Formatting

pytec/.flake8

@@ -0,0 +1,3 @@
+[flake8]
+max-line-length = 88
+extend-ignore = E203,E701

pytec/autotune.py

@@ -12,16 +12,16 @@ from pytec.client import Client
 
 
 class PIDAutotuneState(Enum):
-    STATE_OFF = 'off'
+    STATE_OFF = "off"
-    STATE_RELAY_STEP_UP = 'relay step up'
+    STATE_RELAY_STEP_UP = "relay step up"
-    STATE_RELAY_STEP_DOWN = 'relay step down'
+    STATE_RELAY_STEP_DOWN = "relay step down"
-    STATE_SUCCEEDED = 'succeeded'
+    STATE_SUCCEEDED = "succeeded"
-    STATE_FAILED = 'failed'
+    STATE_FAILED = "failed"
-    STATE_READY = 'ready'
+    STATE_READY = "ready"
 
 
 class PIDAutotune:
-    PIDParams = namedtuple('PIDParams', ['Kp', 'Ki', 'Kd'])
+    PIDParams = namedtuple("PIDParams", ["Kp", "Ki", "Kd"])
 
     PEAK_AMPLITUDE_TOLERANCE = 0.05
 
@@ -31,13 +31,14 @@ class PIDAutotune:
         "ciancone-marlin": [0.303, 0.1364, 0.0481],
         "pessen-integral": [0.7, 1.75, 0.105],
         "some-overshoot": [0.333, 0.667, 0.111],
-        "no-overshoot": [0.2, 0.4,  0.0667]
+        "no-overshoot": [0.2, 0.4, 0.0667],
     }
 
-    def __init__(self, setpoint, out_step=10, lookback=60,
+    def __init__(
-                 noiseband=0.5, sampletime=1.2):
+        self, setpoint, out_step=10, lookback=60, noiseband=0.5, sampletime=1.2
+    ):
         if setpoint is None:
-            raise ValueError('setpoint must be specified')
+            raise ValueError("setpoint must be specified")
 
         self._inputs = deque(maxlen=round(lookback / sampletime))
         self._setpoint = setpoint
@@ -84,7 +85,7 @@ class PIDAutotune:
         """Get a list of all available tuning rules."""
         return self._tuning_rules.keys()
 
-    def get_pid_parameters(self, tuning_rule='ziegler-nichols'):
+    def get_pid_parameters(self, tuning_rule="ziegler-nichols"):
         """Get PID parameters.
 
         Args:
@@ -97,7 +98,7 @@ class PIDAutotune:
         kd = divisors[2] * self._Ku * self._Pu
         return PIDAutotune.PIDParams(kp, ki, kd)
 
-    def get_tec_pid (self):
+    def get_tec_pid(self):
         divisors = self._tuning_rules["tyreus-luyben"]
         kp = self._Ku * divisors[0]
         ki = divisors[1] * self._Ku / self._Pu
@@ -116,28 +117,34 @@ class PIDAutotune:
         """
         now = time_input * 1000
 
-        if (self._state == PIDAutotuneState.STATE_OFF
+        if (
+            self._state == PIDAutotuneState.STATE_OFF
             or self._state == PIDAutotuneState.STATE_SUCCEEDED
             or self._state == PIDAutotuneState.STATE_FAILED
-                or self._state == PIDAutotuneState.STATE_READY):
+            or self._state == PIDAutotuneState.STATE_READY
+        ):
             self._state = PIDAutotuneState.STATE_RELAY_STEP_UP
 
