62d0f510a3
Integrate WrappedClient into Thermostat model
2024-08-16 18:01:58 +08:00
27b326eaa9
Should not stop cancelling read if timeout'd
2024-08-16 18:01:58 +08:00
2ed1bfab5e
Remove exception too general
2024-08-16 18:01:58 +08:00
d75f207808
Fix Autotuner state for forceful disconnect
2024-08-16 18:01:58 +08:00
3369ed2c77
Correct exception catching
...
asyncio.Task.result() is simply going to throw the exception in
asyncio.Task.exception(), there is no need to manually throw it.
2024-08-16 18:01:58 +08:00
9aaadfa6e6
================Force connection fix starts here========
2024-08-16 18:01:58 +08:00
3fc32c81f5
Make connection loss handling more elegant
...
Show an info box on connection lost informing the user that the
Thermostat was forcefully disconnected.
2024-08-16 18:01:58 +08:00
a7a847e2dd
Formatting
2024-08-16 18:01:58 +08:00
89dd28b844
Use asserts to check for connectivity
2024-08-16 18:01:58 +08:00
f17f8de0b0
Add back the parent
2024-08-16 18:01:58 +08:00
279bd446c5
README: Proofread
2024-08-16 18:01:58 +08:00
0cb50d5aac
Swap order arounda bit more
2024-08-16 18:01:58 +08:00
2f8814a93c
Fix method call
2024-08-16 18:01:57 +08:00
3ba58ab4ae
flake.nix: nixfmt-rfc-style
2024-08-16 18:01:57 +08:00
978d44f886
Use qtextras
2024-08-16 18:01:57 +08:00
288b94352b
Expand PID Settings on PID engage
2024-08-16 18:01:57 +08:00
5574559ac6
ctrl_panel: Reformat SpinBox text always if valid
...
The parameter SpinBoxes previously would only update if the interpreted
value was changed, missing cases where the text would have changed but
the value stays the same, e.g. removing trailing decimal zeros.
2024-08-16 14:05:44 +08:00
e160a6f514
ctrl_panel: Move postfilter into its own group
2024-08-16 14:05:44 +08:00
ae9bd1a859
ctrl_panel: Use new locking mechanism from Kirdy
2024-08-16 14:05:44 +08:00
0f768f30e8
ctrl_panel: Fix editing fields with unit "°C"
...
A faulty regular expression within PyQtGraph causes any Parameter with a
suffix that doesn't begin with an alphanumeric character (as matched
with \w) to act abnormally. For instance, entering "100 °C" into the
input boxes gets interpreted as 10 °C.
Patch the FLOAT_REGEX in PyQtGraph to simply match for any character in
the suffix group.
2024-08-16 14:05:44 +08:00
07095d77c8
ctrl_panel: More appropriate steps and fixes
2024-08-16 14:05:44 +08:00
4a7d7abf3a
ctrl_panel: Put plotted values into readings group
...
For more intuitiveness to first-time users
2024-08-16 14:05:44 +08:00
b9cf60f2df
ctrl_panel: Fix max_v to only have unit "V"
...
As most users do not need to limit TEC voltage with accuracy of less
than 1mV.
2024-08-16 14:05:44 +08:00
3ffa939970
ctrl_panel: Bold "Control Method" text
2024-08-16 14:05:44 +08:00
87ba107ce5
ctrl_panel: Indicate active parameter of control
...
Instead of hiding the inactive control parameter, underline and bold the
active control parameter title, e.g. "Set Current" when control method
is constant current, and "Setpoint" when it is temperature PID.
2024-08-16 14:05:44 +08:00
319fb9cf9e
ctrl_panel: Limits fixes
...
* PID Autotune test current should be positive
* max_v should be 4 V not 5 V
* r0 should not be negative
2024-08-16 14:05:44 +08:00
f7c266539b
ctrl_panel: Code cleanup
...
