abdul124
/
nac3
forked from M-Labs/nac3
1
0
Fork 0
Code Pull Requests Activity

Firmware: Runtime WRPLL 

runtime: drive CLK_SEL to true when si549 is used
runtime & libboard_artiq: allow standalone to use io_expander
si549: add bit bang mmcm dynamic configuration
si549: add frequency counter for refclk
rtio_clocking & si549: add 125Mhz wrpll refclk setup
This commit is contained in:
morgan 2024-03-11 14:46:38 +08:00
parent b81323af30
commit 14fa038118
4 changed files with 318 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
src/libboard_artiq/src/lib.rs
View File

@ -22,7 +22,7 @@ pub mod drtioaux;
pub mod drtioaux_async;
pub mod drtioaux_proto;
pub mod fiq;
#[cfg(all(feature = "target_kasli_soc", has_drtio))]
#[cfg(feature = "target_kasli_soc")]
pub mod io_expander;
pub mod logger;
#[cfg(has_drtio)]

141
src/libboard_artiq/src/si549.rs
View File

@ -673,3 +673,144 @@ pub mod wrpll {
}
}
}
#[cfg(has_wrpll_refclk)]
pub mod wrpll_refclk {
use super::*;
pub struct MmcmSetting {
pub clkout0_reg1: u16, //0x08
pub clkout0_reg2: u16, //0x09
pub clkfbout_reg1: u16, //0x14
pub clkfbout_reg2: u16, //0x15
pub div_reg: u16, //0x16
pub lock_reg1: u16, //0x18
pub lock_reg2: u16, //0x19
pub lock_reg3: u16, //0x1A
pub power_reg: u16, //0x28
pub filt_reg1: u16, //0x4E
pub filt_reg2: u16, //0x4F
}
fn one_clock_cycle() {
unsafe {
csr::wrpll_refclk::mmcm_dclk_write(1);
csr::wrpll_refclk::mmcm_dclk_write(0);
}
}
fn set_addr(address: u8) {
unsafe {
csr::wrpll_refclk::mmcm_daddr_write(address);
}
}
fn set_data(value: u16) {
unsafe {
csr::wrpll_refclk::mmcm_din_write(value);
}
}
fn set_enable(en: bool) {
unsafe {
let val = if en { 1 } else { 0 };
csr::wrpll_refclk::mmcm_den_write(val);
}
}
fn set_write_enable(en: bool) {
unsafe {
let val = if en { 1 } else { 0 };
csr::wrpll_refclk::mmcm_dwen_write(val);
}
}
fn get_data() -> u16 {
unsafe { csr::wrpll_refclk::mmcm_dout_read() }
}
fn drp_ready() -> bool {
unsafe { csr::wrpll_refclk::mmcm_dready_read() == 1 }
}
#[allow(dead_code)]
fn read(address: u8) -> u16 {
set_addr(address);
set_enable(true);
// Set DADDR on the mmcm and assert DEN for one clock cycle
one_clock_cycle();
set_enable(false);
while !drp_ready() {
// keep the clock signal until data is ready
one_clock_cycle();
}
get_data()
}
fn write(address: u8, value: u16) {
set_addr(address);
set_data(value);
set_write_enable(true);
set_enable(true);
// Set DADDR, DI on the mmcm and assert DWE, DEN for one clock cycle
one_clock_cycle();
set_write_enable(false);
set_enable(false);
while !drp_ready() {
// keep the clock signal until write is finished
one_clock_cycle();
}
}
fn reset(rst: bool) {
unsafe {
let val = if rst { 1 } else { 0 };
csr::wrpll_refclk::mmcm_reset_write(val)
}
}
pub fn setup(timer: &mut GlobalTimer, settings: MmcmSetting, mmcm_bypass: bool) -> Result<(), &'static str> {
unsafe {
csr::wrpll_refclk::refclk_reset_write(1);
}
if mmcm_bypass {
info!("Bypassing mmcm");
unsafe {
csr::wrpll_refclk::mmcm_bypass_write(1);
}
} else {
// Based on "DRP State Machine" from XAPP888
// hold reset HIGH during mmcm config
reset(true);
write(0x08, settings.clkout0_reg1);
write(0x09, settings.clkout0_reg2);
write(0x14, settings.clkfbout_reg1);
write(0x15, settings.clkfbout_reg2);
write(0x16, settings.div_reg);
write(0x18, settings.lock_reg1);
write(0x19, settings.lock_reg2);
write(0x1A, settings.lock_reg3);
write(0x28, settings.power_reg);
write(0x4E, settings.filt_reg1);
write(0x4F, settings.filt_reg2);
reset(false);
// wait for the mmcm to lock
timer.delay_us(100);
let locked = unsafe { csr::wrpll_refclk::mmcm_locked_read() == 1 };
if !locked {
return Err("mmcm failed to generate 125MHz ref clock from SMA CLKIN");
}
}
unsafe {
csr::wrpll_refclk::refclk_reset_write(0);
}
Ok(())
}
}

