504 lines
26 KiB
Rust
504 lines
26 KiB
Rust
#![cfg_attr(not(test), no_std)]
|
|
#![cfg_attr(not(test), no_main)]
|
|
#![feature(maybe_uninit_extra, maybe_uninit_ref)]
|
|
#![cfg_attr(test, allow(unused))]
|
|
// TODO: #![deny(warnings, unused)]
|
|
|
|
#[cfg(not(any(feature = "semihosting", test)))]
|
|
use panic_abort as _;
|
|
#[cfg(all(feature = "semihosting", not(test)))]
|
|
use panic_semihosting as _;
|
|
|
|
use log::{info, warn};
|
|
|
|
use core::fmt::Write;
|
|
use cortex_m::asm::wfi;
|
|
use cortex_m_rt::entry;
|
|
use stm32f4xx_hal::{
|
|
hal::watchdog::{WatchdogEnable, Watchdog},
|
|
rcc::RccExt,
|
|
watchdog::IndependentWatchdog,
|
|
time::{U32Ext, MegaHertz},
|
|
stm32::{CorePeripherals, Peripherals, SCB},
|
|
};
|
|
use smoltcp::{
|
|
time::Instant,
|
|
wire::EthernetAddress,
|
|
};
|
|
use uom::{
|
|
fmt::DisplayStyle::Abbreviation,
|
|
si::{
|
|
f64::{
|
|
ElectricCurrent,
|
|
ElectricPotential,
|
|
ElectricalResistance,
|
|
ThermodynamicTemperature,
|
|
},
|
|
electric_current::ampere,
|
|
electric_potential::volt,
|
|
electrical_resistance::ohm,
|
|
thermodynamic_temperature::degree_celsius,
|
|
},
|
|
};
|
|
|
|
mod init_log;
|
|
use init_log::init_log;
|
|
mod usb;
|
|
mod leds;
|
|
mod pins;
|
|
use pins::Pins;
|
|
mod ad7172;
|
|
mod ad5680;
|
|
mod net;
|
|
mod server;
|
|
use server::Server;
|
|
mod session;
|
|
use session::{Session, SessionOutput};
|
|
mod command_parser;
|
|
use command_parser::{CenterPoint, Command, ShowCommand, PwmPin};
|
|
mod timer;
|
|
mod pid;
|
|
mod steinhart_hart;
|
|
mod channels;
|
|
use channels::{CHANNELS, Channels};
|
|
mod channel;
|
|
mod channel_state;
|
|
mod config;
|
|
use config::Config;
|
|
|
|
|
|
const HSE: MegaHertz = MegaHertz(8);
|
|
#[cfg(not(feature = "semihosting"))]
|
|
const WATCHDOG_INTERVAL: u32 = 1_000;
|
|
#[cfg(feature = "semihosting")]
|
|
const WATCHDOG_INTERVAL: u32 = 30_000;
|
|
|
|
pub const EEPROM_PAGE_SIZE: usize = 8;
|
|
pub const EEPROM_SIZE: usize = 128;
|
|
|
|
const TCP_PORT: u16 = 23;
|
|
|
|
|
|
/// Initialization and main loop
|
|
#[cfg(not(test))]
|
|
#[entry]
|
|
fn main() -> ! {
|
|
init_log();
|
|
info!("tecpak");
|
|
|
|
let mut cp = CorePeripherals::take().unwrap();
|
|
cp.SCB.enable_icache();
|
|
cp.SCB.enable_dcache(&mut cp.CPUID);
|
|
|
|
let dp = Peripherals::take().unwrap();
|
|
let clocks = dp.RCC.constrain()
|
|
.cfgr
|
|
.use_hse(HSE)
|
|
.sysclk(168.mhz())
|
|
.hclk(168.mhz())
|
|
.pclk1(32.mhz())
|
|
.pclk2(64.mhz())
|
|
.freeze();
|
|
|
|
let mut wd = IndependentWatchdog::new(dp.IWDG);
|
|
wd.start(WATCHDOG_INTERVAL.ms());
|
|
wd.feed();
|
|
|
|
timer::setup(cp.SYST, clocks);
|
|
|
|
let (pins, mut leds, mut eeprom, eth_pins, usb) = Pins::setup(
|
|
clocks, dp.TIM1, dp.TIM3,
|
|
dp.GPIOA, dp.GPIOB, dp.GPIOC, dp.GPIOD, dp.GPIOE, dp.GPIOF, dp.GPIOG,
|
|
dp.I2C1,
|
|
dp.SPI2, dp.SPI4, dp.SPI5,
|
|
dp.ADC1,
|
|
dp.OTG_FS_GLOBAL,
|
|
dp.OTG_FS_DEVICE,
|
|
dp.OTG_FS_PWRCLK,
|
|
);
|
|
|
|
leds.r1.on();
|
|
leds.g3.off();
|
|
leds.g4.off();
|
|
|
|
usb::State::setup(usb);