         self._last_run_timestamp = now
 
         # check input and change relay state if necessary
-        if (self._state == PIDAutotuneState.STATE_RELAY_STEP_UP
+        if (
-                and input_val > self._setpoint + self._noiseband):
+            self._state == PIDAutotuneState.STATE_RELAY_STEP_UP
+            and input_val > self._setpoint + self._noiseband
+        ):
             self._state = PIDAutotuneState.STATE_RELAY_STEP_DOWN
-            logging.debug('switched state: {0}'.format(self._state))
+            logging.debug("switched state: {0}".format(self._state))
-            logging.debug('input: {0}'.format(input_val))
+            logging.debug("input: {0}".format(input_val))
-        elif (self._state == PIDAutotuneState.STATE_RELAY_STEP_DOWN
+        elif (
-                and input_val < self._setpoint - self._noiseband):
+            self._state == PIDAutotuneState.STATE_RELAY_STEP_DOWN
+            and input_val < self._setpoint - self._noiseband
+        ):
             self._state = PIDAutotuneState.STATE_RELAY_STEP_UP
-            logging.debug('switched state: {0}'.format(self._state))
+            logging.debug("switched state: {0}".format(self._state))
-            logging.debug('input: {0}'.format(input_val))
+            logging.debug("input: {0}".format(input_val))
 
         # set output
-        if (self._state == PIDAutotuneState.STATE_RELAY_STEP_UP):
+        if self._state == PIDAutotuneState.STATE_RELAY_STEP_UP:
             self._output = self._initial_output - self._outputstep
         elif self._state == PIDAutotuneState.STATE_RELAY_STEP_DOWN:
             self._output = self._initial_output + self._outputstep
@@ -180,8 +187,8 @@ class PIDAutotune:
             self._peak_count += 1
             self._peaks.append(input_val)
             self._peak_timestamps.append(now)
-            logging.debug('found peak: {0}'.format(input_val))
+            logging.debug("found peak: {0}".format(input_val))
-            logging.debug('peak count: {0}'.format(self._peak_count))
+            logging.debug("peak count: {0}".format(self._peak_count))
 
         # check for convergence of induced oscillation
         # convergence of amplitude assessed on last 4 peaks (1.5 cycles)
@@ -191,20 +198,19 @@ class PIDAutotune:
             abs_max = self._peaks[-2]
             abs_min = self._peaks[-2]
             for i in range(0, len(self._peaks) - 2):
-                self._induced_amplitude += abs(self._peaks[i]
+                self._induced_amplitude += abs(self._peaks[i] - self._peaks[i + 1])
-                                               - self._peaks[i+1])
                 abs_max = max(self._peaks[i], abs_max)
                 abs_min = min(self._peaks[i], abs_min)
 
             self._induced_amplitude /= 6.0
 
             # check convergence criterion for amplitude of induced oscillation
-            amplitude_dev = ((0.5 * (abs_max - abs_min)
+            amplitude_dev = (
-                              - self._induced_amplitude)
+                0.5 * (abs_max - abs_min) - self._induced_amplitude
-                             / self._induced_amplitude)
+            ) / self._induced_amplitude
 
-            logging.debug('amplitude: {0}'.format(self._induced_amplitude))
+            logging.debug("amplitude: {0}".format(self._induced_amplitude))
-            logging.debug('amplitude deviation: {0}'.format(amplitude_dev))
+            logging.debug("amplitude deviation: {0}".format(amplitude_dev))
 
             if amplitude_dev < PIDAutotune.PEAK_AMPLITUDE_TOLERANCE:
                 self._state = PIDAutotuneState.STATE_SUCCEEDED
@@ -218,25 +224,24 @@ class PIDAutotune:
 
         if self._state == PIDAutotuneState.STATE_SUCCEEDED:
             self._output = 0
-            logging.debug('peak finding successful')
+            logging.debug("peak finding successful")
 
             # calculate ultimate gain
-            self._Ku = 4.0 * self._outputstep / \
+            self._Ku = 4.0 * self._outputstep / (self._induced_amplitude * math.pi)
-                (self._induced_amplitude * math.pi)
+            logging.debug("Ku: {0}".format(self._Ku))
-            logging.debug('Ku: {0}'.format(self._Ku))
 
