forked from M-Labs/nac3
Copy io expander from kasli
Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
parent
df4988c774
commit
4bc936f071
|
@ -0,0 +1,165 @@
|
|||
use crate::pl::csr;
|
||||
use crate::i2c;
|
||||
|
||||
// Only the bare minimum registers. Bits/IO connections equivalent between IC types.
|
||||
struct Registers {
|
||||
// PCA9539 equivalent register names in comments
|
||||
iodira: u8, // Configuration Port 0
|
||||
iodirb: u8, // Configuration Port 1
|
||||
gpioa: u8, // Output Port 0
|
||||
gpiob: u8, // Output Port 1
|
||||
}
|
||||
|
||||
pub struct IoExpander {
|
||||
busno: u8,
|
||||
port: u8,
|
||||
address: u8,
|
||||
virtual_led_mapping: &'static [(u8, u8, u8)],
|
||||
iodir: [u8; 2],
|
||||
out_current: [u8; 2],
|
||||
out_target: [u8; 2],
|
||||
registers: Registers,
|
||||
}
|
||||
|
||||
impl IoExpander {
|
||||
#[cfg(all(soc_platform = "kasli", hw_rev = "v2.0"))]
|
||||
pub fn new(index: u8) -> Result<Self, &'static str> {
|
||||
const VIRTUAL_LED_MAPPING0: [(u8, u8, u8); 2] = [(0, 0, 6), (1, 1, 6)];
|
||||
const VIRTUAL_LED_MAPPING1: [(u8, u8, u8); 2] = [(2, 0, 6), (3, 1, 6)];
|
||||
|
||||
// Both expanders on SHARED I2C bus
|
||||
let mut io_expander = match index {
|
||||
0 => IoExpander {
|
||||
busno: 0,
|
||||
port: 11,
|
||||
address: 0x40,
|
||||
virtual_led_mapping: &VIRTUAL_LED_MAPPING0,
|
||||
iodir: [0xff; 2],
|
||||
out_current: [0; 2],
|
||||
out_target: [0; 2],
|
||||
registers: Registers {
|
||||
iodira: 0x00,
|
||||
iodirb: 0x01,
|
||||
gpioa: 0x12,
|
||||
gpiob: 0x13,
|
||||
},
|
||||
},
|
||||
1 => IoExpander {
|
||||
busno: 0,
|
||||
port: 11,
|
||||
address: 0x42,
|
||||
virtual_led_mapping: &VIRTUAL_LED_MAPPING1,
|
||||
iodir: [0xff; 2],
|
||||
out_current: [0; 2],
|
||||
out_target: [0; 2],
|
||||
registers: Registers {
|
||||
iodira: 0x00,
|
||||
iodirb: 0x01,
|
||||
gpioa: 0x12,
|
||||
gpiob: 0x13,
|
||||
},
|
||||
},
|
||||
_ => return Err("incorrect I/O expander index"),
|
||||
};
|
||||
if !io_expander.check_ack()? {
|
||||
#[cfg(feature = "log")]
|
||||
log::info!(
|
||||
"MCP23017 io expander {} not found. Checking for PCA9539.",
|
||||
index
|
||||
);
|
||||
io_expander.address += 0xa8; // translate to PCA9539 addresses (see schematic)
|
||||
io_expander.registers = Registers {
|
||||
iodira: 0x06,
|
||||
iodirb: 0x07,
|
||||
gpioa: 0x02,
|
||||
gpiob: 0x03,
|
||||
};
|
||||
if !io_expander.check_ack()? {
|
||||
return Err("Neither MCP23017 nor PCA9539 io expander found.");
|
||||
};
|
||||
}
|
||||
Ok(io_expander)
|
||||
}
|
||||
|
||||
#[cfg(soc_platform = "kasli")]
|
||||
fn select(&self) -> Result<(), &'static str> {
|
||||
let mask: u16 = 1 << self.port;
|
||||
i2c::switch_select(self.busno, 0x70, mask as u8)?;
|
||||
i2c::switch_select(self.busno, 0x71, (mask >> 8) as u8)?;
|
||||
Ok(())
|
||||
}
|
||||
|
||||
fn write(&self, addr: u8, value: u8) -> Result<(), &'static str> {
|
||||
i2c::start(self.busno)?;
|
||||
i2c::write(self.busno, self.address)?;
|
||||
i2c::write(self.busno, addr)?;
|
||||
i2c::write(self.busno, value)?;
|
||||
i2c::stop(self.busno)?;
|
||||
Ok(())
|
||||
}
|
||||
|
||||
fn check_ack(&self) -> Result<bool, &'static str> {
|
||||
// Check for ack from io expander
|
||||
self.select()?;
|
||||
i2c::start(self.busno)?;
|
||||
let ack = i2c::write(self.busno, self.address)?;
|
||||
i2c::stop(self.busno)?;
|
||||
Ok(ack)
|
||||
}
|
||||
|
||||
fn update_iodir(&self) -> Result<(), &'static str> {
|
||||
self.write(self.registers.iodira, self.iodir[0])?;
|
||||
self.write(self.registers.iodirb, self.iodir[1])?;
|
||||
Ok(())
|
||||
}
|
||||
|
||||
pub fn init(&mut self) -> Result<(), &'static str> {
|
||||
self.select()?;
|
||||
|
||||
for (_led, port, bit) in self.virtual_led_mapping.iter() {
|
||||
self.iodir[*port as usize] &= !(1 << *bit);
|
||||
}
|
||||
self.update_iodir()?;
|
||||
|
||||
self.out_current[0] = 0x00;
|
||||
self.write(self.registers.gpioa, 0x00)?;
|
||||
self.out_current[1] = 0x00;
|
||||
self.write(self.registers.gpiob, 0x00)?;
|
||||
Ok(())
|
||||
}
|
||||
|
||||
pub fn set_oe(&mut self, port: u8, outputs: u8) -> Result<(), &'static str> {
|
||||
self.iodir[port as usize] &= !outputs;
|
||||
self.update_iodir()?;
|
||||
Ok(())
|
||||
}
|
||||
|
||||
pub fn set(&mut self, port: u8, bit: u8, high: bool) {
|
||||
if high {
|
||||
self.out_target[port as usize] |= 1 << bit;
|
||||
} else {
|
||||
self.out_target[port as usize] &= !(1 << bit);
|
||||
}
|
||||
}
|
||||
|
||||
pub fn service(&mut self) -> Result<(), &'static str> {
|
||||
for (led, port, bit) in self.virtual_led_mapping.iter() {
|
||||
let level = unsafe { (csr::virtual_leds::status_read() >> led) & 1 };
|
||||
self.set(*port, *bit, level != 0);
|
||||
}
|
||||
|
||||
if self.out_target != self.out_current {
|
||||
self.select()?;
|
||||
if self.out_target[0] != self.out_current[0] {
|
||||
self.write(self.registers.gpioa, self.out_target[0])?;
|
||||
self.out_current[0] = self.out_target[0];
|
||||
}
|
||||
if self.out_target[1] != self.out_current[1] {
|
||||
self.write(self.registers.gpiob, self.out_target[1])?;
|
||||
self.out_current[1] = self.out_target[1];
|
||||
}
|
||||
}
|
||||
|
||||
Ok(())
|
||||
}
|
||||
}
|
|
@ -46,6 +46,7 @@ mod mgmt;
|
|||
mod analyzer;
|
||||
mod irq;
|
||||
mod i2c;
|
||||
mod io_expander;
|
||||
|
||||
static mut SEEN_ASYNC_ERRORS: u8 = 0;
|
||||
|
||||
|
|
Loading…
Reference in New Issue