# Strongly inspired by the migen build of humpback
# Using STM32 Nucleo-H743ZI2 board
# Note to self: Pin assignment differs from Nucleo-H743ZI

import os
import subprocess

from nmigen.build import *
from nmigen.vendor.lattice_ice40 import *
from nmigen_boards.resources import *
from resources import *


__all__ = ["HumpbackPlatform"]


class HumpbackPlatform(LatticeICE40Platform):
	device = "iCE40HX8K"		# Using ICE40HX8K-CT256
	package = "CT256"
	default_clk = "clk25"

	resources = [

		# Define clock
		Resource("clk25", 0, Pins("K9", dir="i"),
			Clock(25e6), Attrs(GLOBAL=True, IO_STANDARD="SB_LVCMOS")
		),

		# Define user LED
		Resource("user_led", 0, Pins("H3", dir="o"),
			Attrs(IO_STANDARD="SB_LVCMOS")
		),

		# Define UART interfaces
		UARTResource(0,
			rx="T11", tx="M13", rts="M15", cts="T10",
			attrs=Attrs(IO_STANDARD="SB_LVCMOS", PULLUP=1)
		),

		# UART1 interface: Read note for UART interface above
		# UART1 interface is broken due to pin rearrangement introduced for Nucleo-H743ZI2
		# Uncomment if fixed, or found an alternative (e.g. bit banging UART)
#		*UARTResource(1,
#			tx="M11", rx="T13", rts="A6", cts="B16",
#			attrs=Attrs(IO_STANDARD="SB_LVCMOS", PULLUP=1)
#		),

		# Define SPI interfaces
		# Note: Use "role=device" to make humpback a SPI slave
		#	The ~CS pin is a global pin, but not being configured global.
		SPIResource(0,
			cs="R2", clk="C8", mosi="N5", miso="T2",
			attrs=Attrs(IO_STANDARD="SB_LVCMOS")
		),

		# Define I2C interface
		#	Use "role=device" to make humpback a I2C slave
		I2CResource(0,
			sda="T16", scl="M12",
			attrs=Attrs(IO_STANDARD="SB_LVCMOS", PULLUP=1)
		),
	]

	# Using the dict approach in (o)migen
	# Note: Numbering is required in nMigen, so some probably not very meaningful strings/integers are inserted
	connectors = [

		# EEM0 Connector
		Connector("eem", 0, {
			"d0_cc_n": "H1",
			"d0_cc_p": "J3",
            "d1_n"	: "B1",
            "d1_p"	: "F5",
            "d2_n"	: "C2",
            "d2_p"	: "C1",
            "d3_n"	: "D2",
            "d3_p"	: "F4",
            "d4_n"	: "D1",
            "d4_p"	: "G5",
            "d5_n"	: "E3",
            "d5_p"	: "G4",
            "d6_n"	: "E2",
            "d6_p"	: "H5",
            "d7_n"	: "F3",
            "d7_p"	: "G3",
		}),

		# EEM1 Connector
		Connector("eem", 1, {
			"d0_cc_n": "L3",
			"d0_cc_p": "L6",
			"d1_n": "F1",
			"d1_p": "H6",
			"d2_n": "G2",
			"d2_p": "H4",
			"d3_n": "H2",
			"d3_p": "J4",
			"d4_n": "J1",
			"d4_p": "J2",
			"d5_n": "K3",
			"d5_p": "K1",
			"d6_n": "L1",
			"d6_p": "L4",
			"d7_n": "M1",
			"d7_p": "K4",
		}),

		# EEM2 Connector
		Connector("eem", 2, {
	        "d0_cc_n": "G1",
			"d0_cc_p": "J5",
			"d1_n": "M2",
			"d1_p": "K5",
			"d2_n": "N2",
			"d2_p": "L7",
			"d3_n": "M3",
			"d3_p": "M6",
			"d4_n": "N3",
			"d4_p": "L5",
			"d5_n": "M4",
			"d5_p": "P1",
			"d6_n": "M5",
			"d6_p": "P2",
			"d7_n": "N4",
			"d7_p": "R1",
		}),