             # calculate ultimate period in seconds
             period1 = self._peak_timestamps[3] - self._peak_timestamps[1]
             period2 = self._peak_timestamps[4] - self._peak_timestamps[2]
             self._Pu = 0.5 * (period1 + period2) / 1000.0
-            logging.debug('Pu: {0}'.format(self._Pu))
+            logging.debug("Pu: {0}".format(self._Pu))
 
             for rule in self._tuning_rules:
                 params = self.get_pid_parameters(rule)
-                logging.debug('rule: {0}'.format(rule))
+                logging.debug("rule: {0}".format(rule))
-                logging.debug('Kp: {0}'.format(params.Kp))
+                logging.debug("Kp: {0}".format(params.Kp))
-                logging.debug('Ki: {0}'.format(params.Ki))
+                logging.debug("Ki: {0}".format(params.Ki))
-                logging.debug('Kd: {0}'.format(params.Kd))
+                logging.debug("Kd: {0}".format(params.Kd))
 
             return True
         return False
@@ -263,16 +268,17 @@ def main():
     data = next(tec.report_mode())
     ch = data[channel]
 
-    tuner = PIDAutotune(target_temperature, output_step,
+    tuner = PIDAutotune(
-                        lookback, noiseband, ch['interval'])
+        target_temperature, output_step, lookback, noiseband, ch["interval"]
+    )
 
     for data in tec.report_mode():
 
         ch = data[channel]
 
-        temperature = ch['temperature']
+        temperature = ch["temperature"]
 
-        if (tuner.run(temperature, ch['time'])):
+        if tuner.run(temperature, ch["time"]):
             break
 
         tuner_out = tuner.output()

pytec/examples/aioexample.py

@@ -1,9 +1,10 @@
 import asyncio
 from pytec.aioclient import Client
 
+
 async def main():
     tec = Client()
-    await tec.start_session() #(host="192.168.1.26", port=23)
+    await tec.start_session()  # (host="192.168.1.26", port=23)
     await tec.set_param("s-h", 1, "t0", 20)
     print(await tec.get_pwm())
     print(await tec.get_pid())
@@ -13,4 +14,5 @@ async def main():
     async for data in tec.report_mode():
         print(data)
 
+
 asyncio.run(main())

pytec/examples/example.py

@@ -1,6 +1,6 @@
 from pytec.client import Client
 
-tec = Client() #(host="localhost", port=6667)
+tec = Client()  # (host="localhost", port=6667)
 tec.set_param("s-h", 1, "t0", 20)
 print(tec.get_pwm())
 print(tec.get_pid())

pytec/plot.py

@@ -7,9 +7,10 @@ from pytec.client import Client
 TIME_WINDOW = 300.0
 
 tec = Client()
-target_temperature = tec.get_pid()[0]['target']
+target_temperature = tec.get_pid()[0]["target"]
 print("Channel 0 target temperature: {:.3f}".format(target_temperature))
 
+
 class Series:
     def __init__(self, conv=lambda x: x):
         self.conv = conv
@@ -27,24 +28,26 @@ class Series:
         self.x_data = self.x_data[drop:]
         self.y_data = self.y_data[drop:]
 
+
 series = {
     # 'adc': Series(),
     # 'sens': Series(lambda x: x * 0.0001),
-    'temperature': Series(),
+    "temperature": Series(),
     # 'i_set': Series(),
-    'pid_output': Series(),
+    "pid_output": Series(),
     # 'vref': Series(),
     # 'dac_value': Series(),
     # 'dac_feedback': Series(),
     # 'i_tec': Series(),
-    'tec_i': Series(),
+    "tec_i": Series(),
-    'tec_u_meas': Series(),
+    "tec_u_meas": Series(),
     # 'interval': Series(),
 }
 series_lock = Lock()
 
 quit = False
 
+
 def recv_data(tec):
     global last_packet_time
     for data in tec.report_mode():
@@ -55,22 +58,24 @@ def recv_data(tec):
                 if k in ch0:
                     v = ch0[k]
                     if type(v) is float:
-                        s.append(ch0['time'], v)
+                        s.append(ch0["time"], v)
         finally:
             series_lock.release()
 
         if quit:
             break
 
+
 thread = Thread(target=recv_data, args=(tec,))
 thread.start()
 
 fig, ax = plt.subplots()
 
 for k, s in series.items():
-    s.plot, = ax.plot([], [], label=k)
+    (s.plot,) = ax.plot([], [], label=k)
 legend = ax.legend()
 