|
|
|
|
let mut channels = Channels::new(pins);
|
|
let _ = Config::load(&mut eeprom)
|
|
.map(|config| config.apply(&mut channels))
|
|
.map_err(|e| warn!("error loading config: {:?}", e));
|
|
|
|
// EEPROM ships with a read-only EUI-48 identifier
|
|
let mut eui48 = [0; 6];
|
|
eeprom.read_data(0xFA, &mut eui48).unwrap();
|
|
let hwaddr = EthernetAddress(eui48);
|
|
info!("EEPROM MAC address: {}", hwaddr);
|
|
|
|
net::run(clocks, dp.ETHERNET_MAC, dp.ETHERNET_DMA, eth_pins, hwaddr, |iface| {
|
|
Server::<Session>::run(iface, |server| {
|
|
leds.r1.off();
|
|
|
|
loop {
|
|
let instant = Instant::from_millis(i64::from(timer::now()));
|
|
let updated_channel = channels.poll_adc(instant);
|
|
if let Some(channel) = updated_channel {
|
|
server.for_each(|_, session| session.set_report_pending(channel.into()));
|
|
}
|
|
|
|
let instant = Instant::from_millis(i64::from(timer::now()));
|
|
cortex_m::interrupt::free(net::clear_pending);
|
|
server.poll(instant)
|
|
.unwrap_or_else(|e| {
|
|
warn!("poll: {:?}", e);
|
|
});
|
|
|
|
// TCP protocol handling
|
|
server.for_each(|mut socket, session| {
|
|
if ! socket.is_active() {
|
|
let _ = socket.listen(TCP_PORT);
|
|
session.reset();
|
|
} else if socket.can_send() && socket.can_recv() && socket.send_capacity() - socket.send_queue() > 1024 {
|
|
match socket.recv(|buf| session.feed(buf)) {
|
|
Ok(SessionOutput::Nothing) => {}
|
|
Ok(SessionOutput::Command(command)) => match command {
|
|
Command::Quit =>
|
|
socket.close(),
|
|
Command::Reporting(reporting) => {
|
|
let _ = writeln!(socket, "report={}", if reporting { "on" } else { "off" });
|
|
}
|
|
Command::Show(ShowCommand::Reporting) => {
|
|
let _ = writeln!(socket, "report={}", if session.reporting() { "on" } else { "off" });
|
|
}
|
|
Command::Show(ShowCommand::Input) => {
|
|
for channel in 0..CHANNELS {
|
|
if let Some(adc_input) = channels.channel_state(channel).get_adc() {
|
|
let vref = channels.channel_state(channel).vref;
|
|
let dac_feedback = channels.read_dac_feedback(channel);
|
|
|
|
let itec = channels.read_itec(channel);
|
|
let tec_i = (itec - vref) / ElectricalResistance::new::<ohm>(0.4);
|
|
|
|
let tec_u_meas = channels.read_tec_u_meas(channel);
|
|
|
|
let state = channels.channel_state(channel);
|
|
let _ = writeln!(
|
|
socket, "channel {}: t={:.0} adc{}={:.3} adc_r={:?} vref={:.3} dac_feedback={:.3} itec={:.3} tec={:.3} tec_u_meas={:.3} r={:.3}",
|
|
channel, state.adc_time,
|
|
channel, adc_input.into_format_args(volt, Abbreviation),
|
|
state.get_sens().map(|sens| sens.into_format_args(ohm, Abbreviation)),
|
|
vref.into_format_args(volt, Abbreviation), dac_feedback.into_format_args(volt, Abbreviation),
|
|
itec.into_format_args(volt, Abbreviation), tec_i.into_format_args(ampere, Abbreviation),
|
|
tec_u_meas.into_format_args(volt, Abbreviation),
|
|
((tec_u_meas - vref) / tec_i).into_format_args(ohm, Abbreviation),
|
|
);
|
|
} else {
|
|
let _ = writeln!(socket, "channel {}: no adc input", channel);
|
|
}
|
|
}
|
|
}
|
|
Command::Show(ShowCommand::Pid) => {
