architeuthis
/
assembly
forked from sinara-hw/assembly
1
0
Fork 0
Code Pull Requests Activity

Add a bit more details for the fastino's no gateware issue 

Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
Egor Savkin 2024-03-26 14:47:40 +08:00
parent b948ce96de
commit 5659f5b60a
1 changed files with 11 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
src/hw/zotino_fastino.md
View File

@ -56,18 +56,19 @@ Press ENTER when done.
This may happen when power-cycle is too short. Power down the crate, wait at least 30 seconds, and power up again.
[Issue](https://github.com/sinara-hw/Zotino/issues/37).
### Zero voltage output on Fastino
### Zero/meaningless voltage output on Fastino
Some Fastino may not output any voltage during testing, usually that means it has no gateware.
Some Fastino may not output any meaningful voltage during testing, usually that means it has no gateware flashed.
Another common symptom of no gateware is that no LEDs are lit up. Whereas if the gateware has been flashed, the PG and FD LEDs will be lit green.
You can flash the gateware with a standalone Kasli/Kasli-SoC:
You can flash the gateware with a Kasli/Kasli-SoC, be it in the crate or standalone (no specific gateware needed for Kasli/SoC):
1. Download the latest `fastino.bin` release from [quartiq/fastino](https://github.com/quartiq/fastino/releases)
2. Run `git clone https://github.com/quartiq/kasli-i2c.git` and place `fastino.bin` in the kasli-i2c directory
2. Connect the Fastino's EEM0 to any available Kasli/Kasli-SoC EEM port (**do not hot-plug**)
3. Power on the standalone Kasli/Kasli-SoC
4. Run `nix-shell -p python311Packages.pyftdi`
5. Run `cd kasli-i2c; python flash_fastino.py 0 EEM<number> write fastino.bin` where `<number>` is the EEM port number on the Kasli/Kasli-SoC side
6. If PG and FD LEDs are lit green, the Fastino is ready.
1. Download the latest `fastino.bin` release from [quartiq/fastino](https://github.com/quartiq/fastino/releases).
2. Run `git clone https://github.com/quartiq/kasli-i2c.git` and place `fastino.bin` in the kasli-i2c directory.
3. Connect the Fastino's EEM0 to any available Kasli/Kasli-SoC EEM port ([**do not hot-plug**](../build_test_firmware.md#operating-hints-and-warnings)).
You may skip this step if Fastino is connected within a crate.
4. Power on the standalone Kasli/Kasli-SoC and connect it to the PC via data micro-USB.
5. Run `nix-shell -p python311Packages.pyftdi`.
6. Run `cd kasli-i2c; python flash_fastino.py 0 EEM<number> write fastino.bin` where `<number>` is the EEM port number on the Kasli/Kasli-SoC side.
7. If PG and FD LEDs are lit green, the Fastino is ready.