update Thermostat description

This commit is contained in:
Sebastien Bourdeauducq 2021-01-20 15:53:26 +08:00
parent d7297386ac
commit c1b022b5e6
1 changed files with 5 additions and 5 deletions

View File

@ -74,21 +74,21 @@ The <a href="https://github.com/quartiq/stabilizer" target="_blank" rel="noopene
##### Sinara 8451 Thermostat ##### Sinara 8451 Thermostat
The Sinara 8451 Thermostat is a 2-channel temperature controller EEM based on the Maxim MAX1968 driver, capable of driving 6W into a TEC or resistive heater. The sensor interface is based on AD7172 ADC. The Sinara 8451 Thermostat is a precision 2-channel temperature controller based on the Maxim MAX1968 driver, capable of driving 6W into a TEC or resistive heater. The sensor interface is based on 24-bit AD7172 ADC.
Preliminary specifications: Temperature stability better than 1mK can be achieved; typically the temperature drift is around 300µK peak-to-peak over 10 hours.
Specifications:
- Channel count: 2 - Channel count: 2
- Sensor: 10k NTC thermistor - Sensor: 10k NTC thermistor
- Load (heater/TEC) drive: up to 8W (+-2A with 4V compliance) - Load (heater/TEC) drive: up to 8W (+-2A with 4V compliance)
- Form factor: 3U module or stand-alone AL enclosure (Hammond 1455C1202). - Form factor: 3U module or stand-alone aluminum enclosure.
- Output connectors: Sensor and load connect via either terminal block connector on the front panel or via internal 100mil pin-header. - Output connectors: Sensor and load connect via either terminal block connector on the front panel or via internal 100mil pin-header.
- Programming interface: Ethernet accessible via RJ45 connector on the front panel - Programming interface: Ethernet accessible via RJ45 connector on the front panel
- Power supply: +12V DC (1.5A max) supplied either by a front-panel barrel connector, via 100mils Zotino connector, or PoE (up to 30W). - Power supply: +12V DC (1.5A max) supplied either by a front-panel barrel connector, via 100mils Zotino connector, or PoE (up to 30W).
- STM32 MCU - STM32 MCU
This module is still in development and is not currently available.
{% end %} {% end %}