14
src/runtime/src/main.rs
View File

@ -8,14 +8,14 @@
#[macro_use]
extern crate alloc;
#[cfg(all(feature = "target_kasli_soc", has_drtio))]
#[cfg(all(feature = "target_kasli_soc", has_virtual_leds))]
use core::cell::RefCell;
use ksupport;
use libasync::task;
#[cfg(has_drtio_eem)]
use libboard_artiq::drtio_eem;
#[cfg(all(feature = "target_kasli_soc", has_drtio))]
#[cfg(feature = "target_kasli_soc")]
use libboard_artiq::io_expander;
use libboard_artiq::{identifier_read, logger, pl};
use libboard_zynq::{gic, mpcore, timer::GlobalTimer};
@ -43,7 +43,7 @@ extern "C" {
static __exceptions_start: u32;
}
#[cfg(all(feature = "target_kasli_soc", has_drtio))]
#[cfg(all(feature = "target_kasli_soc", has_virtual_leds))]
async fn io_expanders_service(
i2c_bus: RefCell<&mut libboard_zynq::i2c::I2c>,
io_expander0: RefCell<io_expander::IoExpander>,
@ -101,7 +101,7 @@ pub fn main_core0() {
info!("gateware ident: {}", identifier_read(&mut [0; 64]));
ksupport::i2c::init();
#[cfg(all(feature = "target_kasli_soc", has_drtio))]
#[cfg(feature = "target_kasli_soc")]
{
let i2c_bus = unsafe { (ksupport::i2c::I2C_BUS).as_mut().unwrap() };
let mut io_expander0 = io_expander::IoExpander::new(i2c_bus, 0).unwrap();
@ -112,6 +112,11 @@ pub fn main_core0() {
io_expander1
.init(i2c_bus)
.expect("I2C I/O expander #1 initialization failed");
// Drive CLK_SEL to true
#[cfg(has_si549)]
io_expander0.set(1, 7, true);
// Drive TX_DISABLE to false on SFP0..3
io_expander0.set(0, 1, false);
io_expander1.set(0, 1, false);
@ -119,6 +124,7 @@ pub fn main_core0() {
io_expander1.set(1, 1, false);
io_expander0.service(i2c_bus).unwrap();
io_expander1.service(i2c_bus).unwrap();
#[cfg(has_virtual_leds)]
task::spawn(io_expanders_service(
RefCell::new(i2c_bus),
RefCell::new(io_expander0),

