it-infra/nixbld-etc-nixos/configuration.nix
Sebastien Bourdeauducq b7a49505bc nixbld: end mailserver experiment
This was going well, until some assholes at Gmail decided to block our IP address and as usual PCCW are useless when it
comes to changing to a whitelisted IP.

https://support.google.com/mail/answer/10336?p=NotAuthorizedError

Fuck Google.
Fuck PCCW.
2021-08-02 13:32:29 +08:00

714 lines
24 KiB
Nix
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running nixos-help).
{ config, pkgs, ... }:
let
netifWan = "enp0s31f6";
netifLan = "enp3s0";
netifWifi = "wlp1s0";
netifSit = "henet0";
hydraWwwOutputs = "/var/www/hydra-outputs";
in
{
imports =
[
./hardware-configuration.nix
./backup-module.nix
];
# Use the systemd-boot EFI boot loader.
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
boot.blacklistedKernelModules = ["iwlwifi"];
boot.supportedFilesystems = ["zfs"];
services.zfs.autoScrub.enable = true;
services.zfs.autoScrub.interval = "monthly";
services.zfs.autoSnapshot.enable = true;
fileSystems."/tank" = {
device = "tank";
fsType = "zfs";
};
security.apparmor.enable = true;
networking = {
hostName = "nixbld";
hostId = "b82fb017";
firewall = {
allowedTCPPorts = [ 80 443 ];
allowedUDPPorts = [ 53 67 ];
trustedInterfaces = [ netifLan ];
};
interfaces."${netifLan}" = {
ipv4.addresses = [{
address = "192.168.1.1";
prefixLength = 24;
}];
ipv6.addresses = [{
address = "2001:470:f821:1::";
prefixLength = 64;
}];
ipv4.routes = [{
address = "192.168.13.0";
prefixLength = 24;
via = "192.168.1.30";
}];
ipv6.routes = [{
address = "2001:470:f821:3::";
prefixLength = 64;
via = "2001:470:f821:1:dea6:32ff:fe95:2fcf";
}];
};
interfaces."${netifWifi}" = {
ipv4.addresses = [{
address = "192.168.12.1";
prefixLength = 24;
}];
ipv6.addresses = [{
address = "2001:470:f821:2::";
prefixLength = 64;
}];
};
nat = {
enable = true;
externalInterface = netifWan;
internalInterfaces = [ netifLan netifWifi ];
forwardPorts = [
{ sourcePort = 2201; destination = "192.168.1.201:22"; proto = "tcp"; }
{ sourcePort = 2202; destination = "192.168.1.202:22"; proto = "tcp"; }
{ sourcePort = 2203; destination = "192.168.1.203:22"; proto = "tcp"; }
{ sourcePort = 2204; destination = "192.168.1.204:22"; proto = "tcp"; }
];
extraCommands = ''
iptables -w -N block-lan-from-wifi
iptables -w -A block-lan-from-wifi -i ${netifLan} -o ${netifWifi} -j DROP
iptables -w -A block-lan-from-wifi -i ${netifWifi} -o ${netifLan} -j DROP
iptables -w -A FORWARD -j block-lan-from-wifi
'';
extraStopCommands = ''
iptables -w -D FORWARD -j block-lan-from-wifi 2>/dev/null|| true
iptables -w -F block-lan-from-wifi 2>/dev/null|| true
iptables -w -X block-lan-from-wifi 2>/dev/null|| true
'';
};
sits."${netifSit}" = {
dev = netifWan;
remote = "216.218.221.6";
local = "42.200.147.171";
ttl = 255;
};
interfaces."${netifSit}".ipv6 = {
addresses = [{ address = "2001:470:18:629::2"; prefixLength = 64; }];
routes = [{ address = "::"; prefixLength = 0; }];
};
};
boot.kernel.sysctl."net.ipv6.conf.all.forwarding" = "1";
boot.kernel.sysctl."net.ipv6.conf.default.forwarding" = "1";
boot.kernel.sysctl."net.ipv6.conf.${netifLan}.accept_dad" = "0";
boot.kernel.sysctl."net.ipv6.conf.${netifWifi}.accept_dad" = "0";
services.unbound = {
enable = true;
settings = {
server = {
port = 5353;
};
};
};
services.hostapd = {
enable = true;
interface = netifWifi;
hwMode = "g";
ssid = "M-Labs";
wpaPassphrase = (import /etc/nixos/secret/wifi_password.nix);
extraConfig = ''
ieee80211d=1
country_code=HK
ieee80211n=1
wmm_enabled=1
auth_algs=1
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
'';
};
services.dnsmasq = {
enable = true;
servers = ["::1#5353"];
extraConfig = ''
interface=${netifLan}
interface=${netifWifi}
bind-interfaces
dhcp-range=interface:${netifLan},192.168.1.81,192.168.1.254,24h