* Remove unnecessary duplication of `THERMOSTAT_PARAMETERS`
* i -> ch
* Separate ParameterTree and Parameter initiation
* Remove extra "channel" option to root parameters, as the "value"
option is already the channel number
2024-08-16 14:05:44 +08:00
df9715b3ef
ctrl_panel: PID Auto Tune -> PID Autotune
2024-08-16 14:05:44 +08:00
82279f15da
ctrl_panel: Stop crushing spinboxes
...
It might not be the case on some themes, but on the default Qt theme the
spinbox are a bit too short for the containing numbers. See
https://github.com/pyqtgraph/pyqtgraph/issues/701 .
2024-08-16 14:05:44 +08:00
fff42bfa4c
ctrl_panel: Pin down units for editable fields
...
User input always has the same order of magnitude, so allowing multiple
siPrefixes would be unwanted complexity. Don't allow them to be changed.
The Parameter option "noUnitEditing" is added to do so by the following
measures:
1. Don't validate for changed siPrefix (if pinned) and suffix, which
avoids their removal.
2. Avoid getting the cursor embedded within the unit.
2024-08-16 14:05:44 +08:00
d3b93b1263
ctrl_panel: Remove need for "mA" hack
...
Remove all instances of mA scaling scattered all around the code and
specify it in the parameter tree with a single source of truth.
Done by adding the option "pinSiPrefix" for all Parameters of type `int`
or `float`, and using it for current Parameters with unit "mA".
2024-08-16 14:05:44 +08:00
4309f9044c
ctrl_panel: Appropriate units for measured current
...
Allow the readonly display of current to vary its SI prefix in the unit,
since as a display entry it won't have the unit adjustment problem.
2024-08-13 12:38:32 +08:00
81418d0a55
ctrl_panel: Improve postfilter description
2024-08-13 12:38:32 +08:00
7fb933faa2
ctrl_panel: Add and improve tooltips and titles
...
For users' better understanding of what the parameters do
2024-08-13 12:38:29 +08:00
437c9cec34
ctrl_panel: Refer to Parameters by concise names
...
For displayed string representations, use the `title` key, or for
`ListParameter`s, use the dictionary mapping method instead.
2024-07-19 15:49:19 +08:00
7829ce6adf
ctrl_panel: Config -> Settings
2024-07-19 15:49:16 +08:00
0f14212622
Format JSON
2024-07-19 15:48:57 +08:00
b768d61e39
Merge pull request 'GUI: Text changes' ( #3 ) from gui_dev-str_changes into gui_dev
...
Reviewed-on: linuswck/thermostat#3
2024-07-19 15:36:01 +08:00
d244ba392a
Fix typos
2024-07-19 15:34:31 +08:00
93d6df5e92
Merge pull request 'GUI: Some repo organisation' ( #1 ) from gui_dev-repo_org into gui_dev
...
Reviewed-on: linuswck/thermostat#1
2024-07-12 10:34:23 +08:00
44bea87f03
Thermostat.disconnect -> Thermostat.end_session
...
QObject already has a disconnect method, avoid overriding it.
2024-07-10 15:56:43 +08:00
e6f62e9e19
flake: sha256 -> hash
2024-07-10 15:56:43 +08:00
271fe449ba
Remove duplicated show call
...
MainWindow.show() already called in coro_main
2024-07-10 15:56:43 +08:00
70db0a39eb
Remove duplicated antialias config option
...
Already set in live_plot_view.py
2024-07-10 15:56:43 +08:00
26c7382b1e
Move GUI components and examples into folder
...
For better organisation
2024-07-10 15:56:43 +08:00
c415d9de8a
Use MANIFEST.in
...
Allows for more accurate control over included files in pytec package
2024-07-10 15:56:43 +08:00
7069111e21
Expose frontend scripts exclusively in pytec
2024-07-10 15:56:43 +08:00
1707728c3c
thermostat_data_model.py -> thermostat.py
2024-07-10 15:56:34 +08:00
a16d2e9a9e
Follow CapWords convention for class names
...
Re: PEP8
2024-07-10 15:45:03 +08:00
bc4ac43e0b
Put comments in right place
2024-07-10 13:07:31 +08:00