		# STM32 Nucleo/ Arduino Connector
		Connector("stm32", "pins", {
	        "PA0": "A2",
            "PA1": "P14",
            "PA2": "B8",
	        "PA3": "L13",
		    "PA7": "N12",
		    "PA8": "M9",
		    "PA9": "P10",
		    "PA10": "R10",
		    "PA15": "B14",

		    "PB0": "A1",
		    "PB1": "G12",
		    "PB2": "B6",
		    "PB6": "A7",
		    "PB10": "C3",
		    "PB11": "F7",
		    "PB12": "B13",
		    "PB13": "B12",
		    "PB15": "A11",

			"PC0": "L14",
			"PC1": "M14",
			"PC2": "A9",
			"PC3": "M16",
			"PC4": "N16",
			"PC5": "P16",
			"PC6": "B10",
			"PC7": "B15",
			"PC8": "H16",
			"PC9": "J10",
			"PC10": "J16",
			"PC11": "J15",
			"PC12": "K12",

			"PD0": "T9",
			"PD1": "N9",
			"PD2": "K13",
			"PD7": "L12",
			"PD11": "E5",
			"PD12": "D5",
			"PD13": "C5",

	        "PF7": "L9",
			"PF8": "L10",
			"PF9": "P9",
			"PF14": "B9",

			"PG0": "M7",
			"PG1": "P8",
			"PG2": "K14",
			"PG3": "K15",
		}),

		# Beaglebone Black Connector
		Connector("bb", "pins", {
			"CLKOUT": "R9",

			"GPIO0_7": "R14",

			"GPIO1_16": "A16",
			"GPIO1_17": "R3",
			"GPIO1_29": "D11",
			"GPIO1_31": "D14",

			"GPIO2_6": "D16",
			"GPIO2_7": "C16",
			"GPIO2_8": "E16",
			"GPIO2_9": "D15",
			"GPIO2_11": "F15",
			"GPIO2_13": "F16",
			"GPIO2_22": "C11",
			"GPIO2_23": "C10",
			"GPIO2_24": "E10",
			"GPIO2_25": "D4",

			"GPIO3_19": "P4",
			"GPIO3_21":	"R4",

	        "GPMC_A2": "T7",
			"GPMC_A3": "T1",
            "GPMC_A14": "F9",
            "GPMC_A15": "B7",
            "GPMC_AD0": "C12",
            "GPMC_AD1": "E11",
            "GPMC_AD2": "J12",
            "GPMC_AD3": "J11",
            "GPMC_AD4": "C13",
            "GPMC_AD5": "C14",
            "GPMC_AD6": "J14",
            "GPMC_AD7": "J13",
            "GPMC_AD8": "E13",
            "GPMC_AD9": "G13",
            "GPMC_AD10": "G14",
            "GPMC_AD11": "G10",
            "GPMC_AD12": "E14",
            "GPMC_AD13": "H14",
            "GPMC_AD14": "F14",
            "GPMC_AD15": "F13",
            "GPMC_ADVN": "H12",
            "GPMC_BE0N": "G16",
            "GPMC_CLK": "H11",
            "GPMC_CSN1": "D13",
            "GPMC_OEN": "H13",
            "GPMC_WE1N": "G15",
		}),

		# ESP32 Connector
		Connector("esp32", "pins", {
		    "IO2": "D9",
		    "IO4": "D7",
		    "IO22": "C7",
		    "IO34": "E9",
		    "IO35": "C9",
		}),

		# OrangePI Zero Connector
		Connector("orange_pi", "pins", {
			"PG06": "A15",
		}),
	]

	# tool chain setup, using default ICE40 HX8K evaluation code
	def toolchain_program(self, products, name):
		iceprog = os.environ.get("ICEPROG", "iceprog")
		with products.extract("{}.bin".format(name)) as bitstream_filename:
			subprocess.check_call([iceprog, "-S", bitstream_filename])

if __name__ == "__main__":
   	from nmigen_boards.test.blinky import *
   	HumpbackPlatform().build(Blinky(), do_program=False)