dhcp-range=interface:${netifWifi},192.168.12.10,192.168.12.254,24h
enable-ra
dhcp-range=interface:${netifLan},::,constructor:${netifLan},ra-names
dhcp-range=interface:${netifWifi},::,constructor:${netifWifi},ra-only
no-resolv
# Static IPv4s to make Red Pitayas with factory firmware less annoying
dhcp-host=rp-f05cc9,192.168.1.190
dhcp-host=rp-f0612e,192.168.1.191
# Static IPv4s to make port redirections work
dhcp-host=rpi-1,192.168.1.201
dhcp-host=rpi-2,192.168.1.202
dhcp-host=rpi-3,192.168.1.203
dhcp-host=rpi-4,192.168.1.204
# Static IP addresses for non-DHCP boards
address=/rpi-ext/192.168.1.30
address=/rpi-ext/2001:470:f821:1:dea6:32ff:fe95:2fcf
address=/thermostat/192.168.1.26
address=/powercycler/192.168.1.31
address=/kc705/192.168.1.50
address=/zynq-experiments/192.168.1.51
address=/zc706/192.168.1.52
address=/zc706-2/192.168.1.53
address=/cora-z7/192.168.1.54
address=/rust-pitaya/192.168.1.55
address=/sayma/192.168.1.60
address=/metlino/192.168.1.65
address=/kasli/192.168.1.70
address=/kasli-customer/192.168.1.75
address=/stabilizer-customer/192.168.1.76
# uTCA MCH from NAT
address=/tschernobyl/192.168.1.80
'';
};
# Select internationalisation properties.
i18n.defaultLocale = "en_US.UTF-8";
console = {
font = "Lat2-Terminus16";
keyMap = "de";
};
# Set your time zone.
time.timeZone = "Asia/Hong_Kong";
# List packages installed in system profile. To search, run:
# $ nix search wget
environment.systemPackages = with pkgs; [
wget vim git file lm_sensors acpi pciutils psmisc telnet nixops
irssi tmux usbutils imagemagick jq zip unzip
];
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
# programs.mtr.enable = true;
# programs.gnupg.agent = { enable = true; enableSSHSupport = true; };
# List services that you want to enable:
services.apcupsd.enable = true;
services.apcupsd.configText = ''
UPSTYPE usb
NISIP 127.0.0.1
BATTERYLEVEL 10
MINUTES 5
'';
# Enable the OpenSSH daemon.
services.openssh.enable = true;
services.openssh.forwardX11 = true;
services.openssh.passwordAuthentication = false;
programs.mosh.enable = true;
programs.fish.enable = true;
# Enable CUPS to print documents.
services.avahi.enable = true;
services.avahi.interfaces = [ netifLan ];
services.avahi.publish.enable = true;
services.avahi.publish.userServices = true;
nixpkgs.config.allowUnfree = true;
services.printing.enable = true;
services.printing.drivers = [ pkgs.hplipWithPlugin ];
services.printing.browsing = true;
services.printing.listenAddresses = [ "*:631" ];
services.printing.defaultShared = true;
hardware.sane.enable = true;
hardware.sane.extraBackends = [ pkgs.hplipWithPlugin ];
users.extraGroups.hkadmin = { };
users.extraUsers.sb = {
isNormalUser = true;
extraGroups = ["wheel" "hkadmin" "lp" "scanner"];
openssh.authorizedKeys.keys = [
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCyPk5WyFoWSvF4ozehxcVBoZ+UHgrI7VW/OoQfFFwIQe0qvetUZBMZwR2FwkLPAMZV8zz1v4EfncudEkVghy4P+/YVLlDjqDq9zwZnh8Nd/ifu84wmcNWHT2UcqnhjniCdshL8a44memzABnxfLLv+sXhP2x32cJAamo5y6fukr2qLp2jbXzR+3sv3klE0ruUXis/BR1lLqNJEYP8jB6fLn2sLKinnZPfn6DwVOk10mGeQsdME/eGl3phpjhODH9JW5V2V5nJBbC0rBnq+78dyArKVqjPSmIcSy72DEIpTctnMEN1W34BGrnsDd5Xd/DKxKxHKTMCHtZRwLC2X0NWN"
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCMALVC8RDTHec+PC8y1s3tcpUAODgq6DEzQdHDf/cyvDMfmCaPiMxfIdmkns5lMa03hymIfSmLUF0jFFDc7biRp7uf9AAXNsrTmplHii0l0McuOOZGlSdZM4eL817P7UwJqFMxJyFXDjkubhQiX6kp25Kfuj/zLnupRCaiDvE7ho/xay6Jrv0XLz935TPDwkc7W1asLIvsZLheB+sRz9SMOb9gtrvk5WXZl5JTOFOLu+JaRwQLHL/xdcHJTOod7tqHYfpoC5JHrEwKzbhTOwxZBQBfTQjQktKENQtBxXHTe71rUEWfEZQGg60/BC4BrRmh4qJjlJu3v4VIhC7SSHn1"
];
shell = pkgs.fish;
};
users.extraUsers.rj = {
isNormalUser = true;
extraGroups = ["wheel"];
};
users.extraUsers.harry = {
isNormalUser = true;
extraGroups = ["hkadmin" "lp" "scanner"];
openssh.authorizedKeys.keys = [
