README: polarity_swapped

Signed-off-by: Egor Savkin <es@m-labs.hk>

.gitignore

@@ -1,5 +1,2 @@
 target/
 result
-*.bin
-
-__pycache__/

README.md

@@ -264,7 +264,6 @@ with the following keys.
 | `sens`         | Ohms            | Thermistor resistance derived from `adc`             |
 | `temperature`  | Degrees Celsius | Steinhart-Hart conversion result derived from `sens` |
 | `pid_engaged`  | Boolean         | `true` if in closed-loop mode                        |
-| `current_swapped` | Boolean         | `true` if TEC current direction is swapped relative to front panel |
 | `i_set`        | Amperes         | TEC output current                                   |
 | `dac_value`    | Volts           | AD5680 output derived from `i_set`                   |
 | `dac_feedback` | Volts           | ADC measurement of the AD5680 output                 |

flake.nix

@@ -63,7 +63,7 @@
         name = "thermostat-dev-shell";
         packages = with pkgs; [
           rust llvm
-          openocd dfu-util rlwrap
+          openocd dfu-util
           ] ++ (with python3Packages; [
             numpy matplotlib
           ]);

src/channels.rs

@@ -22,7 +22,6 @@ use crate::{
     pins::{self, Channel0VRef, Channel1VRef},
     steinhart_hart,
 };
-use crate::timer::sleep;
 
 pub enum PinsAdcReadTarget {
     VREF,
@@ -153,13 +152,11 @@ impl Channels {
     }
 
     pub fn set_i(&mut self, channel: usize, i_set: ElectricCurrent) -> ElectricCurrent {
-        let i_set = i_set.min(MAX_TEC_I).max(-MAX_TEC_I);
+        let mut i_set = i_set.min(MAX_TEC_I).max(-MAX_TEC_I);
         self.channel_state(channel).i_set = i_set;
-        let negate = if self.channel_state(channel).polarity_swapped {
-            -1.0
-        } else {
-            1.0
-        };
+        if self.channel_state(channel).polarity_swapped {
+            i_set = -i_set;
+        }
         let vref_meas = match channel.into() {
             0 => self.channel0.vref_meas,
             1 => self.channel1.vref_meas,
@@ -167,9 +164,9 @@ impl Channels {
         };
         let center_point = vref_meas;
         let r_sense = ElectricalResistance::new::<ohm>(R_SENSE);
-        let voltage = negate * i_set * 10.0 * r_sense + center_point;
+        let voltage = i_set * 10.0 * r_sense + center_point;
         let voltage = self.set_dac(channel, voltage);
-        let i_set = negate * (voltage - center_point) / (10.0 * r_sense);
+        let i_set = (voltage - center_point) / (10.0 * r_sense);
         i_set
     }
 
@@ -275,6 +272,17 @@ impl Channels {
         }
     }
 
+    pub fn read_dac_feedback_until_stable(&mut self, channel: usize, tolerance: ElectricPotential) -> ElectricPotential {
+        let mut prev = self.adc_read(channel, PinsAdcReadTarget::DacVfb, 1);
+        loop {
+            let current = self.adc_read(channel, PinsAdcReadTarget::DacVfb, 1);
+            if (current - prev).abs() < tolerance {
+                return current;
+            }
+            prev = current;
+        }
+    }
+
     /// Calibrates the DAC output to match vref of the MAX driver to reduce zero-current offset of the MAX driver output.
     ///
     /// The thermostat DAC applies a control voltage signal to the CTLI pin of MAX driver chip to control its output current.
@@ -301,7 +309,7 @@ impl Channels {
         let mut start_value = 1;
         let mut best_error = ElectricPotential::new::<volt>(100.0);
 
-        for step in (5..18).rev() {
+        for step in (0..18).rev() {
             let mut prev_value = start_value;
             for value in (start_value..=ad5680::MAX_VALUE).step_by(1 << step) {
                 match channel {
@@ -313,9 +321,8 @@ impl Channels {
                     }
                     _ => unreachable!(),
                 }
-                sleep(10);
 
-                let dac_feedback = self.adc_read(channel, PinsAdcReadTarget::DacVfb, 64);
+                let dac_feedback = self.read_dac_feedback_until_stable(channel, ElectricPotential::new::<volt>(0.001));
                 let error = target_voltage - dac_feedback;
                 if error < ElectricPotential::new::<volt>(0.0) {
                     break;
@@ -391,21 +398,13 @@ impl Channels {
 
     pub fn get_max_i_pos(&mut self, channel: usize) -> (ElectricCurrent, ElectricCurrent) {
         let max = ElectricCurrent::new::<ampere>(3.0);
-        let duty = if self.channel_state(channel).polarity_swapped {
-            self.get_pwm(channel, PwmPin::MaxINeg)
-        } else {
-            self.get_pwm(channel, PwmPin::MaxIPos)
-        };
+        let duty = self.get_pwm(channel, PwmPin::MaxIPos);
         (duty * max, MAX_TEC_I)
     }
 
     pub fn get_max_i_neg(&mut self, channel: usize) -> (ElectricCurrent, ElectricCurrent) {
         let max = ElectricCurrent::new::<ampere>(3.0);
-        let duty = if self.channel_state(channel).polarity_swapped {
-            self.get_pwm(channel, PwmPin::MaxIPos)
-        } else {
-            self.get_pwm(channel, PwmPin::MaxINeg)
-        };
+        let duty = self.get_pwm(channel, PwmPin::MaxINeg);
         (duty * max, MAX_TEC_I)
     }
 
