From 9d49afa5a822548b975f00d8b51ba9256b59fb62 Mon Sep 17 00:00:00 2001
From: occheung <dc@m-labs.hk>
Date: Tue, 29 Sep 2020 17:05:11 +0800
Subject: [PATCH] readme: tiny format change

---
 README.md | 35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/README.md b/README.md
index 98a257d..3923101 100644
--- a/README.md
+++ b/README.md
@@ -85,23 +85,26 @@ publish-mqtt Foo/Bar "baz"
 ## List of Commands
 All currently supported commands are listed below.  
 **Note: The following table only lists the subtopic. To make a full topic, add `Urukul/Control/` in front of all subtopics.**  
-Example: Full topic of Reset command: `Urukul/Control/Reset`
+### Example: Full topic of Reset command
+```shell
+Urukul/Control/Reset
+```
 
-| Subtopic| Message| Functionality|
-| ---| ---| ---|
-| `Reset`| | Reset the device|
-| `ChannelX/Switch`| `<off/on>`| Turn off/on the RF switch at channel X.|
-| `ChannelX/Attenuation`| `<atten> [dB]`| Set attenuation of channel X.|
-| `Clock/Source`| `<clk_src>`| Select the clock source of Urukul.|
-| `Clock/Frequency`| `<f_clk> [unit]`| Set the clock frequency of the clock source of Urukul.|
-| `Clock/Source`| `<clk_div>`| Set the clock division of Urukul.|
-| `Clock`| `frequency: <f_clk> [unit], source: <clk_src>, division: <clk_div>`| Setup the clock tree for Urukul.|
-| `ChannelX/SystemClock`| `<f_sys_clk> [unit]`| Set the system clock frequency of channel X.|
-| `ChannelX/ProfileY/Singletone/Frequency`| `<freq> [unit]`| Setup a single tone profile at channel X, profile Y, with frequency `<freq> [unit]`.|
-| `ChannelX/ProfileY/Singletone/Amplitude`| `<ampl>`| Setup a single tone profile at channel X, profile Y, with amplitude factor `<ampl>`.|
-| `ChannelX/ProfileY/Singletone/Phase`| `<phase> [deg]`| Setup a single tone profile at channel X, profile Y, with phase `<phase> [deg]`.|
-| `ChannelX/ProfileY/Singletone`| `frequency: <freq> [unit], amplitude: <ampl>, phase: <phase>`| Setup a compelte single tone profile at channel X, profile Y.|
-| `Profile`| `<pr_num>`| Switch to a DDS profile across all channels.|
+| Subtopic                                | Message                                                            | Functionality|
+| --------------------------------------- | ------------------------------------------------------------------ | ---|
+| `Reset`                                 |                                                                    | Reset the device|
+| `ChannelX/Switch`                       | `<off/on>`                                                         | Turn off/on the RF switch at channel X.|
+| `ChannelX/Attenuation`                  | `<atten> [dB]`                                                     | Set attenuation of channel X.|
+| `Clock/Source`                          | `<clk_src>`                                                        | Select the clock source of Urukul.|
+| `Clock/Frequency`                       | `<f_clk> [unit]`                                                   | Set the clock frequency of the clock source of Urukul.|
+| `Clock/Source`                          | `<clk_div>`                                                        | Set the clock division of Urukul.|
+| `Clock`                                 | `frequency: <f_clk> [unit], source: <clk_src>, division: <clk_div>`| Setup the clock tree for Urukul.|
+| `ChannelX/SystemClock`                  | `<f_sys_clk> [unit]`                                               | Set the system clock frequency of channel X.|
+| `ChannelX/ProfileY/Singletone/Frequency`| `<freq> [unit]`                                                    | Setup a single tone profile at channel X, profile Y, with frequency `<freq> [unit]`.|
+| `ChannelX/ProfileY/Singletone/Amplitude`| `<ampl>`                                                           | Setup a single tone profile at channel X, profile Y, with amplitude factor `<ampl>`.|
+| `ChannelX/ProfileY/Singletone/Phase`    | `<phase> [deg]`                                                    | Setup a single tone profile at channel X, profile Y, with phase `<phase> [deg]`.|
+| `ChannelX/ProfileY/Singletone`          | `frequency: <freq> [unit], amplitude: <ampl>, phase: <phase>`      | Setup a compelte single tone profile at channel X, profile Y.|
+| `Profile`                               | `<pr_num>`                                                         | Switch to a DDS profile across all channels.|
 
 ## Reset the device
 - Topic: `Urukul/Control/Reset`