|
|
for channel in 0..CHANNELS {
|
|
let state = channels.channel_state(channel);
|
|
let _ = writeln!(socket, "PID settings for channel {}", channel);
|
|
let pid = &state.pid;
|
|
let _ = writeln!(socket, "- target={:.4} °C", pid.target);
|
|
macro_rules! show_pid_parameter {
|
|
($p: tt) => {
|
|
let _ = writeln!(
|
|
socket, "- {}={:.4}",
|
|
stringify!($p), pid.parameters.$p
|
|
);
|
|
};
|
|
}
|
|
show_pid_parameter!(kp);
|
|
show_pid_parameter!(ki);
|
|
show_pid_parameter!(kd);
|
|
show_pid_parameter!(integral_min);
|
|
show_pid_parameter!(integral_max);
|
|
show_pid_parameter!(output_min);
|
|
show_pid_parameter!(output_max);
|
|
if let Some(last_output) = pid.last_output {
|
|
let _ = writeln!(socket, "- last_output={:.3} A", last_output);
|
|
}
|
|
let _ = writeln!(socket, "");
|
|
}
|
|
}
|
|
Command::Show(ShowCommand::Pwm) => {
|
|
for channel in 0..CHANNELS {
|
|
let i_set = channels.get_i(channel);
|
|
let state = channels.channel_state(channel);
|
|
let _ = writeln!(
|
|
socket, "channel {}: PID={}",
|
|
channel,
|
|
if state.pid_engaged { "engaged" } else { "disengaged" }
|
|
);
|
|
let _ = write!(
|
|
socket, "- i_set={:.3} / {:.3} ",
|
|
i_set.0.into_format_args(ampere, Abbreviation),
|
|
i_set.1.into_format_args(ampere, Abbreviation),
|
|
);
|
|
match state.center {
|
|
CenterPoint::Vref => {
|
|
let _ = writeln!(
|
|
socket, "center=vref vref={:.3}",
|
|
state.vref.into_format_args(volt, Abbreviation),
|
|
);
|
|
}
|
|
CenterPoint::Override(volts) => {
|
|
let _ = writeln!(
|
|
socket, "center={:.3} V",
|
|
volts,
|
|
);
|
|
}
|
|
}
|
|
let max_v = channels.get_max_v(channel);
|
|
let _ = writeln!(
|
|
socket, "- max_v={:.3} / {:.3}",
|
|
max_v.0.into_format_args(volt, Abbreviation),
|
|
max_v.1.into_format_args(volt, Abbreviation),
|
|
);
|
|
let max_i_pos = channels.get_max_i_pos(channel);
|
|
let _ = writeln!(
|
|
socket, "- max_i_pos={:.3} / {:.3}",
|
|
max_i_pos.0.into_format_args(ampere, Abbreviation),
|
|
max_i_pos.1.into_format_args(ampere, Abbreviation),
|
|
);
|
|
let max_i_neg = channels.get_max_i_neg(channel);
|
|
let _ = writeln!(
|
|
socket, "- max_i_neg={:.3} / {:.3}",
|
|
max_i_neg.0.into_format_args(ampere, Abbreviation),
|
|
max_i_neg.1.into_format_args(ampere, Abbreviation),
|
|
);
|
|
}
|
|
let _ = writeln!(socket, "");
|
|
}
|
|
Command::Show(ShowCommand::SteinhartHart) => {
|
|
for channel in 0..CHANNELS {
|
|
let state = channels.channel_state(channel);
|
|
let _ = writeln!(
|
|
socket, "channel {}: Steinhart-Hart equation parameters",
|
|
channel,
|
|
);
|
|
let _ = writeln!(socket, "- t0={}", state.sh.t0.into_format_args(degree_celsius, Abbreviation));
|
|
let _ = writeln!(socket, "- b={}", state.sh.b);
|
|
let _ = writeln!(socket, "- r0={}", state.sh.r0.into_format_args(ohm, Abbreviation));
|
|
match (state.get_adc(), state.get_sens(), state.get_temperature()) {
|
|
(Some(adc), Some(sens), Some(temp)) => {
|
|
let _ = writeln!(
|
|
socket, "- adc={:.6} r={:.0} temp{}={:.3}",
|
|
adc.into_format_args(volt, Abbreviation),
|
|