"ecdsa-sha2-nistp384 AAAAE2VjZHNhLXNoYTItbmlzdHAzODQAAAAIbmlzdHAzODQAAABhBDcPNCgtdz8erFPRrAwCr4JrkeYXJUUvoRBgP0X2HlzJgDe1Inuo6sC6CGcO3IXbf4MwVA9XEp8BYPHARVeEHhufg/0wnIABLx2GcK99yxOLDUe4h/3YwtqvOcqHEsDx7w=="
];
};
users.extraUsers.nix = {
isNormalUser = true;
};
security.sudo.wheelNeedsPassword = false;
boot.kernel.sysctl."kernel.dmesg_restrict" = true;
services.udev.packages = [ pkgs.sane-backends ];
nix.distributedBuilds = true;
nix.buildMachines = [
{
hostName = "localhost";
maxJobs = 4;
system = "x86_64-linux";
supportedFeatures = ["big-parallel"];
}
{
hostName = "rpi-3";
sshUser = "nix";
sshKey = "/etc/nixos/secret/nix_id_rsa";
maxJobs = 1;
system = "aarch64-linux";
}
];
services.hydra = {
enable = true;
package = pkgs.hydra-unstable;
useSubstitutes = true;
hydraURL = "https://nixbld.m-labs.hk";
notificationSender = "hydra@m-labs.hk";
minimumDiskFree = 15; # in GB
minimumDiskFreeEvaluator = 1;
extraConfig =
''
binary_cache_secret_key_file = /etc/nixos/secret/nixbld.m-labs.hk-1
max_output_size = 10000000000
<runcommand>
job = web:web:web
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/web
</runcommand>
<runcommand>
job = artiq:full:sipyco-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/sipyco-manual-html
</runcommand>
<runcommand>
job = artiq:full:sipyco-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/sipyco-manual-latexpdf
</runcommand>
<runcommand>
job = artiq:full-beta:artiq-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-html-beta
</runcommand>
<runcommand>
job = artiq:full-beta:artiq-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-latexpdf-beta
</runcommand>
<runcommand>
job = artiq:full-beta:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel-beta
</runcommand>
<runcommand>
job = artiq:full:artiq-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-html
</runcommand>
<runcommand>
job = artiq:full:artiq-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-latexpdf
</runcommand>
<runcommand>
job = artiq:full:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel
</runcommand>
<runcommand>
job = artiq:full-legacy:artiq-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-html-legacy
</runcommand>
<runcommand>
job = artiq:full-legacy:artiq-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-latexpdf-legacy
</runcommand>
<runcommand>
job = artiq:full-legacy:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel-legacy
</runcommand>
<githubstatus>
jobs = artiq:fast.*:extended-tests
inputs = artiqSrc
useShortContext = 1
authorization = token ${(import /etc/nixos/secret/github_tokens.nix).artiq}
</githubstatus>
<gitea_authorization>
sb=${(import /etc/nixos/secret/gitea_tokens.nix).artiq-zynq}
</gitea_authorization>
'';
};
systemd.services.hydra-www-outputs-init = {
description = "Set up a hydra-owned directory for build outputs";
wantedBy = [ "multi-user.target" ];
requiredBy = [ "hydra-queue-runner.service" ];
before = [ "hydra-queue-runner.service" ];
serviceConfig = {
Type = "oneshot";
ExecStart = [ "${pkgs.coreutils}/bin/mkdir -p ${hydraWwwOutputs}" "${pkgs.coreutils}/bin/chown hydra-queue-runner:hydra ${hydraWwwOutputs}" ];
};
};
nix.extraOptions = ''
secret-key-files = /etc/nixos/secret/nixbld.m-labs.hk-1
'';
nix.sandboxPaths = ["/opt"];
services.munin-node.enable = true;
services.munin-cron = {
enable = true;
hosts = ''
[${config.networking.hostName}]
address localhost
'';
};
services.mlabs-backup.enable = true;
services.gitea = {
enable = true;
httpPort = 3001;
rootUrl = "https://git.m-labs.hk/";
appName = "M-Labs Git";
cookieSecure = true;
disableRegistration = true;
mailerPasswordFile = "/etc/nixos/secret/mailerpassword";
settings = {
indexer = {
REPO_INDEXER_ENABLED = true;
};
mailer = {
ENABLED = true;
HOST = "ssl.serverraum.org:587";
FROM = "sysop@m-labs.hk";
USER = "sysop@m-labs.hk";
};
service = {
