use libregister::{RegisterR, RegisterW, RegisterRW}; use crate::{print, println}; use super::slcr::{self, DdriobVrefSel}; use super::clocks::{Clocks, source::{DdrPll, ClockSource}}; mod regs; #[cfg(feature = "target_zc706")] /// Micron MT41J256M8HX-15E: 667 MHz DDR3 const DDR_FREQ: u32 = 666_666_666; #[cfg(feature = "target_cora_z7_10")] /// Micron MT41K256M16HA-125: 800 MHz DDR3L, max supported 533 MHz const DDR_FREQ: u32 = 525_000_000; /// MT41K256M16HA-125 const DCI_FREQ: u32 = 10_000_000; pub struct DdrRam { regs: &'static mut regs::RegisterBlock, } impl DdrRam { pub fn new() -> Self { let clocks = Self::clock_setup(); Self::calibrate_iob_impedance(&clocks); Self::configure_iob(); let regs = unsafe { regs::RegisterBlock::new() }; let mut ddr = DdrRam { regs }; ddr.reset_ddrc(); ddr } /// Zynq-7000 AP SoC Technical Reference Manual: /// 10.6.1 DDR Clock Initialization fn clock_setup() -> Clocks { DdrPll::setup(2 * DDR_FREQ); let clocks = Clocks::get(); println!("Clocks: {:?}", clocks); let ddr3x_clk_divisor = 2; let ddr2x_clk_divisor = 3; println!("DDR 3x/2x clocks: {}/{}", clocks.ddr / u32::from(ddr3x_clk_divisor), clocks.ddr / u32::from(ddr2x_clk_divisor)); slcr::RegisterBlock::unlocked(|slcr| { slcr.ddr_clk_ctrl.write( slcr::DdrClkCtrl::zeroed() .ddr_2xclkact(true) .ddr_3xclkact(true) .ddr_2xclk_divisor(ddr2x_clk_divisor) .ddr_3xclk_divisor(ddr3x_clk_divisor) ); }); clocks } /// Zynq-7000 AP SoC Technical Reference Manual: /// 10.6.2 DDR IOB Impedance Calibration fn calibrate_iob_impedance(clocks: &Clocks) { let divisor0 = ((DCI_FREQ - 1 + clocks.ddr) / DCI_FREQ) .max(1).min(63) as u8; let divisor1 = ((DCI_FREQ - 1 + clocks.ddr) / DCI_FREQ / u32::from(divisor0)) .max(1).min(63) as u8; println!("DDR DCI clock: {} Hz", clocks.ddr / u32::from(divisor0) / u32::from(divisor1)); slcr::RegisterBlock::unlocked(|slcr| { // Step 1. slcr.dci_clk_ctrl.write( slcr::DciClkCtrl::zeroed() .clkact(true) .divisor0(divisor0) .divisor1(divisor1) ); // Step 2.a. slcr.ddriob_dci_ctrl.modify(|_, w| w.reset(false) ); slcr.ddriob_dci_ctrl.modify(|_, w| w.reset(true) ); // Step 3.b. for DDR3/DDR3L slcr.ddriob_dci_ctrl.modify(|_, w| w.nref_opt1(0) .nref_opt2(0) .nref_opt4(1) .pref_opt1(0) .pref_opt2(0) ); // Step 2.c. slcr.ddriob_dci_ctrl.modify(|_, w| w.update_control(false) ); // Step 2.d. slcr.ddriob_dci_ctrl.modify(|_, w| w.enable(true) ); // Step 2.e. while ! slcr.ddriob_dci_status.read().done() {} }); } /// Zynq-7000 AP SoC Technical Reference Manual: /// 10.6.3 DDR IOB Configuration fn configure_iob() { slcr::RegisterBlock::unlocked(|slcr| { let addr_config = slcr::DdriobConfig::zeroed() .output_en(slcr::DdriobOutputEn::Obuf); slcr.ddriob_addr0.write(addr_config.clone()); slcr.ddriob_addr1.write(addr_config); #[cfg(feature = "target_zc706")] let data0_config = slcr::DdriobConfig::zeroed() .inp_type(slcr::DdriobInputType::VrefDifferential) .term_en(true) .dci_type(slcr::DdriobDciType::Termination) .output_en(slcr::DdriobOutputEn::Obuf); #[cfg(feature = "target_zc706")] let data1_config = data0_config.clone(); #[cfg(feature = "target_cora_z7_10")] let data0_config = slcr::DdriobConfig::zeroed() .inp_type(slcr::DdriobInputType::VrefDifferential) .term_en(true) .dci_type(slcr::DdriobDciType::Termination) .output_en(slcr::DdriobOutputEn::Obuf); #[cfg(feature = "target_cora_z7_10")] let data1_config = slcr::DdriobConfig::zeroed() .pullup_en(true); slcr.ddriob_data0.write(data0_config); slcr.ddriob_data1.write(data1_config); #[cfg(feature = "target_zc706")] let diff0_config = slcr::DdriobConfig::zeroed() .inp_type(slcr::DdriobInputType::Differential) .term_en(true) .dci_type(slcr::DdriobDciType::Termination) .output_en(slcr::DdriobOutputEn::Obuf); #[cfg(feature = "target_zc706")] let diff1_config = diff0_config.clone(); #[cfg(feature = "target_cora_z7_10")] let diff0_config = slcr::DdriobConfig::zeroed() .inp_type(slcr::DdriobInputType::Differential) .term_en(true) .dci_type(slcr::DdriobDciType::Termination) .output_en(slcr::DdriobOutputEn::Obuf); #[cfg(feature = "target_cora_z7_10")] let diff1_config = slcr::DdriobConfig::zeroed() .pullup_en(true); slcr.ddriob_diff0.write(diff0_config); slcr.ddriob_diff1.write(diff1_config); slcr.ddriob_clock.write( slcr::DdriobConfig::zeroed() .output_en(slcr::DdriobOutputEn::Obuf) ); unsafe { // Not documented in Technical Reference Manual slcr.ddriob_drive_slew_addr.write(0x0018C61C); slcr.ddriob_drive_slew_data.write(0x00F9861C); slcr.ddriob_drive_slew_diff.write(0x00F9861C); slcr.ddriob_drive_slew_clock.write(0x00F9861C); } // Enable external V[REF] #[cfg(feature = "target_cora_z7_10")] slcr.ddriob_ddr_ctrl.modify(|_, w| w .vref_int_en(false) .vref_ext_en_lower(true) .vref_ext_en_upper(false) ); #[cfg(feature = "target_zc706")] slcr.ddriob_ddr_ctrl.modify(|_, w| w .vref_int_en(true) .vref_sel(DdriobVrefSel::Vref0_75V) .vref_ext_en_lower(false) .vref_ext_en_upper(false) ); }); } /// Reset DDR controller fn reset_ddrc(&mut self) { #[cfg(feature = "target_zc706")] let width = regs::DataBusWidth::Width32bit; #[cfg(feature = "target_cora_z7_10")] let width = regs::DataBusWidth::Width16bit; self.regs.ddrc_ctrl.modify(|_, w| w .soft_rstb(false) .powerdown_en(false) .data_bus_width(width) ); self.regs.ddrc_ctrl.modify(|_, w| w .soft_rstb(true) .powerdown_en(false) .data_bus_width(width) ); while self.status() == regs::ControllerStatus::Init {} } pub fn status(&self) -> regs::ControllerStatus { self.regs.mode_sts_reg.read().operating_mode() } pub fn ptr(&mut self) -> *mut T { 0x0010_0000 as *mut _ } pub fn size(&self) -> usize { #[cfg(feature = "target_zc706")] let megabytes = 511; #[cfg(feature = "target_cora_z7_10")] let megabytes = 511; megabytes * 1024 * 1024 } pub fn memtest(&mut self) { let slice = unsafe { core::slice::from_raw_parts_mut(self.ptr(), self.size()) }; let patterns: &'static [u32] = &[0xffff_ffff, 0x5555_5555, 0xaaaa_aaaa, 0]; let mut expected = None; for (i, pattern) in patterns.iter().enumerate() { println!("memtest phase {} (status: {:?})", i, self.status()); for megabyte in 0..=(slice.len() / (1024 * 1024)) { let start = megabyte * 1024 * 1024 / 4; let end = ((megabyte + 1) * 1024 * 1024 / 4).min(slice.len()); for b in slice[start..end].iter_mut() { expected.map(|expected| { let read: u32 = *b; if read != expected { println!("{:08X}: expected {:08X}, read {:08X}", b as *mut _ as usize, expected, read); } }); *b = *pattern; } print!("\r{} MB", megabyte); } println!(" Ok"); expected = Some(*pattern); } } }