?}", c, e), error!("unable to load config {} from flash: {:?}", c, e),
} }
} }
// considered safe since `channels` is being mutated in a single thread,
// while mutex would be excessive let mut fan_ctrl = FanCtrl::new(fan, tacho, channels, &mut dp.EXTI, &mut dp.SYSCFG.constrain());
let mut fan_ctrl = FanCtrl::new(fan, tacho, unsafe{ &mut *channels.as_ptr() }, &mut dp.EXTI, &mut dp.SYSCFG.constrain());
// default net config: // default net config:
let mut ipv4_config = Ipv4Config { let mut ipv4_config = Ipv4Config {
@ -183,7 +181,7 @@ fn main() -> ! {
loop { loop {
let mut new_ipv4_config = None; let mut new_ipv4_config = None;
let instant = Instant::from_millis(i64::from(timer::now())); let instant = Instant::from_millis(i64::from(timer::now()));
let updated_channel = channels.get_mut().poll_adc(instant); let updated_channel = fan_ctrl.channels.poll_adc(instant);
if let Some(channel) = updated_channel { if let Some(channel) = updated_channel {
server.for_each(|_, session| session.set_report_pending(channel.into())); server.for_each(|_, session| session.set_report_pending(channel.into()));
} }
@ -213,7 +211,7 @@ fn main() -> ! {
// Do nothing and feed more data to the line reader in the next loop cycle. // Do nothing and feed more data to the line reader in the next loop cycle.
Ok(SessionInput::Nothing) => {} Ok(SessionInput::Nothing) => {}
Ok(SessionInput::Command(command)) => { Ok(SessionInput::Command(command)) => {
match Handler::handle_command(command, &mut socket, channels.get_mut(), session, &mut leds, &mut store, &mut ipv4_config, &mut fan_ctrl) { match Handler::handle_command(command, &mut socket, session, &mut leds, &mut store, &mut ipv4_config, &mut fan_ctrl) {
Ok(Handler::NewIPV4(ip)) => new_ipv4_config = Some(ip), Ok(Handler::NewIPV4(ip)) => new_ipv4_config = Some(ip),
Ok(Handler::Handled) => {}, Ok(Handler::Handled) => {},
Ok(Handler::CloseSocket) => socket.close(), Ok(Handler::CloseSocket) => socket.close(),
@ -230,7 +228,7 @@ fn main() -> ! {
} }
} else if socket.can_send() { } else if socket.can_send() {
if let Some(channel) = session.is_report_pending() { if let Some(channel) = session.is_report_pending() {
match channels.get_mut().reports_json() { match fan_ctrl.channels.reports_json() {
Ok(buf) => { Ok(buf) => {
send_line(&mut socket, &buf[..]); send_line(&mut socket, &buf[..]);
session.mark_report_sent(channel); session.mark_report_sent(channel);