sens.into_format_args(ohm, Abbreviation),
|
|
channel,
|
|
temp.into_format_args(degree_celsius, Abbreviation),
|
|
);
|
|
}
|
|
_ => {}
|
|
}
|
|
let _ = writeln!(socket, "");
|
|
}
|
|
}
|
|
Command::Show(ShowCommand::PostFilter) => {
|
|
for channel in 0..CHANNELS {
|
|
match channels.adc.get_postfilter(channel as u8).unwrap() {
|
|
Some(filter) => {
|
|
let _ = writeln!(
|
|
socket, "channel {}: postfilter={:.2} SPS",
|
|
channel, filter.output_rate().unwrap()
|
|
);
|
|
}
|
|
None => {
|
|
let _ = writeln!(
|
|
socket, "channel {}: no postfilter",
|
|
channel
|
|
);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
Command::PwmPid { channel } => {
|
|
channels.channel_state(channel).pid_engaged = true;
|
|
leds.g3.on();
|
|
let _ = writeln!(socket, "channel {}: PID enabled to control PWM", channel
|
|
);
|
|
}
|
|
Command::Pwm { channel, pin, value } => {
|
|
match pin {
|
|
PwmPin::ISet => {
|
|
channels.channel_state(channel).pid_engaged = false;
|
|
leds.g3.off();
|
|
let current = ElectricCurrent::new::<ampere>(value);
|
|
let (current, max) = channels.set_i(channel, current);
|
|
channels.power_up(channel);
|
|
let _ = writeln!(
|
|
socket, "channel {}: i_set DAC output set to {:.3} / {:.3}",
|
|
channel,
|
|
current.into_format_args(ampere, Abbreviation),
|
|
max.into_format_args(ampere, Abbreviation),
|
|
);
|
|
}
|
|
PwmPin::MaxV => {
|
|
let voltage = ElectricPotential::new::<volt>(value);
|
|
let (voltage, max) = channels.set_max_v(channel, voltage);
|
|
let _ = writeln!(
|
|
socket, "channel {}: max_v set to {:.3} / {:.3}",
|
|
channel,
|
|
voltage.into_format_args(volt, Abbreviation),
|
|
max.into_format_args(volt, Abbreviation),
|
|
);
|
|
}
|
|
PwmPin::MaxIPos => {
|
|
let current = ElectricCurrent::new::<ampere>(value);
|
|
let (current, max) = channels.set_max_i_pos(channel, current);
|
|
let _ = writeln!(
|
|
socket, "channel {}: max_i_pos set to {:.3} / {:.3}",
|
|
channel,
|
|
current.into_format_args(ampere, Abbreviation),
|
|
max.into_format_args(ampere, Abbreviation),
|
|
);
|
|
}
|
|
PwmPin::MaxINeg => {
|
|
let current = ElectricCurrent::new::<ampere>(value);
|
|
let (current, max) = channels.set_max_i_neg(channel, current);
|
|
let _ = writeln!(
|
|
socket, "channel {}: max_i_neg set to {:.3} / {:.3}",
|
|
channel,
|
|
current.into_format_args(ampere, Abbreviation),
|
|
max.into_format_args(ampere, Abbreviation),
|
|
);
|
|
}
|
|
}
|
|
}
|
|
Command::CenterPoint { channel, center } => {
|
|
let (i_tec, _) = channels.get_i(channel);
|
|
let state = channels.channel_state(channel);
|
|
state.center = center;
|
|
if !state.pid_engaged {
|
|
channels.set_i(channel, i_tec);
|
|
let _ = writeln!(
|
|
socket, "channel {}: center point updated, output readjusted for {:.3}",
|
|
channel, i_tec.into_format_args(ampere, Abbreviation),
|
|
);
|
|
} else {
|
|
let _ = writeln!(
|
|
socket, "channel {}: center point updated",
|
|
channel,
|
|
);
|
|
}
|
|
}
|
|
Command::Pid { channel, parameter, value } => {
|
|
let pid = &mut channels.channel_state(channel).pid;
