Show and save set value for PWM limits

Show in PwmSummary the set value, before all PWM duty calculations
instead of the machine value after the calculations. Also save the set
value into the flash store instead of the machine value.

README.md

@@ -100,10 +100,10 @@ formatted as line-delimited JSON.
 | `report mode`                    | Show current report mode                                                      |
 | `report mode <off/on>`           | Set report mode                                                               |
 | `pwm`                            | Show current PWM settings                                                     |
-| `pwm <0/1> max_i_pos <amp>`      | Set maximum positive output current                                           |
+| `pwm <0/1> max_i_pos <amp>`      | Set maximum positive output current, clamped at [0, 2]                        |
-| `pwm <0/1> max_i_neg <amp>`      | Set maximum negative output current                                           |
+| `pwm <0/1> max_i_neg <amp>`      | Set maximum negative output current, clamped at [0, 2]                        |
-| `pwm <0/1> max_v <volt>`         | Set maximum output voltage                                                    |
+| `pwm <0/1> max_v <volt>`         | Set maximum output voltage, clamped at [0, 4]                                 |
-| `pwm <0/1> i_set <amp>`          | Disengage PID, set fixed output current                                       |
+| `pwm <0/1> i_set <amp>`          | Disengage PID, set fixed output current, clamped at [-2, 2]                   |
 | `pwm <0/1> pid`                  | Let output current to be controlled by the PID                                |
 | `center <0/1> <volt>`            | Set the MAX1968 0A-centerpoint to the specified fixed voltage                 |
 | `center <0/1> vref`              | Set the MAX1968 0A-centerpoint to measure from VREF                           |

pytec/pytec/client.py

@@ -15,7 +15,7 @@ class Client:
         pwm_report = self.get_pwm()
         for pwm_channel in pwm_report:
             for limit in ["max_i_neg", "max_i_pos", "max_v"]:
-                if pwm_channel[limit]["value"] == 0.0:
+                if pwm_channel[limit] == 0.0:
                     logging.warning("`{}` limit is set to zero on channel {}".format(limit, pwm_channel["channel"]))
 
     def _read_line(self):
@@ -52,16 +52,16 @@ class Client:
         Example::
             [{'channel': 0,
               'center': 'vref',
-              'i_set': {'max': 2.9802790335151985, 'value': -0.02002179650216762},
+              'i_set': -0.02002179650216762,
-              'max_i_neg': {'max': 3.0, 'value': 3.0},
+              'max_i_neg': 2.0,
-              'max_v': {'max': 5.988, 'value': 5.988},
+              'max_v': 3.988,
-              'max_i_pos': {'max': 3.0, 'value': 3.0}},
+              'max_i_pos': 2.0,
              {'channel': 1,
               'center': 'vref',
-              'i_set': {'max': 2.9802790335151985, 'value': -0.02002179650216762},
+              'i_set': -0.02002179650216762,
-              'max_i_neg': {'max': 3.0, 'value': 3.0},
+              'max_i_neg': 2.0,
-              'max_v': {'max': 5.988, 'value': 5.988},
+              'max_v': 3.988,
-              'max_i_pos': {'max': 3.0, 'value': 3.0}}
+              'max_i_pos': 2.0}
             ]
         """
         return self._get_conf("pwm")

src/channel_state.rs

@@ -16,6 +16,7 @@ use uom::si::{
 use crate::{
     ad7172,
     pid,
+    config::PwmLimits,
     steinhart_hart as sh,
     command_parser::CenterPoint,
 };
@@ -32,6 +33,7 @@ pub struct ChannelState {
     pub center: CenterPoint,
     pub dac_value: ElectricPotential,
     pub i_set: ElectricCurrent,
+    pub pwm_limits: PwmLimits,
     pub pid_engaged: bool,
     pub pid: pid::Controller,
     pub sh: sh::Parameters,
@@ -48,6 +50,11 @@ impl ChannelState {
             center: CenterPoint::Vref,
             dac_value: ElectricPotential::new::<volt>(0.0),
             i_set: ElectricCurrent::new::<ampere>(0.0),
+            pwm_limits: PwmLimits {
+                max_v: 0.0,
+                max_i_pos: 0.0,
+                max_i_neg: 0.0,
+            },
             pid_engaged: false,
             pid: pid::Controller::new(pid::Parameters::default()),
             sh: sh::Parameters::default(),