+
 def animate(i):
     min_x, max_x, min_y, max_y = None, None, None, None
 
@@ -120,8 +125,8 @@ def animate(i):
     legend.remove()
     legend = ax.legend()
 
-ani = animation.FuncAnimation(
+
-    fig, animate, interval=1, blit=False, save_count=50)
+ani = animation.FuncAnimation(fig, animate, interval=1, blit=False, save_count=50)
 
 plt.show()
 quit = True

pytec/pyproject.toml

@@ -16,3 +16,6 @@ tec_qt = "tec_qt:main"
 [tool.setuptools]
 packages.find = {}
 py-modules = ["autotune", "plot", "tec_qt"]
+
+[tool.pylint.format]
+max-line-length = "88"

pytec/pytec/aioclient.py

@@ -2,12 +2,15 @@ import asyncio
 import json
 import logging
 
+
 class CommandError(Exception):
     pass
 
+
 class StoppedConnecting(Exception):
     pass
 
+
 class Client:
     def __init__(self):
         self._reader = None
@@ -17,7 +20,7 @@ class Client:
         self._report_mode_on = False
         self.timeout = None
 
-    async def start_session(self, host='192.168.1.26', port=23, timeout=None):
+    async def start_session(self, host="192.168.1.26", port=23, timeout=None):
         """Start session to Thermostat at specified host and port.
         Throws StoppedConnecting if disconnect was called while connecting.
         Throws asyncio.TimeoutError if timeout was exceeded.
@@ -69,15 +72,21 @@ class Client:
         for pwm_channel in pwm_report:
             for limit in ["max_i_neg", "max_i_pos", "max_v"]:
                 if pwm_channel[limit]["value"] == 0.0:
-                    logging.warning("`{}` limit is set to zero on channel {}".format(limit, pwm_channel["channel"]))
+                    logging.warning(
+                        "`{}` limit is set to zero on channel {}".format(
+                            limit, pwm_channel["channel"]
+                        )
+                    )
 
     async def _read_line(self):
         # read 1 line
-        chunk = await asyncio.wait_for(self._reader.readline(), self.timeout) # Only wait for response until timeout
+        chunk = await asyncio.wait_for(
-        return chunk.decode('utf-8', errors='ignore')
+            self._reader.readline(), self.timeout
+        )  # Only wait for response until timeout
+        return chunk.decode("utf-8", errors="ignore")
 
     async def _read_write(self, command):
-        self._writer.write(((" ".join(command)).strip() + "\n").encode('utf-8'))
+        self._writer.write(((" ".join(command)).strip() + "\n").encode("utf-8"))
         await self._writer.drain()
 
         return await self._read_line()
@@ -256,7 +265,7 @@ class Client:
         The client is disconnected as the TCP session is terminated.
         """
         async with self._command_lock:
-            self._writer.write("reset\n".encode('utf-8'))
+            self._writer.write("reset\n".encode("utf-8"))
             await self._writer.drain()
 
         await self.end_session()
@@ -269,11 +278,11 @@ class Client:
         power-cycling.
         """
         async with self._command_lock:
-            self._writer.write("dfu\n".encode('utf-8'))
+            self._writer.write("dfu\n".encode("utf-8"))
             await self._writer.drain()
 
         await self.end_session()
 
     async def ipv4(self):
         """Get the IPv4 settings of the Thermostat"""
-        return await self._command('ipv4')
+        return await self._command("ipv4")

