1
0
forked from M-Labs/thermostat

README: Add full path to compiled binary

This commit is contained in:
atse 2024-01-30 16:05:31 +08:00
parent b037e8e4ca
commit 10b6406ad6

View File

@ -45,7 +45,7 @@ There are several options for flashing Thermostat. DFU requires only a micro-USB
### dfu-util on Linux ### dfu-util on Linux
* Install the DFU USB tool (dfu-util). * Install the DFU USB tool (dfu-util).
* Convert firmware from ELF to BIN: `arm-none-eabi-objcopy -O binary thermostat thermostat.bin` (you can skip this step if using the BIN from Hydra) * Convert firmware from ELF to BIN: `arm-none-eabi-objcopy -O binary target/thumbv7em-none-eabihf/release/thermostat thermostat.bin` (you can skip this step if using the BIN from Hydra)
* Connect to the Micro USB connector to Thermostat below the RJ45. * Connect to the Micro USB connector to Thermostat below the RJ45.
* Add jumper to Thermostat v2.0 across 2-pin jumper adjacent to JTAG connector. * Add jumper to Thermostat v2.0 across 2-pin jumper adjacent to JTAG connector.
* Cycle board power to put it in DFU update mode * Cycle board power to put it in DFU update mode