diff --git a/src/hw/kasli_soc.md b/src/hw/kasli_soc.md
new file mode 100644
index 0000000..d2a939f
--- /dev/null
+++ b/src/hw/kasli_soc.md
@@ -0,0 +1,18 @@
+## Setup
+
+### Power on reset jumpers
+
+Before working with kasli_soc, check the correct position of the POR jumpers.
+If there are none, then install them.
+
+Picture below shows the right position.
+
+![](../img/kasli_soc_POR_jampers_position.jpg)
+
+### SD boot jumpers
+
+If you are going to use SD card boot, you need to check the boot source select jumpers.
+
+Picture below shows the jumpers in  SD boot position.
+
+![](../img/kasli_soc_SD_boot_jampers_position.jpg)
diff --git a/src/img/kasli_soc_POR_jampers_position.jpg b/src/img/kasli_soc_POR_jampers_position.jpg
new file mode 100644
index 0000000..7026ed1
Binary files /dev/null and b/src/img/kasli_soc_POR_jampers_position.jpg differ
diff --git a/src/img/kasli_soc_SD_boot_jampers_position.jpg b/src/img/kasli_soc_SD_boot_jampers_position.jpg
new file mode 100644
index 0000000..4082395
Binary files /dev/null and b/src/img/kasli_soc_SD_boot_jampers_position.jpg differ