atse/thermostat
1
0
Fork 0
forked from M-Labs/thermostat
Code Issues Pull Requests Activity

README: polarity_swapped

Browse Source
This commit is contained in:
atse 2024-08-16 17:43:14 +08:00
parent f3d5b1dc6b
commit ce4fb6090a
1 changed files with 37 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

73
README.md
View File

@ -94,42 +94,43 @@ The scope of this setting is per TCP session.
Send commands as simple text string terminated by `\n`. Responses are Send commands as simple text string terminated by `\n`. Responses are
formatted as line-delimited JSON. formatted as line-delimited JSON.
| Syntax | Function | | Syntax | Function |
|----------------------------------|-------------------------------------------------------------------------------| |-------------------------------------------|-------------------------------------------------------------------------------|
| `report` | Show current input | | `report` | Show current input |
| `report mode` | Show current report mode | | `report mode` | Show current report mode |
| `report mode <off/on>` | Set report mode | | `report mode <off/on>` | Set report mode |
| `pwm` | Show current PWM settings | | `pwm` | Show current PWM settings |
| `pwm <0/1> max_i_pos <amp>` | Set maximum positive output current | | `pwm <0/1> max_i_pos <amp>` | Set maximum positive output current |
| `pwm <0/1> max_i_neg <amp>` | Set maximum negative output current | | `pwm <0/1> max_i_neg <amp>` | Set maximum negative output current |
| `pwm <0/1> max_v <volt>` | Set maximum output voltage | | `pwm <0/1> max_v <volt>` | Set maximum output voltage |
| `pwm <0/1> i_set <amp>` | Disengage PID, set fixed output current | | `pwm <0/1> i_set <amp>` | Disengage PID, set fixed output current |
| `pwm <0/1> pid` | Let output current to be controlled by the PID | | `pwm <0/1> polarity_swapped <false/true>` | Swap output current polarity on channel |
| `center <0/1> <volt>` | Set the MAX1968 0A-centerpoint to the specified fixed voltage | | `pwm <0/1> pid` | Let output current to be controlled by the PID |
| `center <0/1> vref` | Set the MAX1968 0A-centerpoint to measure from VREF | | `center <0/1> <volt>` | Set the MAX1968 0A-centerpoint to the specified fixed voltage |
| `pid` | Show PID configuration | | `center <0/1> vref` | Set the MAX1968 0A-centerpoint to measure from VREF |
| `pid <0/1> target <deg_celsius>` | Set the PID controller target temperature | | `pid` | Show PID configuration |
| `pid <0/1> kp <value>` | Set proportional gain | | `pid <0/1> target <deg_celsius>` | Set the PID controller target temperature |
| `pid <0/1> ki <value>` | Set integral gain | | `pid <0/1> kp <value>` | Set proportional gain |
| `pid <0/1> kd <value>` | Set differential gain | | `pid <0/1> ki <value>` | Set integral gain |
| `pid <0/1> output_min <amp>` | Set mininum output | | `pid <0/1> kd <value>` | Set differential gain |
| `pid <0/1> output_max <amp>` | Set maximum output | | `pid <0/1> output_min <amp>` | Set mininum output |
| `s-h` | Show Steinhart-Hart equation parameters | | `pid <0/1> output_max <amp>` | Set maximum output |
| `s-h <0/1> <t0/b/r0> <value>` | Set Steinhart-Hart parameter for a channel | | `s-h` | Show Steinhart-Hart equation parameters |
| `postfilter` | Show postfilter settings | | `s-h <0/1> <t0/b/r0> <value>` | Set Steinhart-Hart parameter for a channel |
| `postfilter <0/1> off` | Disable postfilter | | `postfilter` | Show postfilter settings |
| `postfilter <0/1> rate <rate>` | Set postfilter output data rate | | `postfilter <0/1> off` | Disable postfilter |
| `load [0/1]` | Restore configuration for channel all/0/1 from flash | | `postfilter <0/1> rate <rate>` | Set postfilter output data rate |
| `save [0/1]` | Save configuration for channel all/0/1 to flash | | `load [0/1]` | Restore configuration for channel all/0/1 from flash |
| `reset` | Reset the device | | `save [0/1]` | Save configuration for channel all/0/1 to flash |
| `dfu` | Reset device and enters USB device firmware update (DFU) mode | | `reset` | Reset the device |
| `ipv4 <X.X.X.X/L> [Y.Y.Y.Y]` | Configure IPv4 address, netmask length, and optional default gateway | | `dfu` | Reset device and enters USB device firmware update (DFU) mode |
| `fan` | Show current fan settings and sensors' measurements | | `ipv4 <X.X.X.X/L> [Y.Y.Y.Y]` | Configure IPv4 address, netmask length, and optional default gateway |
| `fan <value>` | Set fan power with values from 1 to 100 | | `fan` | Show current fan settings and sensors' measurements |
| `fan auto` | Enable automatic fan speed control | | `fan <value>` | Set fan power with values from 1 to 100 |
| `fcurve <a> <b> <c>` | Set fan controller curve coefficients (see *Fan control* section) | | `fan auto` | Enable automatic fan speed control |
| `fcurve default` | Set fan controller curve coefficients to defaults (see *Fan control* section) | | `fcurve <a> <b> <c>` | Set fan controller curve coefficients (see *Fan control* section) |
| `hwrev` | Show hardware revision, and settings related to it | | `fcurve default` | Set fan controller curve coefficients to defaults (see *Fan control* section) |
| `hwrev` | Show hardware revision, and settings related to it |
## USB ## USB