pytec/pytec/client.py

@@ -2,9 +2,11 @@ import socket
 import json
 import logging
 
+
 class CommandError(Exception):
     pass
 
+
 class Client:
     def __init__(self, host="192.168.1.26", port=23, timeout=None):
         self._socket = socket.create_connection((host, port), timeout)
@@ -20,7 +22,11 @@ class Client:
         for pwm_channel in pwm_report:
             for limit in ["max_i_neg", "max_i_pos", "max_v"]:
                 if pwm_channel[limit]["value"] == 0.0:
-                    logging.warning("`{}` limit is set to zero on channel {}".format(limit, pwm_channel["channel"]))
+                    logging.warning(
+                        "`{}` limit is set to zero on channel {}".format(
+                            limit, pwm_channel["channel"]
+                        )
+                    )
 
     def _read_line(self):
         # read more lines
@@ -28,7 +34,7 @@ class Client:
             chunk = self._socket.recv(4096)
             if not chunk:
                 return None
-            buf = self._lines[-1] + chunk.decode('utf-8', errors='ignore')
+            buf = self._lines[-1] + chunk.decode("utf-8", errors="ignore")
             self._lines = buf.split("\n")
 
         line = self._lines[0]
@@ -36,7 +42,7 @@ class Client:
         return line
 
     def _command(self, *command):
-        self._socket.sendall((" ".join(command) + "\n").encode('utf-8'))
+        self._socket.sendall((" ".join(command) + "\n").encode("utf-8"))
 
         line = self._read_line()
         response = json.loads(line)

pytec/pytec/gui/model/pid_autotuner.py

@@ -48,7 +48,11 @@ class PIDAutoTuner(QObject):
 
             ch = channel_report["channel"]
             match self.autotuners[ch].state():
-                case PIDAutotuneState.STATE_READY | PIDAutotuneState.STATE_RELAY_STEP_UP | PIDAutotuneState.STATE_RELAY_STEP_DOWN:
+                case (
+                    PIDAutotuneState.STATE_READY
+                    | PIDAutotuneState.STATE_RELAY_STEP_UP
+                    | PIDAutotuneState.STATE_RELAY_STEP_DOWN
+                ):
                     self.autotuners[ch].run(
                         channel_report["temperature"], channel_report["time"]
                     )

pytec/pytec/gui/view/live_plot_view.py

@@ -67,9 +67,7 @@ class _TecGraphs:
         self._t_line = self._t_widget.getPlotItem().addLine(label="{value} °C")
         self._t_line.setVisible(False)
         # Hack for keeping setpoint line in plot range
-        self._t_setpoint_plot = (
+        self._t_setpoint_plot = LiveLinePlot()
-            LiveLinePlot()
-        )
 
         for graph in t_widget, i_widget:
             time_axis = LiveAxis(

pytec/pytec/gui/view/waitingspinnerwidget.py

@@ -67,16 +67,30 @@ class QtWaitingSpinner(QWidget):
         painter.setPen(Qt.PenStyle.NoPen)
         for i in range(0, self._numberOfLines):
             painter.save()
-            painter.translate(self._innerRadius + self._lineLength, self._innerRadius + self._lineLength)
+            painter.translate(
+                self._innerRadius + self._lineLength,
+                self._innerRadius + self._lineLength,
+            )
             rotateAngle = float(360 * i) / float(self._numberOfLines)
             painter.rotate(rotateAngle)
             painter.translate(self._innerRadius, 0)
-            distance = self.lineCountDistanceFromPrimary(i, self._currentCounter, self._numberOfLines)
+            distance = self.lineCountDistanceFromPrimary(
-            color = self.currentLineColor(distance, self._numberOfLines, self._trailFadePercentage,
+                i, self._currentCounter, self._numberOfLines
-                                          self._minimumTrailOpacity, self._color)
+            )
+            color = self.currentLineColor(
+                distance,
+                self._numberOfLines,
+                self._trailFadePercentage,
+                self._minimumTrailOpacity,
+                self._color,
+            )
             painter.setBrush(color)
-            painter.drawRoundedRect(QRect(0, int(-self._lineWidth / 2), self._lineLength, self._lineWidth), self._roundness,
+            painter.drawRoundedRect(
-                                    self._roundness, Qt.SizeMode.RelativeSize)
+                QRect(0, int(-self._lineWidth / 2), self._lineLength, self._lineWidth),
+                self._roundness,
+                self._roundness,
+                Qt.SizeMode.RelativeSize,
+            )
             painter.restore()
 
