f6802635a4
add command to reboot into DFU
...
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-13 11:59:06 +08:00
5c84b7438b
Integral rescaling
2021-01-08 11:25:01 +08:00
cc0126636c
report save success
...
save does not hang, it just did not report save success. Closes #33
Reviewed-on: M-Labs/thermostat#44
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-07 18:01:43 +08:00
9852b32646
command_parser, main: implement ShowCommand::Ipv4
...
Fixes Gitea issue #30
2020-12-20 20:44:10 +01:00
22b0c9fcad
main: don't re- set_ipv4_config every tick
2020-12-20 20:43:20 +01:00
b7e6cdbec2
pytec: measure interval
2020-12-16 22:14:21 +01:00
880a887c40
new flash-based ipv4 config with additional mask_len, gateway
2020-12-12 23:44:16 +01:00
383ebcd8e4
rewrite config for sfkv-based flash_store
2020-12-12 01:25:07 +01:00
a943308203
pid: never reset
2020-10-13 23:55:22 +02:00
6ba1459a3c
main: send error on invalid command
2020-10-11 23:11:27 +02:00
a332b5fcdc
main: fix saving new_ipv4_address
2020-10-11 01:59:39 +02:00
175b88d0e6
s/tecpak/thermostat/g
2020-10-11 01:59:39 +02:00
59103cb2a1
add support for ipv4 address reconfiguration
2020-10-01 01:34:46 +02:00
438da74721
main: remove all plain-text responses
2020-09-30 23:53:13 +02:00
026dd1ed9c
main: close tx half of sockets with closed rx half
...
fixes Gitea issue #9
2020-09-30 23:39:31 +02:00
d4e7036fab
session: rename SessionOutput to SessionInput
2020-09-30 23:35:11 +02:00
6e0cf26d6a
export postfilter + s-h as json
2020-09-30 22:53:21 +02:00
62d89a68a1
pwm: export summary as json
2020-09-30 22:10:42 +02:00
5521563c91
pid: export summary as json
2020-09-30 20:06:47 +02:00
9e5a58cafd
main: switch reports to json serialization
2020-09-27 23:58:03 +02:00
97a09e422b
main: add support for disabling postfilters
2020-09-26 01:29:35 +02:00
9f70ef2e0a
main: power_down channels before sys_reset
2020-09-25 22:24:43 +02:00
83589610b5
implement reset command
2020-09-25 00:14:29 +02:00
a2caac0fe5
channels: power_down TEC when thermistor is not connected to ADC
2020-09-25 00:01:08 +02:00
20059aff5c
channel_state: recognize unplugged thermistor
2020-09-24 23:34:09 +02:00
a1ad9b2456
main: load config from eeprom on boot
2020-09-24 23:08:42 +02:00
8d70c03520
config: finalize load/save
2020-09-24 23:04:29 +02:00
58e648b5e0
pid::Parameters, CenterPoint: demote f32 fields to save config space
2020-09-24 20:47:02 +02:00
d40a038c2f
config: switch to postcard encoding
2020-09-24 02:06:53 +02:00
5d0d75d395
config: encode with serde_cbor
2020-09-24 01:18:33 +02:00
93f14523d7
command_parser: parse load/save
2020-09-24 01:17:50 +02:00
201701ee8b
implement mac address generation with reading eui48 from i2c eeprom
2020-09-24 00:19:07 +02:00
a84242fb1f
implement setting i_set centerpoint
2020-09-23 22:30:04 +02:00
b394cfa3d4
main: remove special handling for PwmPin::ISet
2020-09-23 20:50:50 +02:00
b9902929a9
test: #[allow(unused)]
2020-09-18 01:22:41 +02:00
a4dde1b8ca
delint
2020-09-18 00:55:53 +02:00
34543c8660
pid: only reset after target change
2020-09-18 00:24:00 +02:00
83a209397e
fix tests
2020-09-18 00:23:30 +02:00
ba84295ec5
reconnect the pid controller
2020-09-18 00:09:30 +02:00
fb81380955
fix tests
...
run with `cargo test --target=x86_64-unknown-linux-gnu`
2020-09-17 01:48:27 +02:00
94e0525002
tec_u_meas: subtract vref offset
2020-09-17 01:20:47 +02:00
dd06ae1075
main: improve output
2020-09-16 23:32:48 +02:00
f76ee9a607
separate adc and max vref
2020-09-16 23:31:49 +02:00
fc0ca8b581
calculate i_set current
2020-09-16 22:22:48 +02:00
8c80062da8
use proper units for pwm pins
2020-09-16 22:06:15 +02:00
7d45d5ad32
adc: complete temperature calculation
2020-09-16 20:50:23 +02:00
dda1f2f0b4
use ThermodynamicTemperature
2020-09-16 18:40:07 +02:00
b80fcc430b
channel_state: move adc_calibration into ChannelState
2020-09-13 23:15:48 +02:00
bb26490153
unit: replace with uom
2020-09-13 23:13:51 +02:00
10208e1ac0
main: bump WATCHDOG_INTERVAL to 1s
...
required for running Channels.calibrate_dac_value()
2020-09-10 23:28:00 +02:00