ENABLE_NOTIFY_MAIL = true;
};
attachment = {
ALLOWED_TYPES = "*/*";
};
};
};
systemd.tmpfiles.rules = [
"L+ '${config.services.gitea.stateDir}/custom/templates/home.tmpl' - - - - ${./gitea-home.tmpl}"
"L+ '${config.services.gitea.stateDir}/custom/templates/user/auth/signin.tmpl' - - - - ${./gitea-signin.tmpl}"
];
services.mattermost = {
enable = true;
siteUrl = "https://chat.m-labs.hk/";
mutableConfig = true;
};
services.postgresql.package = pkgs.postgresql_11;
services.matterbridge = {
enable = true;
configPath = "/etc/nixos/secret/matterbridge.toml";
};
nixpkgs.config.packageOverrides = super: let self = super.pkgs; in {
nix = super.nix.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./nix-networked-derivations.diff ];
});
nixFlakes = super.nixFlakes.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./nix-3-networked-derivations.patch ];
});
hydra-unstable = super.hydra-unstable.overrideAttrs(oa: {
patches = oa.patches or [] ++ [
./hydra-conda.patch
./hydra-restrictdist.patch
];
hydraPath = oa.hydraPath + ":" + super.lib.makeBinPath [ super.jq ];
});
matterbridge = super.matterbridge.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./matterbridge-disable-github.patch ];
});
gitea = super.gitea.overrideAttrs(oa: {
preBuild = let tagsString = "pam sqlite sqlite_unlock_notify"; in ''
export buildFlagsArray=(
-tags="${tagsString}"
-ldflags='-X "main.Version=${oa.version}" -X "main.Tags=${tagsString}"'
)
'';
});
};
security.acme.acceptTerms = true;
security.acme.email = "sb" + "@m-labs.hk";
security.acme.certs = {
"nixbld.m-labs.hk" = {
group = "nginx";
webroot = "/var/lib/acme/acme-challenge";
extraDomainNames = [
"m-labs.hk"
"www.m-labs.hk"
"conda.m-labs.hk"
"lab.m-labs.hk"
"git.m-labs.hk"
"chat.m-labs.hk"
"hooks.m-labs.hk"
"forum.m-labs.hk"
"perso.m-labs.hk"
"call.m-labs.hk"
"nmigen.org"
"www.nmigen.org"
];
};
};
# https://github.com/NixOS/nixpkgs/issues/106862
systemd.services."acme-fixperms".wants = [ "unbound.service" "dnsmasq.service" ];
systemd.services."acme-fixperms".after = [ "unbound.service" "dnsmasq.service" ];
services.nginx = {
enable = true;
recommendedProxySettings = true;
recommendedGzipSettings = true;
virtualHosts = let
mainWebsite = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "${hydraWwwOutputs}/web";
extraConfig = ''
error_page 404 /404.html;
'';
locations."^~ /fonts/".extraConfig = ''
expires 60d;
'';
locations."^~ /js/".extraConfig = ''
expires 60d;
'';
locations."/MathJax/" = {
alias = "/var/www/MathJax/";
extraConfig = ''
expires 60d;
'';
};
# legacy URLs, redirect to avoid breaking people's bookmarks
locations."/gateware.html".extraConfig = ''
return 301 /gateware/migen/;
'';
locations."/migen".extraConfig = ''
return 301 /gateware/migen/;
'';
locations."/artiq".extraConfig = ''
return 301 /experiment-control/artiq/;
'';
locations."/artiq/resources.html".extraConfig = ''
return 301 /experiment-control/resources/;
'';
# autogenerated manuals
locations."/artiq/sipyco-manual/" = {
alias = "${hydraWwwOutputs}/sipyco-manual-html/share/doc/sipyco-manual/html/";
};
locations."=/artiq/sipyco-manual.pdf" = {
alias = "${hydraWwwOutputs}/sipyco-manual-latexpdf/share/doc/sipyco-manual/SiPyCo.pdf";
};
locations."/artiq/manual-beta/" = {
alias = "${hydraWwwOutputs}/artiq-manual-html-beta/share/doc/artiq-manual/html/";
};
locations."=/artiq/manual-beta.pdf" = {
alias = "${hydraWwwOutputs}/artiq-manual-latexpdf-beta/share/doc/artiq-manual/ARTIQ.pdf";
};
locations."/artiq/manual/" = {
alias = "${hydraWwwOutputs}/artiq-manual-html/share/doc/artiq-manual/html/";
};
locations."=/artiq/manual.pdf" = {
alias = "${hydraWwwOutputs}/artiq-manual-latexpdf/share/doc/artiq-manual/ARTIQ.pdf";
};
locations."/artiq/manual-legacy/" = {
alias = "${hydraWwwOutputs}/artiq-manual-html-legacy/share/doc/artiq-manual/html/";
