1
0
Fork 0

Add operating warnings and zotino failure

Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
Egor Savkin 2023-05-10 17:17:14 +08:00
parent 2667ce11bb
commit f048f1e5b4
2 changed files with 20 additions and 1 deletions

View File

@ -1,5 +1,16 @@
# Build and test firmware # Build and test firmware
## Operating hints and warnings
* 😡 **Always** use grounding strap during dis/assembly or other cards' physical operation
* 😡 **Always** power off devices before un/plugging
* 🧐 If needed to power-cycle the crate, wait at least 30 seconds before turning them on
* 🙅 Avoid the boards touching conductive materials - wires, metals. Use at
least plastic ESD bags if you need the cards to be put at the desk or any other surface.
* 💁 Be gentle to the EEM ports and any other connectors. Support them when plugging, hold when unplugging
* 🙆 If you need to take the cards out, take them out one-by-one from the end, unplug EEM and cables if you feel high tension
* 🙆 Use dedicated power supplies for each crate
## Kasli standalone ## Kasli standalone
### Checklist ### Checklist
@ -63,7 +74,7 @@ you can use this book's pages, or if there is no instruction for testing your ha
### Known issues ### Known issues
* [artiq-zynq#197](https://git.m-labs.hk/M-Labs/artiq-zynq/issues/197) - some cards (Sampler, Mirny, Zotino and others) * [artiq-zynq#197](https://git.m-labs.hk/M-Labs/artiq-zynq/issues/197) - some cards (Sampler, Mirny, Zotino and others)
do not work properly with some EEM ports. You might need to reconnect the card to the other ports until it gets working. do not work properly with some EEM ports. You might need to connect the card to the other ports until it gets working.
## Master-satellite setups ## Master-satellite setups

View File

@ -48,3 +48,11 @@ Press ENTER when done.
2. Check that respective pins have voltages as described by `artiq_sinara_test` 2. Check that respective pins have voltages as described by `artiq_sinara_test`
3. If there are [BNC/SMA-IDC adapters](./bnc_sma_idc_adapter.md), also check their voltages - they should be the same 3. If there are [BNC/SMA-IDC adapters](./bnc_sma_idc_adapter.md), also check their voltages - they should be the same
4. Check LEDs are on 4. Check LEDs are on
## Common problems
### High-freq audible noise and output values all near -0.1 on Zotino v1.4.2
This may happen when power-cycle is too short. Power down the crate, wait at least 30 seconds, and power up again.
[Issue](https://github.com/sinara-hw/Zotino/issues/37).