architeuthis/assembly
1
0
Fork 0
forked from sinara-hw/assembly
Code Pull Requests Activity

Add operating warnings and zotino failure

Browse Source 
Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
Egor Savkin 2023-05-10 17:17:14 +08:00
parent 2667ce11bb
commit f048f1e5b4
2 changed files with 20 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
src/build_test_firmware.md
View File

@ -1,5 +1,16 @@
# Build and test firmware
## Operating hints and warnings
* 😡 **Always** use grounding strap during dis/assembly or other cards' physical operation
* 😡 **Always** power off devices before un/plugging
* 🧐 If needed to power-cycle the crate, wait at least 30 seconds before turning them on
* 🙅 Avoid the boards touching conductive materials - wires, metals. Use at
least plastic ESD bags if you need the cards to be put at the desk or any other surface.
* 💁 Be gentle to the EEM ports and any other connectors. Support them when plugging, hold when unplugging
* 🙆 If you need to take the cards out, take them out one-by-one from the end, unplug EEM and cables if you feel high tension
* 🙆 Use dedicated power supplies for each crate
## Kasli standalone
### Checklist
@ -63,7 +74,7 @@ you can use this book's pages, or if there is no instruction for testing your ha
### Known issues
* [artiq-zynq#197](https://git.m-labs.hk/M-Labs/artiq-zynq/issues/197) - some cards (Sampler, Mirny, Zotino and others)
do not work properly with some EEM ports. You might need to reconnect the card to the other ports until it gets working.
do not work properly with some EEM ports. You might need to connect the card to the other ports until it gets working.
## Master-satellite setups

8
src/hw/zotino_fastino.md
View File

@ -48,3 +48,11 @@ Press ENTER when done.
2. Check that respective pins have voltages as described by `artiq_sinara_test`
3. If there are [BNC/SMA-IDC adapters](./bnc_sma_idc_adapter.md), also check their voltages - they should be the same
4. Check LEDs are on
## Common problems
### High-freq audible noise and output values all near -0.1 on Zotino v1.4.2
This may happen when power-cycle is too short. Power down the crate, wait at least 30 seconds, and power up again.
[Issue](https://github.com/sinara-hw/Zotino/issues/37).