src/channels.rs

@@ -361,48 +361,16 @@ impl Channels {
         }
     }
 
-    fn get_pwm(&self, channel: usize, pin: PwmPin) -> f64 {
+    pub fn get_max_v(&mut self, channel: usize) -> ElectricPotential {
-        fn get<P: hal::PwmPin<Duty=u16>>(pin: &P) -> f64 {
+        ElectricPotential::new::<volt>(self.channel_state(channel).pwm_limits.max_v)
-            let duty = pin.get_duty();
-            let max = pin.get_max_duty();
-            duty as f64 / (max as f64)
-        }
-        match (channel, pin) {
-            (_, PwmPin::ISet) =>
-                panic!("i_set is no pwm pin"),
-            (0, PwmPin::MaxIPos) =>
-                get(&self.pwm.max_i_pos0),
-            (0, PwmPin::MaxINeg) =>
-                get(&self.pwm.max_i_neg0),
-            (0, PwmPin::MaxV) =>
-                get(&self.pwm.max_v0),
-            (1, PwmPin::MaxIPos) =>
-                get(&self.pwm.max_i_pos1),
-            (1, PwmPin::MaxINeg) =>
-                get(&self.pwm.max_i_neg1),
-            (1, PwmPin::MaxV) =>
-                get(&self.pwm.max_v1),
-            _ =>
-                unreachable!(),
-        }
     }
 
-    pub fn get_max_v(&mut self, channel: usize) -> (ElectricPotential, ElectricPotential) {
+    pub fn get_max_i_pos(&mut self, channel: usize) -> ElectricCurrent {
-        let max = 4.0 * ElectricPotential::new::<volt>(3.3);
+        ElectricCurrent::new::<ampere>(self.channel_state(channel).pwm_limits.max_i_pos)
-        let duty = self.get_pwm(channel, PwmPin::MaxV);
-        (duty * max, MAX_TEC_V)
     }
 
-    pub fn get_max_i_pos(&mut self, channel: usize) -> (ElectricCurrent, ElectricCurrent) {
+    pub fn get_max_i_neg(&mut self, channel: usize) -> ElectricCurrent {
-        let max = ElectricCurrent::new::<ampere>(3.0);
+        ElectricCurrent::new::<ampere>(self.channel_state(channel).pwm_limits.max_i_neg)
-        let duty = self.get_pwm(channel, PwmPin::MaxIPos);
-        (duty * max, MAX_TEC_I)
-    }
-
-    pub fn get_max_i_neg(&mut self, channel: usize) -> (ElectricCurrent, ElectricCurrent) {
-        let max = ElectricCurrent::new::<ampere>(3.0);
-        let duty = self.get_pwm(channel, PwmPin::MaxINeg);
-        (duty * max, MAX_TEC_I)
     }
 
     // Get current passing through TEC
@@ -444,22 +412,28 @@ impl Channels {
 
     pub fn set_max_v(&mut self, channel: usize, max_v: ElectricPotential) -> (ElectricPotential, ElectricPotential) {
         let max = 4.0 * ElectricPotential::new::<volt>(3.3);
-        let duty = (max_v.min(MAX_TEC_V).max(ElectricPotential::zero()) / max).get::<ratio>();
+        let max_v = max_v.min(MAX_TEC_V).max(ElectricPotential::zero());
+        let duty = (max_v / max).get::<ratio>();
         let duty = self.set_pwm(channel, PwmPin::MaxV, duty);
+        self.channel_state(channel).pwm_limits.max_v = max_v.get::<volt>();
         (duty * max, max)
     }
 
