4410-4412: remove phase param from single-tone e.g.

This commit is contained in:
occheung 2021-12-06 11:53:45 +08:00
parent 74bc8ef797
commit 894823d2d4
1 changed files with 2 additions and 2 deletions

View File

@ -407,7 +407,7 @@ The full documentation for the ARTIQ software and gateware is available at \url{
% Timing accuracy in the examples below is well under 1 nanosecond thanks to the ARTIQ RTIO system.
\subsection{10 MHz Sinusoidal Wave}
Generate a 10MHz sinusoid from RF0 with full scale amplitude and 0.25 turns phase, attenuated by 6 dB.
Generate a 10MHz sinusoid from RF0 with full scale amplitude, attenuated by 6 dB.
Both the CPLD and the DDS channels should be initialized.
\begin{minted}{python}
@ -418,7 +418,7 @@ def run(self):
self.dds0.init()
self.dds0.cfg_sw(True)
self.dds0.set_att(6.)
self.dds0.set(10*MHz, amplitude=1.0, phase=0.25)
self.dds0.set(10*MHz, amplitude=1.0)
\end{minted}
If the synchronization feature of AD9910 was enabled, RF signal across different channels of the same Urukul can be synchronized.