# The contents of this file are partially dependend on
# the adapter that you have. Please modify accordingly.
adapter driver ftdi
ftdi vid_pid 0x0403 0x6010
ftdi channel 0
# Every pin set as high impedance except TCK, TDI, TDO and TMS
ftdi layout_init 0x0088 0x008b

# nSRST defined on pin CN2-13 of the MiniModule (pin ADBUS5 [AD5] on the FT2232H chip)
# This choice is arbitrary. Use other GPIO pin if desired.
ftdi layout_signal nSRST -data 0x0020 -oe 0x0020

transport select jtag
adapter speed 10000

set PL_TAPID 0x13722093
set SMP 1

source ./zynq-7000.cfg

reset_config srst_only srst_open_drain
adapter srst pulse_width 250
adapter srst delay 400

source ./common.cfg

reset halt

# Disable MMU
targets $_TARGETNAME_1
arm mcr 15 0 1 0 0 [expr { [arm mrc 15 0 1 0 0] & ~0xd }]
targets $_TARGETNAME_0
arm mcr 15 0 1 0 0 [expr { [arm mrc 15 0 1 0 0] & ~0xd }]