drafting

1124.tex

@@ -157,10 +157,9 @@
     \caption{Kasli 2.0 card}
 \end{figure}
 
-
 \begin{figure}[hbt!]
     \centering
-    \includegraphics[angle=90,height=0.9in]{Kasli_FP.pdf}
+    \includegraphics[angle=90,height=0.9in]{fp1124.pdf}
     \caption{Kasli 2.0 front panel}
 \end{figure}
 

1550.tex

@@ -0,0 +1,118 @@
+\input{preamble.tex}
+\graphicspath{{images}, {images/1550}}
+
+\title{1550 Laser Diode Driver Kirdy}
+\author{M-Labs Limited}
+\date{January 2025}
+\revision{Revision 1}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+\maketitle
+
+\section{Features}
+
+    \begin{itemize}
+        \item{300mA max output current, 20-bit resolution}
+        \item{Low noise current source}
+        \item{18MHz-bandwidth modulation input}
+        \item{Monitor photodiode and LD protection}
+        \item{Built-in sub-mK stability temperature controller}
+        \item{Full digital control over Ethernet}
+    \end{itemize}
+
+\section{Applications}
+
+    \begin{itemize}
+        \item{High-precision laser driver}
+        \item{Suitable for use with adapter and preinstalled laser assembly or with external laser heads}
+        \item{Spectroscopy and oher atomic physics applications}
+    \end{itemize}
+
+\section{General Description}
+
+The 1550 Laser Diode Driver Kirdy is a 8hp EEM form factor module, part of the Sinara open hardware family. It serves as a precision laser diode driver, featuring a low-noise current source, low- and high-frequency modulation inputs, and full digital control over Ethernet. Soft turn-on, laser power monitoring with a user-defined trip point, overtemperature protection, and a protection relay minimize the risk of damage to the laser diode. 
+
+1550 Kirdy supports both low-frequency modulation, suitable for laser locks and linewidth reduction, as well as RF modulation injected directly into the diode, typically to inject sidebands into the beam and implement stabilization schemes such as Pound-Drever-Hall and modulation transfer spectroscopy. 
+
+% Switch to next column
+\vfill\break
+
+%\begin{figure}[h]
+%    \centering
+%    \scalebox{1.15}{
+%    \begin{circuitikz}[european, every label/.append style={align=center}]
+%        \begin{scope}[]
+%            % if applicable
+%        \end{scope}
+%    \end{circuitikz}
+%    }
+%
+%    \caption{Simplified Block Diagram}
+%\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    \includegraphics[height=2.5in]{photo1550.jpg}
+    \caption{Kirdy card photo}
+    \includegraphics[height=3in, angle=90]{fp1550.pdf}
+    \caption{Kirdy front panel}
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\sourcesection{1550 Laser Diode Driver Kirdy}{https://git.m-labs.hk/sinara-hw/kirdy} The associated adapter can be found at the repository /url{https://git.m-labs.hk/sinara-hw/kirdyAdapter/src/branch/master}. 
+
+\section{Adapter and Laser Options}
+
+An optional adapter allows compact lasers in butterfly packages to be mounted directly onto 1550 Kirdy, with a fibre-optic output in the front panel. Multiple single-frequency narrow-linewidth lasers are currently available as preinstalled options for order.
+
+Alternatively, Kirdy accepts laser signals broken out to the front panel and is suitable for use in driving external laser heads, including commercial or custom ECDLs (with additional piezo driver) or injection-locked Fabry-Perot diodes.
+
+\section{Specifications}
+
+microcontroller datasheet: \url{https://www.st.com/resource/en/datasheet/DM00037051.pdf}
+
+1550 Kirdy supports Power-over-Ethernet. Alternatively, power can be provided via 12V DC input in front panel. 
+
+300mA max output
+4V compliance
+
+20 bit DAC control, 50Hz bandwidth
+300pA/rt Hz current noise @ 1kHz
+300nA RMS Noise (10Hz - 1MHz)
+
+Laser power monitor
+
+    0 - 2.5mA Photodiode current monitoring
+
+TEC Controller
+
+    1A max output
+    5V compliance
+    +- 1mK stability
+
+\section{Selecting modulation gain}
+
+DC to 10MHz modulation input (+/- 1V max) with selectable modulation gains
+    0.25mA/V
+    2.5mA/V
+    25mA/V
+
+\section{Firmware and Linien}
+
+1550 Kirdy features front panel Ethernet and USB-C. Either DFU or OpenOCD can be used to flash firmware; OpenOCD however requires a JTAG adapter.
+
+It can be connected in particular to the Sinara Fast-Servo and used with the Linien application that enables easy locking of lasers to spectral lines.
+
+https://github.com/linien-org/linien
+
+https://git.m-labs.hk/M-Labs/nix-servo
+
+\ordersection{1550 Laser Diode Driver Kirdy}. 
+
+\finalfootnote
+
+\end{document}

