architeuthis/assembly
1
0
Fork 0
forked from sinara-hw/assembly
Code Pull Requests Activity

Update booster instructions for new firmware version

Browse Source 
Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
Egor Savkin 2023-11-13 11:18:44 +08:00
parent eb372f4121
commit a9645c3b03
1 changed files with 45 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

47
src/hw/booster.md
View File

@ -8,9 +8,40 @@
### Flashing
#### Easier way
```shell
# download binary from https://files.m-labs.hk/s/DcJwdC33tyBK7at
nix-shell -p dfu-util
dfu-util -a 0 -s 0x08000000:leave --download booster0.5.0.bin
```
#### Build from source on Fedora 38
Creating proper Nix shell for updated Rust is quite troublesome, so the faster way is actually to use any
classic Linux distribution:
```shell
git clone https://github.com/quartiq/booster.git # download sources
sudo dnf install clang dfu-util
cd booster/
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh # install Rust, we need rustup
rustup target add thumbv7em-none-eabihf
cargo install cargo-binutils
rustup component add llvm-tools-preview
cargo build --release
cargo objcopy --release -- -O binary booster.bin
# enter dfu mode by either serial terminal or
# press `DFU Bootloader` button while rebooting
dfu-util -a 0 -s 0x08000000:leave --download booster.bin
```
#### For version before September 2023 on NixOS
```shell
git clone git@github.com:quartiq/booster.git
cd booster
git checkout f7d89f4d9d7760e8bc73ec13f17212512b60af15 # or earlier
nix-shell -p rustup cargo rustc dfu-util
rustup target add thumbv7em-none-eabihf
cargo install cargo-binutils
@ -32,7 +63,7 @@ dfu-util -a 0 -s 0x08000000:leave --download booster.bin
```
3. `mosquitto -c mosquitto.conf -d`
4. Run `cutecom`
5. Connect to the Booster via `/dev/ttyACMX` port, baud 9600
5. Connect to the Booster via `/dev/ttyACMX` port, baud 9600, switch from LF to CR on newer version
6. Send `help` command to check if it works
7. Enter commands (change details if necessary):
```shell
@ -44,6 +75,13 @@ dfu-util -a 0 -s 0x08000000:leave --download booster.bin
# apply changes and wait until it fully rebooted
reset
```
Newer version:
```shell
write broker "192.168.1.123"
write ip "192.168.1.75"
# apply changes and wait until it fully rebooted
reset
```
8. Check the Booster connects to your broker.
9. Download AppImage from [MQTT Explorer](https://mqtt-explorer.com/)
10. Run it with `appimage-run /path/to/MQTT-Explorer-XXX.AppImage`
@ -58,7 +96,12 @@ dfu-util -a 0 -s 0x08000000:leave --download booster.bin
4. Configure oscilloscope for 1M Ohm impedance
5. Attach attenuator to the Urukul's RF2
6. `cd py/`
7. You may also need to download or install python's `gmqtt` and `miniconf`
7. You may also need to download or install python's `gmqtt` and `miniconf`:
```shell
python -m venv env
source env/bin/activate.fish
pip install git+https://github.com/quartiq/miniconf#subdirectory=py/miniconf-mqtt
```
8. Enable channels: `python -m booster --broker 192.168.1.123 --prefix dt/sinara/booster/xx-xx-xx-xx-xx-xx --channel N tune=0.1`
9. Using [booster_template](../extra/booster_template.ods) fill in `y0`, `y1`, `m`, `c`, values using instructions below
10. Update settings with the adjusted values