|
|
use command_parser::PidParameter::*;
|
|
match parameter {
|
|
Target => {
|
|
pid.target = value;
|
|
// reset pid.integral
|
|
pid.reset();
|
|
}
|
|
KP =>
|
|
pid.parameters.kp = value as f32,
|
|
KI =>
|
|
pid.parameters.ki = value as f32,
|
|
KD =>
|
|
pid.parameters.kd = value as f32,
|
|
OutputMin =>
|
|
pid.parameters.output_min = value as f32,
|
|
OutputMax =>
|
|
pid.parameters.output_max = value as f32,
|
|
IntegralMin =>
|
|
pid.parameters.integral_min = value as f32,
|
|
IntegralMax =>
|
|
pid.parameters.integral_max = value as f32,
|
|
}
|
|
let _ = writeln!(socket, "PID parameter updated");
|
|
}
|
|
Command::SteinhartHart { channel, parameter, value } => {
|
|
let sh = &mut channels.channel_state(channel).sh;
|
|
use command_parser::ShParameter::*;
|
|
match parameter {
|
|
T0 => sh.t0 = ThermodynamicTemperature::new::<degree_celsius>(value),
|
|
B => sh.b = value,
|
|
R0 => sh.r0 = ElectricalResistance::new::<ohm>(value),
|
|
}
|
|
let _ = writeln!(socket, "Steinhart-Hart equation parameter updated");
|
|
}
|
|
Command::PostFilter { channel, rate } => {
|
|
let filter = ad7172::PostFilter::closest(rate);
|
|
match filter {
|
|
Some(filter) => {
|
|
channels.adc.set_postfilter(channel as u8, Some(filter)).unwrap();
|
|
let _ = writeln!(
|
|
socket, "channel {}: postfilter set to {:.2} SPS",
|
|
channel, filter.output_rate().unwrap()
|
|
);
|
|
}
|
|
None => {
|
|
let _ = writeln!(socket, "Unable to choose postfilter");
|
|
}
|
|
}
|
|
}
|
|
Command::Load => {
|
|
match Config::load(&mut eeprom) {
|
|
Ok(config) => {
|
|
config.apply(&mut channels);
|
|
let _ = writeln!(socket, "Config loaded from EEPROM.");
|
|
}
|
|
Err(e) => {
|
|
let _ = writeln!(socket, "Error: {:?}", e);
|
|
}
|
|
}
|
|
}
|
|
Command::Save => {
|
|
let config = Config::new(&mut channels);
|
|
match config.save(&mut eeprom) {
|
|
Ok(()) => {
|
|
let _ = writeln!(socket, "Config saved to EEPROM.");
|
|
}
|
|
Err(e) => {
|
|
let _ = writeln!(socket, "Error saving config: {:?}", e);
|
|
}
|
|
}
|
|
}
|
|
Command::Reset => {
|
|
SCB::sys_reset();
|
|
}
|
|
}
|
|
Ok(SessionOutput::Error(e)) => {
|
|
let _ = writeln!(socket, "Command error: {:?}", e);
|
|
}
|
|
Err(_) =>
|
|
socket.close(),
|
|
}
|
|
} else if socket.can_send() && socket.send_capacity() - socket.send_queue() > 256 {
|
|
while let Some(channel) = session.is_report_pending() {
|
|
let state = &mut channels.channel_state(usize::from(channel));
|
|
let adc_data = state.adc_data.unwrap_or(0);
|
|
let _ = writeln!(
|
|
socket, "t={} raw{}=0x{:06X} value={}",
|
|
state.adc_time, channel, adc_data,
|
|
state.get_adc().unwrap().into_format_args(volt, Abbreviation),
|
|
).map(|_| {
|
|
session.mark_report_sent(channel);
|
|
});
|
|
}
|
|
}
|
|
});
|
|
|
|
// Update watchdog
|
|
wd.feed();
|
|
|
|
leds.g4.off();
|
|
cortex_m::interrupt::free(|cs| {
|
|
if !net::is_pending(cs) {
|
|
// Wait for interrupts
|
|
// (Ethernet, SysTick, or USB)
|
|
wfi();
|
|
}
|
|
});
|
|
leds.g4.on();
|
|
}
|
|
});
|
|
});
|
|
|
|
unreachable!()
|
|
}
|