4459.tex

@@ -0,0 +1,64 @@
+\input{preamble.tex}
+\graphicspath{{images/4459}, {images}}
+
+\title{4459 PDH Lock Generator Pounder}
+\author{M-Labs Limited}
+\date{January 2025}
+\revision{Revision 0}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+
+\maketitle
+
+\section{Features}
+
+    \begin{itemize}
+        \item{features}
+    \end{itemize}
+
+\section{Applications}
+
+    \begin{itemize}
+        \item{applications}
+    \end{itemize}
+
+\section{General Description}
+
+% Switch to next column
+\vfill\break
+
+%\begin{figure}[h]
+%    \centering
+%    \scalebox{1.15}{
+%    \begin{circuitikz}[european, every label/.append style={align=center}]
+%        \begin{scope}[]
+%            % if applicable
+%        \end{scope}
+%    \end{circuitikz}
+%    }
+
+%    \caption{Simplified Block Diagram}
+%\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    \includegraphics[height=2.5in]{photo4459.jpg}
+    \caption{Pounder + Stabilizer cards}
+    \includegraphics[height=3in, angle=90]{fp4459.pdf} 
+    \caption{Pounder + Stabilizer front panel}
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\sourcesectiond{4459 PDH Lock Generator Pounder}{Stabilizer}{https://github.com/sinara-hw/Pounder}{https://github.com/sinara-hw/Stabilizer}
+
+\section{Specifications}
+
+\ordersection{4459 Pounder + Stabilizer}
+
+\finalfootnote
+
+\end{document}

4624.tex

@@ -0,0 +1,63 @@
+\input{preamble.tex}
+\graphicspath{{images}}
+
+\title{4624 AWG Phaser}
+\author{M-Labs Limited}
+\date{December 2024}
+\revision{Revision 0}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+\maketitle
+
+\section{Features}
+
+\begin{itemize}
+    \item{features}
+\end{itemize}
+
+\section{Applications}
+
+\begin{itemize}
+    \item{applications}
+\end{itemize}
+
+\section{General Description}
+
+% Switch to next column
+\vfill\break
+
+\begin{figure}[h]
+    \centering
+    \scalebox{1.15}{
+    \begin{circuitikz}[european, every label/.append style={align=center}]
+        \begin{scope}[]
+            % if applicable
+        \end{scope}
+    \end{circuitikz}
+    }
+
+    \caption{Simplified Block Diagram}
+\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    % card photo
+    % front panel
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\section{Specifications}
+
+\newpage
+
+\section{Example ARTIQ code}
+\section*{}
+\vspace*{\fill}
+
+\finalfootnote
+
+\end{document}

5538.tex

@@ -0,0 +1,89 @@
+\input{preamble.tex}
+\graphicspath{{images/5538}{images}}
+
+\title{5538 MCX-TTL}
+\author{M-Labs Limited}
+\date{January 2025}
+\revision{Revision 0}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+\maketitle
+
+\section{Features}
+
+\begin{itemize}
+    \item{32 channels}
+    \item{Internal IDC connector}
+    \item{External MCX connectors}
+\end{itemize}
+
+\section{Applications}
+
+\begin{itemize}
+    \item{Break out analog signals}
+    \item{MCX adapter for: \begin{itemize}
+        \item{5432 DAC Zotino}
+        \item{5632 DAC Fastino}
+    \end{itemize}}
+    \item{Convert from/to HD68 with 5568 HD68-IDC}
+    
+\end{itemize}
+
+\section{General Description}
+The 5538 MCX-IDC card is a 8hp EEM Module, part of the ARTIQ/Sinara family. It is capable of breaking out analog signals from IDC connectors to MCX connectors. IDC connectors can be found on 5432 DAC Zotino, 5632 DAC Fastino and 5568 HD68-IDC. 
+
+One card provides 32 channels, enough to break out all channels of 5432 DAC Zotino, 5632 DAC Fastino or 5568 HD68-IDC.
+
+% Switch to next column
+\vfill\break
+%\begin{figure}[h]
+%    \centering
+%    \scalebox{1.15}{
+%    \begin{circuitikz}[european, every label/.append style={align=center}]
+%        \begin{scope}[]
+%            % if applicable
+%        \end{scope}
+%    \end{circuitikz}
+%    }
+
+%    \caption{Simplified Block Diagram}
+%\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    %\includegraphics[height=2.5in]{photo5538.jpg}
+    \caption{MCX-IDC card}
+    %\includegraphics[height=2.5in, angle=90]{fp5538.pdf} 
+    \caption{MCX-IDC front panel}
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\sourcesection{5538 MCX-IDC}{https://github.com/sinara-hw/IDC_MCX_Adapter}
+
+\section{Electrical Specifications}
+
+    \begin{table}[h]
+        \centering
+        \begin{threeparttable}
+        \caption{Electrical Specifications}
+        \begin{tabularx}{0.65\textwidth}{l | c | c | X}
+            \thickhline
+            \textbf{Parameter} & \textbf{Max. Value} & \textbf{Unit} & \textbf{Conditions} \\
+            \thickhline
+        \end{tabularx}
+        \end{threeparttable}
+    \end{table}
+
+\section{Channel Mapping}
+
+% ? 
+
+\ordersection{5538 MCX-IDC}
+
+\finalfootnote
+
+\end{document}