     pub fn set_max_i_pos(&mut self, channel: usize, max_i_pos: ElectricCurrent) -> (ElectricCurrent, ElectricCurrent) {
         let max = ElectricCurrent::new::<ampere>(3.0);
-        let duty = (max_i_pos.min(MAX_TEC_I).max(ElectricCurrent::zero()) / max).get::<ratio>();
+        let max_i_pos = max_i_pos.min(MAX_TEC_I).max(ElectricCurrent::zero());
+        let duty = (max_i_pos / max).get::<ratio>();
         let duty = self.set_pwm(channel, PwmPin::MaxIPos, duty);
+        self.channel_state(channel).pwm_limits.max_i_pos = max_i_pos.get::<ampere>();
         (duty * max, max)
     }
 
     pub fn set_max_i_neg(&mut self, channel: usize, max_i_neg: ElectricCurrent) -> (ElectricCurrent, ElectricCurrent) {
         let max = ElectricCurrent::new::<ampere>(3.0);
-        let duty = (max_i_neg.min(MAX_TEC_I).max(ElectricCurrent::zero()) / max).get::<ratio>();
+        let max_i_neg = max_i_neg.min(MAX_TEC_I).max(ElectricCurrent::zero());
+        let duty = (max_i_neg / max).get::<ratio>();
         let duty = self.set_pwm(channel, PwmPin::MaxINeg, duty);
+        self.channel_state(channel).pwm_limits.max_i_neg = max_i_neg.get::<ampere>();
         (duty * max, max)
     }
 
@@ -518,10 +492,10 @@ impl Channels {
         PwmSummary {
             channel,
             center: CenterPointJson(self.channel_state(channel).center.clone()),
-            i_set: (self.get_i(channel), MAX_TEC_I).into(),
+            i_set: self.get_i(channel),
-            max_v: self.get_max_v(channel).into(),
+            max_v: self.get_max_v(channel),
-            max_i_pos: self.get_max_i_pos(channel).into(),
+            max_i_pos: self.get_max_i_pos(channel),
-            max_i_neg: self.get_max_i_neg(channel).into(),
+            max_i_neg: self.get_max_i_neg(channel),
         }
     }
 
@@ -603,26 +577,14 @@ impl Serialize for CenterPointJson {
     }
 }
 
-#[derive(Serialize)]
-pub struct PwmSummaryField<T: Serialize> {
-    value: T,
-    max: T,
-}
-
-impl<T: Serialize> From<(T, T)> for PwmSummaryField<T> {
-    fn from((value, max): (T, T)) -> Self {
-        PwmSummaryField { value, max }
-    }
-}
-
 #[derive(Serialize)]
 pub struct PwmSummary {
     channel: usize,
     center: CenterPointJson,
-    i_set: PwmSummaryField<ElectricCurrent>,
+    i_set: ElectricCurrent,
-    max_v: PwmSummaryField<ElectricPotential>,
+    max_v: ElectricPotential,
-    max_i_pos: PwmSummaryField<ElectricCurrent>,
+    max_i_pos: ElectricCurrent,
-    max_i_neg: PwmSummaryField<ElectricCurrent>,
+    max_i_neg: ElectricCurrent,
 }
 
 #[derive(Serialize)]

src/config.rs

@@ -72,17 +72,17 @@ impl ChannelConfig {
 }
 
 #[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-struct PwmLimits {
+pub struct PwmLimits {
-    max_v: f64,
+    pub max_v: f64,
-    max_i_pos: f64,
+    pub max_i_pos: f64,
-    max_i_neg: f64,
+    pub max_i_neg: f64,
 }
 
 impl PwmLimits {
     pub fn new(channels: &mut Channels, channel: usize) -> Self {
-        let (max_v, _) = channels.get_max_v(channel);
+        let max_v = channels.get_max_v(channel);
-        let (max_i_pos, _) = channels.get_max_i_pos(channel);
+        let max_i_pos = channels.get_max_i_pos(channel);
-        let (max_i_neg, _) = channels.get_max_i_neg(channel);
+        let max_i_neg = channels.get_max_i_neg(channel);
         PwmLimits {
             max_v: max_v.get::<volt>(),
             max_i_pos: max_i_pos.get::<ampere>(),