     def start(self):
@@ -160,7 +174,9 @@ class QtWaitingSpinner(QWidget):
         self.setFixedSize(self.size, self.size)
 
     def updateTimer(self):
-        self._timer.setInterval(int(1000 / (self._numberOfLines * self._revolutionsPerSecond)))
+        self._timer.setInterval(
+            int(1000 / (self._numberOfLines * self._revolutionsPerSecond))
+        )
 
     def lineCountDistanceFromPrimary(self, current, primary, totalNrOfLines):
         distance = primary - current
@@ -168,7 +184,9 @@ class QtWaitingSpinner(QWidget):
             distance += totalNrOfLines
         return distance
 
-    def currentLineColor(self, countDistance, totalNrOfLines, trailFadePerc, minOpacity, colorinput):
+    def currentLineColor(
+        self, countDistance, totalNrOfLines, trailFadePerc, minOpacity, colorinput
+    ):
         color = QColor(colorinput)
         if countDistance == 0:
             return color
@@ -186,7 +204,7 @@ class QtWaitingSpinner(QWidget):
         return color
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     app = QApplication([])
     waiting_spinner = QtWaitingSpinner()
     waiting_spinner.show()

pytec/tec_qt.py

@@ -304,7 +304,11 @@ class MainWindow(QtWidgets.QMainWindow):
             case PIDAutotuneState.STATE_OFF | PIDAutotuneState.STATE_FAILED:
                 self.autotuners.load_params_and_set_ready(ch)
 
-            case PIDAutotuneState.STATE_READY | PIDAutotuneState.STATE_RELAY_STEP_UP | PIDAutotuneState.STATE_RELAY_STEP_DOWN:
+            case (
+                PIDAutotuneState.STATE_READY
+                | PIDAutotuneState.STATE_RELAY_STEP_UP
+                | PIDAutotuneState.STATE_RELAY_STEP_DOWN
+            ):
                 await self.autotuners.stop_pid_from_running(ch)
                 # To Update the UI elements
                 self.pid_autotune_handler([])
@@ -318,7 +322,11 @@ class MainWindow(QtWidgets.QMainWindow):
                     self.ctrl_panel_view.change_params_title(
                         ch, ("PID Config", "PID Auto Tune", "Run"), "Run"
                     )
-                case PIDAutotuneState.STATE_READY | PIDAutotuneState.STATE_RELAY_STEP_UP | PIDAutotuneState.STATE_RELAY_STEP_DOWN:
+                case (
+                    PIDAutotuneState.STATE_READY
+                    | PIDAutotuneState.STATE_RELAY_STEP_UP
+                    | PIDAutotuneState.STATE_RELAY_STEP_DOWN
+                ):
                     self.ctrl_panel_view.change_params_title(
                         ch, ("PID Config", "PID Auto Tune", "Run"), "Stop"
                     )
@@ -333,7 +341,8 @@ class MainWindow(QtWidgets.QMainWindow):
 
                 case PIDAutotuneState.STATE_FAILED:
                     self.info_box.display_info_box(
-                        "PID Autotune Failed", f"Channel {ch} PID Autotune has failed."
+                        "PID Autotune Failed",
+                        f"Channel {ch} PID Autotune has failed.",
                     )
                     self.info_box.show()
 
@@ -427,7 +436,9 @@ async def coro_main():
     app = QtWidgets.QApplication.instance()
     app.aboutToQuit.connect(app_quit_event.set)
     app.setWindowIcon(
-        QtGui.QIcon(str(importlib.resources.files("pytec.gui.resources").joinpath("artiq.ico")))
+        QtGui.QIcon(
+            str(importlib.resources.files("pytec.gui.resources").joinpath("artiq.ico"))
+        )
     )
 
     main_window = MainWindow(args)