5632.tex

@@ -0,0 +1,63 @@
+\input{preamble.tex}
+\graphicspath{{images/5632}, {images}}
+
+\title{5632 DAC Fastino}
+\author{M-Labs Limited}
+\date{January 2025}
+\revision{Revision 0}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+\maketitle
+
+\section{Features}
+
+    \begin{itemize}
+        \item{features}
+    \end{itemize}
+
+\section{Applications}
+
+    \begin{itemize}
+        \item{applications}
+    \end{itemize}
+
+\section{General Description}
+
+% Switch to next column
+\vfill\break
+
+%\begin{figure}[h]
+%    \centering
+%    \scalebox{1.15}{
+%    \begin{circuitikz}[european, every label/.append style={align=center}]
+%        \begin{scope}[]
+%            % if applicable
+%        \end{scope}
+%    \end{circuitikz}
+%    }
+
+%    \caption{Simplified Block Diagram}
+%\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    \includegraphics[height=2.25in]{photo5632.jpg}
+    \caption{Fastino card}
+    \includegraphics[height=3in, angle=90]{fp5632.pdf} 
+    \caption{Fastino front panel}
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\sourcesection{5632 DAC Fastino}{https://github.com/sinara-hw/Fastino}
+
+\section{Specifications}
+
+\ordersection{5632 DAC Fastino}
+
+\finalfootnote
+
+\end{document}

5633.tex

@@ -0,0 +1,63 @@
+\input{preamble.tex}
+\graphicspath{{images/5633}, {images}}
+
+\title{5633 HV Amplifier}
+\author{M-Labs Limited}
+\date{January 2025}
+\revision{Revision 0}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+\maketitle
+
+\section{Features}
+
+    \begin{itemize}
+        \item{features}
+    \end{itemize}
+
+\section{Applications}
+
+    \begin{itemize}
+        \item{applications}
+    \end{itemize}
+
+\section{General Description}
+
+% Switch to next column
+\vfill\break
+
+%\begin{figure}[h]
+%    \centering
+%    \scalebox{1.15}{
+%    \begin{circuitikz}[european, every label/.append style={align=center}]
+%        \begin{scope}[]
+%            % if applicable
+%        \end{scope}
+%    \end{circuitikz}
+%    }
+
+%    \caption{Simplified Block Diagram}
+%\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    \includegraphics[height=2.25in]{photo5633.jpg}
+    \caption{HV Amplifier card}
+    \includegraphics[height=3in, angle=90]{fp5633.pdf} 
+    \caption{HV Amplifier front panel}
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\sourcesection{5633 HV Amplifier}{https://github.com/sinara-hw/HVAMP_32}
+
+\section{Specifications}
+
+\ordersection{5633 HV Amplifier}
+
+\finalfootnote
+
+\end{document}

6302.tex

@@ -0,0 +1,63 @@
+\input{preamble.tex}
+\graphicspath{{images/6302}, {images}}
+
+\title{6302 Grabber}
+\author{M-Labs Limited}
+\date{January 2025}
+\revision{Revision 0}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+\maketitle
+
+\section{Features}
+
+    \begin{itemize}
+        \item{features}
+    \end{itemize}
+
+\section{Applications}
+
+    \begin{itemize}
+        \item{applications}
+    \end{itemize}
+
+\section{General Description}
+
+% Switch to next column
+\vfill\break
+
+%\begin{figure}[h]
+%    \centering
+%    \scalebox{1.15}{
+%    \begin{circuitikz}[european, every label/.append style={align=center}]
+%        \begin{scope}[]
+%            % if applicable
+%        \end{scope}
+%    \end{circuitikz}
+%    }
+
+%    \caption{Simplified Block Diagram}
+%\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    \includegraphics[height=3in, angle=90]{photo6302.jpg}
+    \caption{Grabber card}
+    \includegraphics[height=3in, angle=90]{fp6302.pdf} 
+    \caption{Grabber front panel}
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\sourcesection{6302 Grabber}{https://github.com/sinara-hw/Grabber}
+
+\section{Specifications}
+
+\ordersection{6302 Grabber}
+
+\finalfootnote
+
+\end{document}