@@ -461,38 +460,17 @@ impl Channels {
     pub fn set_max_i_pos(&mut self, channel: usize, max_i_pos: ElectricCurrent) -> (ElectricCurrent, ElectricCurrent) {
         let max = ElectricCurrent::new::<ampere>(3.0);
         let duty = (max_i_pos.min(MAX_TEC_I).max(ElectricCurrent::zero()) / max).get::<ratio>();
-        let duty = if self.channel_state(channel).polarity_swapped {
-            self.set_pwm(channel, PwmPin::MaxINeg, duty)
-        } else {
-            self.set_pwm(channel, PwmPin::MaxIPos, duty)
-        };
+        let duty = self.set_pwm(channel, PwmPin::MaxIPos, duty);
         (duty * max, max)
     }
 
     pub fn set_max_i_neg(&mut self, channel: usize, max_i_neg: ElectricCurrent) -> (ElectricCurrent, ElectricCurrent) {
         let max = ElectricCurrent::new::<ampere>(3.0);
         let duty = (max_i_neg.min(MAX_TEC_I).max(ElectricCurrent::zero()) / max).get::<ratio>();
-        let duty = if self.channel_state(channel).polarity_swapped {
-            self.set_pwm(channel, PwmPin::MaxIPos, duty)
-        } else {
-            self.set_pwm(channel, PwmPin::MaxINeg, duty)
-        };
+        let duty = self.set_pwm(channel, PwmPin::MaxINeg, duty);
         (duty * max, max)
     }
 
-    pub fn swap_polarity(&mut self, channel: usize, swapped: bool) {
-        if self.channel_state(channel).polarity_swapped != swapped {
-            let i_set = self.channel_state(channel).i_set;
-            let max_i_pos = self.get_max_i_pos(channel).0;
-            let max_i_neg = self.get_max_i_neg(channel).0;
-
-            self.channel_state(channel).polarity_swapped = swapped;
-            self.set_i(channel, i_set);
-            self.set_max_i_pos(channel, max_i_pos);
-            self.set_max_i_neg(channel, max_i_neg);
-        }
-    }
-
     fn report(&mut self, channel: usize) -> Report {
         let i_set = self.get_i(channel);
         let i_tec = self.adc_read(channel, PinsAdcReadTarget::ITec, 16);

src/command_handler.rs

@@ -182,7 +182,10 @@ impl Handler {
     }
 
     fn swap_polarity (socket: &mut TcpSocket, channels: &mut Channels, channel: usize, swapped: bool) -> Result<Handler, Error> {
-        channels.swap_polarity(channel, swapped);
+        channels.channel_state(channel).polarity_swapped = swapped;
+        let channel_state = channels.channel_state(channel);
+        let i_set = channel_state.i_set;
+        channels.set_i(channel, i_set);
         send_line(socket, b"{}");
         Ok(Handler::Handled)
     }

src/config.rs

@@ -20,7 +20,6 @@ pub struct ChannelConfig {
     pid_target: f32,
     pid_engaged: bool,
     i_set: ElectricCurrent,
-    polarity_swapped: bool,
     sh: steinhart_hart::Parameters,
     pwm: PwmLimits,
     /// uses variant `PostFilter::Invalid` instead of `None` to save space
@@ -46,8 +45,7 @@ impl ChannelConfig {
             pid: state.pid.parameters.clone(),
             pid_target: state.pid.target as f32,
             pid_engaged: state.pid_engaged,
-            i_set,
-            polarity_swapped: state.polarity_swapped,
+            i_set: i_set,
             sh: state.sh.clone(),
             pwm,
             adc_postfilter,
@@ -70,7 +68,6 @@ impl ChannelConfig {
         };
         let _ = channels.adc.set_postfilter(channel as u8, adc_postfilter);
         let _ = channels.set_i(channel, self.i_set);
-        channels.swap_polarity(channel, self.polarity_swapped);
     }
 }
 

src/main.rs

@@ -58,7 +58,7 @@ mod hw_rev;
 
 const HSE: MegaHertz = MegaHertz(8);
 #[cfg(not(feature = "semihosting"))]
-const WATCHDOG_INTERVAL: u32 = 2_000;
+const WATCHDOG_INTERVAL: u32 = 1_000;
 #[cfg(feature = "semihosting")]
 const WATCHDOG_INTERVAL: u32 = 30_000;