};
locations."=/artiq/manual-legacy.pdf" = {
alias = "${hydraWwwOutputs}/artiq-manual-latexpdf-legacy/share/doc/artiq-manual/ARTIQ.pdf";
};
# legacy content
locations."/migen/manual/" = {
alias = "/var/www/m-labs.hk.old/migen/manual/";
};
locations."/artiq/manual-release-4/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-4/";
};
locations."/artiq/manual-release-3/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-3/";
};
locations."/artiq/manual-release-2/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-2/";
};
};
in {
"m-labs.hk" = mainWebsite;
"www.m-labs.hk" = mainWebsite;
"lab.m-labs.hk" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/munin/".alias = "/var/www/munin/";
locations."/munin".extraConfig = ''
auth_basic "Munin";
auth_basic_user_file /etc/nixos/secret/muninpasswd;
'';
};
"nixbld.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:3000";
};
"conda.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/artiq-beta/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel-beta/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
locations."/artiq/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
locations."/artiq-legacy/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel-legacy/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
};
"git.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:3001";
extraConfig = ''
client_max_body_size 300M;
'';
};
"chat.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:8065";
locations."~ /api/v[0-9]+/(users/)?websocket$".proxyPass = "http://127.0.0.1:8065";
locations."~ /api/v[0-9]+/(users/)?websocket$".proxyWebsockets = true;
};
"hooks.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/mattermost-github".extraConfig = ''
include ${pkgs.nginx}/conf/uwsgi_params;
uwsgi_pass unix:${config.services.uwsgi.runDir}/uwsgi-mgi.sock;
'';
locations."/rfq".extraConfig = ''
include ${pkgs.nginx}/conf/uwsgi_params;
uwsgi_pass unix:${config.services.uwsgi.runDir}/uwsgi-rfq.sock;
'';
};
"forum.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "/var/www/flarum/public";
locations."~ \.php$".extraConfig = ''
fastcgi_pass unix:${config.services.phpfpm.pools.flarum.socket};
fastcgi_index index.php;
'';
extraConfig = ''
index index.php;
include /var/www/flarum/.nginx.conf;
'';
};
"call.m-labs.hk" = {
useACMEHost = "nixbld.m-labs.hk";
enableACME = false;
forceSSL = true;
};
"perso.m-labs.hk" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "/var/www/perso";
};
"nmigen.org" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".extraConfig = ''
return 307 https://m-labs.hk/gateware/nmigen/;
'';
};
"www.nmigen.org" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".extraConfig = ''
return 307 https://m-labs.hk/gateware/nmigen/;
'';
};
};
};
services.uwsgi = {
enable = true;
plugins = [ "python3" ];
instance = {
type = "emperor";
vassals = {
mattermostgithub = import ./mattermost-github-integration/uwsgi-config.nix { inherit config pkgs; };
rfq = import ./rfq/uwsgi-config.nix { inherit config pkgs; };
};
};
};
services.mysql = {
enable = true;
package = pkgs.mariadb;
};
services.phpfpm.pools.flarum = {
user = "nobody";
settings = {
"listen.owner" = "nginx";
"listen.group" = "nginx";
"listen.mode" = "0600";
"pm" = "dynamic";
"pm.max_children" = 5;
"pm.start_servers" = 2;
"pm.min_spare_servers" = 1;
"pm.max_spare_servers" = 3;
"pm.max_requests" = 500;
};
};
services.jitsi-meet = {
enable = true;
hostName = "call.m-labs.hk";
};
services.jitsi-videobridge.openFirewall = true;
# This value determines the NixOS release with which your system is to be
# compatible, in order to avoid breaking some software such as database
# servers. You should change this only after NixOS release notes say you
# should.
system.stateVersion = "18.09"; # Did you read the comment?
}