8451-8453.tex

@@ -0,0 +1,66 @@
+\input{preamble.tex}
+\graphicspath{{images/8451-8453}, {images}}
+
+\title{8451 Thermostat / 8453 Thermostat EEM}
+\author{M-Labs Limited}
+\date{January 2025}
+\revision{Revision 0}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+\maketitle
+
+\section{Features}
+
+    \begin{itemize}
+        \item{features}
+    \end{itemize}
+
+\section{Applications}
+
+    \begin{itemize}
+        \item{applications}
+    \end{itemize}
+
+\section{General Description}
+
+% Switch to next column
+\vfill\break
+
+%\begin{figure}[h]
+%    \centering
+%    \scalebox{1.15}{
+%    \begin{circuitikz}[european, every label/.append style={align=center}]
+%        \begin{scope}[]
+%            % if applicable
+%        \end{scope}
+%    \end{circuitikz}
+%    }
+
+%    \caption{Simplified Block Diagram}
+%\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    \includegraphics[height=2in]{photo8451.jpg}
+    \caption{Thermostat}
+    \includegraphics[height=2in]{photo8453.jpg}
+    \caption{Thermostat EEM}
+    \includegraphics[angle=90, height=0.6in]{fp8453.pdf}
+    \caption{Thermostat EEM front panel}%
+    \label{fig:example}%
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\sourcesectiond{8451 Thermostat}{8453 Thermostat EEM}{https://github.com/sinara-hw/Thermostat}{https://github.com/sinara-hw/Thermostat_EEM}
+
+\section{Specifications}
+
+\ordersection{8451 Thermostat or 8453 Thermostat EEM}
+
+\finalfootnote
+
+\end{document}

8452-8462.tex

@@ -0,0 +1,66 @@
+\input{preamble.tex}
+\graphicspath{{images/8452-8462}, {images}}
+
+\title{8452 DSP Stabilizer / 8462 DSP Fast Servo}
+\author{M-Labs Limited}
+\date{January 2025}
+\revision{Revision 0}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+\maketitle
+
+\section{Features}
+
+    \begin{itemize}
+        \item{features}
+    \end{itemize}
+
+\section{Applications}
+
+    \begin{itemize}
+        \item{applications}
+    \end{itemize}
+
+\section{General Description}
+
+% Switch to next column
+\vfill\break
+
+%\begin{figure}[h]
+%    \centering
+%    \scalebox{1.15}{
+%    \begin{circuitikz}[european, every label/.append style={align=center}]
+%        \begin{scope}[]
+%            % if applicable
+%        \end{scope}
+%    \end{circuitikz}
+%    }
+
+%    \caption{Simplified Block Diagram}
+%\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    \includegraphics[height=2in]{photo8452.jpg}
+    \caption{Stabilizer card, top view}
+    \includegraphics[height=2in]{photo8462.jpg}
+    \caption{Fast Servo card, side view}
+    \includegraphics[height=3in, angle=90]{fp8452.pdf} 
+    \includegraphics[height=3in, angle=90]{fp8462.pdf} 
+    \caption{Stabilizer and Fast Servo front panels}
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\sourcesectiond{8452 DSP Stabilizer}{8462 DSP Fast Servo}{https://github.com/sinara-hw/Stabilizer}{https://github.com/sinara-hw/Fast_Servo}
+
+\section{Specifications}
+
+\ordersection{8452 DSP Stabilizer or 8462 DSP Fast Servo}
+
+\finalfootnote
+
+\end{document}

template.tex

@@ -1,4 +1,4 @@
-\include{preamble.tex}
+\input{preamble.tex}
 \graphicspath{{images}}
 
 \title{BOARD NAME}
@@ -12,15 +12,15 @@
 
 \section{Features}
 
-\begin{itemize}
+    \begin{itemize}
-\item{features}
+        \item{features}
-\end{itemize}
+    \end{itemize}
 
 \section{Applications}
 
-\begin{itemize}
+    \begin{itemize}
-\item{applications}
+        \item{applications}
-\end{itemize}
+    \end{itemize}
 
 \section{General Description}
 
@@ -52,12 +52,8 @@
 
 \section{Specifications}
 
-\newpage
 
-\section{Example ARTIQ code}
-\section*{}
-\vspace*{\fill}
 
-\input{footnote.tex}
+\finalfootnote
 
 \end{document}