166
src/runtime/src/rtio_clocking.rs
View File

@ -4,6 +4,8 @@ use ksupport::i2c;
use libboard_artiq::pl;
#[cfg(has_si5324)]
use libboard_artiq::si5324;
#[cfg(has_si549)]
use libboard_artiq::si549;
#[cfg(has_si5324)]
use libboard_zynq::i2c::I2c;
use libboard_zynq::timer::GlobalTimer;
@ -260,6 +262,150 @@ fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
si5324::setup(i2c, &si5324_settings, si5324_ref_input, timer).expect("cannot initialize Si5324");
}
#[cfg(all(has_si549, has_wrpll))]
fn wrpll_setup(timer: &mut GlobalTimer, clk: RtioClock, si549_settings: &si549::FrequencySetting) {
// register values are directly copied from preconfigured mmcm
let (mmcm_setting, mmcm_bypass) = match clk {
RtioClock::Ext0_Synth0_10to125 => (
si549::wrpll_refclk::MmcmSetting {
// CLKFBOUT_MULT = 62.5, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 5
clkout0_reg1: 0x1083,
clkout0_reg2: 0x0080,
clkfbout_reg1: 0x179e,
clkfbout_reg2: 0x4c00,
div_reg: 0x1041,
lock_reg1: 0x00fa,
lock_reg2: 0x7c01,
lock_reg3: 0xffe9,
power_reg: 0x9900,
filt_reg1: 0x0808,
filt_reg2: 0x0800,
},
false,
),
RtioClock::Ext0_Synth0_80to125 => (
si549::wrpll_refclk::MmcmSetting {
// CLKFBOUT_MULT = 15.625, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 10
clkout0_reg1: 0x1145,
clkout0_reg2: 0x0000,
clkfbout_reg1: 0x11c7,
clkfbout_reg2: 0x5880,
div_reg: 0x1041,
lock_reg1: 0x028a,
lock_reg2: 0x7c01,
lock_reg3: 0xffe9,
power_reg: 0x9900,
filt_reg1: 0x0808,
filt_reg2: 0x9800,
},
false,
),
RtioClock::Ext0_Synth0_100to125 => (
si549::wrpll_refclk::MmcmSetting {
// CLKFBOUT_MULT = 12.5, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 10
clkout0_reg1: 0x1145,
clkout0_reg2: 0x0000,
clkfbout_reg1: 0x1145,
clkfbout_reg2: 0x4c00,
div_reg: 0x1041,
lock_reg1: 0x0339,
lock_reg2: 0x7c01,
lock_reg3: 0xffe9,
power_reg: 0x9900,
filt_reg1: 0x0808,
filt_reg2: 0x9800,
},
false,
),
RtioClock::Ext0_Synth0_125to125 => (
si549::wrpll_refclk::MmcmSetting {
// CLKFBOUT_MULT = 10, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 10
clkout0_reg1: 0x1145,
clkout0_reg2: 0x0000,
clkfbout_reg1: 0x1145,
clkfbout_reg2: 0x0000,
div_reg: 0x1041,
lock_reg1: 0x03e8,
lock_reg2: 0x7001,
lock_reg3: 0xf3e9,
power_reg: 0x0100,
filt_reg1: 0x0808,
filt_reg2: 0x1100,
},
true,
),
_ => unreachable!(),
};
si549::helper_setup(timer, &si549_settings).expect("cannot initialize helper Si549");
si549::wrpll_refclk::setup(timer, mmcm_setting, mmcm_bypass).expect("cannot initialize ref clk for wrpll");
si549::wrpll::select_recovered_clock(true, timer);
}
#[cfg(has_si549)]
fn get_si549_setting(clk: RtioClock) -> si549::FrequencySetting {
match clk {
RtioClock::Ext0_Synth0_10to125 => {
info!("using 10MHz reference to make 125MHz RTIO clock with WRPLL");
}
RtioClock::Ext0_Synth0_80to125 => {
info!("using 80MHz reference to make 125MHz RTIO clock with WRPLL");
}
RtioClock::Ext0_Synth0_100to125 => {
info!("using 100MHz reference to make 125MHz RTIO clock with WRPLL");
}
RtioClock::Ext0_Synth0_125to125 => {
info!("using 125MHz reference to make 125MHz RTIO clock with WRPLL");
}
RtioClock::Int_100 => {
info!("using internal 100MHz RTIO clock");
}
RtioClock::Int_125 => {
info!("using internal 125MHz RTIO clock");
}
_ => {
warn!(
"rtio_clock setting '{:?}' is unsupported. Falling back to default internal 125MHz RTIO clock.",
clk
);
}
};
match clk {
RtioClock::Int_100 => {
si549::FrequencySetting {
main: si549::DividerConfig {
hsdiv: 0x06C,
lsdiv: 0,
fbdiv: 0x046C5F49797,
},
helper: si549::DividerConfig {
// 100MHz*32767/32768
hsdiv: 0x06C,
lsdiv: 0,
fbdiv: 0x046C5670BBD,
},
}
}
_ => {
// Everything else use 125MHz
si549::FrequencySetting {
main: si549::DividerConfig {
hsdiv: 0x058,
lsdiv: 0,
fbdiv: 0x04815791F25,
},
helper: si549::DividerConfig {
// 125MHz*32767/32768
hsdiv: 0x058,
lsdiv: 0,
fbdiv: 0x04814E8F442,
},
}
}
}
}
pub fn init(timer: &mut GlobalTimer, cfg: &Config) {
let clk = get_rtio_clock_cfg(cfg);
#[cfg(has_si5324)]
@ -274,9 +420,29 @@ pub fn init(timer: &mut GlobalTimer, cfg: &Config) {
}
}
#[cfg(has_si549)]
let si549_settings = get_si549_setting(clk);
#[cfg(has_si549)]
si549::main_setup(timer, &si549_settings).expect("cannot initialize main Si549");
#[cfg(has_drtio)]
init_drtio(timer);
#[cfg(not(has_drtio))]
init_rtio(timer);
#[cfg(all(has_si549, has_wrpll))]
{
// SYS CLK switch will reset CSRs that are used by WRPLL
match clk {
RtioClock::Ext0_Synth0_10to125
| RtioClock::Ext0_Synth0_80to125
| RtioClock::Ext0_Synth0_100to125
| RtioClock::Ext0_Synth0_125to125 => {
wrpll_setup(timer, clk, &si549_settings);
}
_ => {}
}
}
}