1
0
Fork 0
assembly/src/hw/urukul.md

52 lines
1.4 KiB
Markdown
Raw Normal View History

# Sinara 4410/4412 DDS Urukul (AD9910/AD9912)
* [Datasheet](https://m-labs.hk/docs/sinara-datasheets/4410-4412.pdf)
* [Wiki](https://github.com/sinara-hw/Urukul/wiki)
## JSON
```json
{
"type": "urukul",
"dds": "<variant>", // ad9910/ad9912
"ports": [<port num>, <port num>],
"clk_sel": <clock num>
}
```
## Setup
Check if [SUServo](./suservo.md) is enabled/disabled on customer needs.
## Testing
After running `artiq_sinara_test`:
```text
*** Testing Urukul DDSes.
urukul0_cpld: initializing CPLD...
urukul0_cpld: testing attenuator digital control...
urukul0_cpld: done
Calibrating inter-device synchronization...
urukul0_ch0 no EEPROM synchronization
urukul0_ch1 no EEPROM synchronization
urukul0_ch2 no EEPROM synchronization
urukul0_ch3 no EEPROM synchronization
...done
All urukul channels active.
Check each channel amplitude (~1.6Vpp/8dbm at 50ohm) and frequency.
Frequencies:
urukul0_ch0 10MHz
urukul0_ch1 11MHz
urukul0_ch2 12MHz
urukul0_ch3 13MHz
Press ENTER when done.
Testing RF switch control. Check LEDs at urukul RF ports.
Press ENTER when done.
```
1. Setup oscilloscope's impedance at 50 ohm
2. Touch each connector with oscilloscope, setup time- and voltage- scale and trigger, so that you can see sine waves
3. Measure frequencies and amplitudes on each connector, check with `artiq_sinara_test`'s respective values
4. When done, proceed with `artiq_sinara_test` and check LEDs are lighting up one after another